Description
TDK ZUG2206-11 Power Line Noise Filter IEC Inlet 250V 6A 50/60Hz EMI
Single-phase power line EMI filter designed to suppress conducted noise on AC mains. Panel-mount module with IEC C14 inlet connector rated 250V AC, 6A at 50/60Hz frequencies.
Specifications & What's Included
- Model: ZUG2206-11 (TDK)
- Type: Power Entry Module / Panel Mount EMI Filter
- Voltage Rating: 250V AC
- Current Rating: 6A
- Frequency: 50/60Hz
- Inductance: 500µH
- X Capacitance: 0.047µF (X2)
- Y Capacitance: 2×2200pF
- Inlet: IEC C14
- UL Listed
- Manufactured in Japan
- Unit only—no accessories included
Applications
Power line filters of this type are used in industrial control systems, telecom equipment, test instrumentation, and laboratory devices to reduce electromagnetic interference conducted back into the AC supply. Commonly integrated into equipment enclosures and power distribution panels where noise suppression is required to meet regulatory compliance and protect sensitive circuitry.
Condition: Used
This TDK ZUG2206-11 Power Line Noise Filter has been inspected and is in good used condition. The chrome metal housing shows minor surface scuffs consistent with prior installation and removal, and the IEC C14 inlet and solder tab terminals appear intact and undamaged. The label is clearly legible with all spec markings visible. This unit was pulled from a working environment. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This TDK ZUG2206-11 Power Line Noise Filter has been inspected and is in good used condition. The chrome metal housing shows minor surface scuffs consistent with prior installation and removal, and the IEC C14 inlet and solder tab terminals appear intact and undamaged. The label is clearly legible with all spec markings visible. This unit was pulled from a working environment. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
TDK |
Model: |
ZUG2206-11 |
MPN: |
ZUG2206-11 |
Type: |
Power Line Noise Filter / EMI Filter with IEC Inlet |
SKU: |
12117 |
Voltage Rating: |
250V AC |
Current Rating: |
6A |
Frequency: |
50/60Hz |
Inductance: |
L-500µH |
X Capacitance: |
X2-0.047µF |
Y Capacitance: |
Y-2x2200pF |
Inlet Connector Type: |
IEC C14 |
Filter Configuration: |
Single Phase |
Certifications: |
UL Listed |
Country/Region of Manufacture: |
Japan |
Form Factor: |
Panel Mount / Power Entry Module |
Condition: |
Used – Inspected |
Seller Notes: |
Unit only — no additional accessories included. |
Condition Notes: |
TDK ZUG2206-11 Power Line Noise Filter in good used condition. Housing shows minor scuffs from prior use. IEC inlet and solder terminals intact. Label fully legible. Pulled from a working environment. |
