Rudolph

Rudolph Model 600 Bi-Polar DC Power Supply 175VDC Output 115VAC Benchtop

(No reviews yet) Write a Review
SKU:
9205
MPN:
Model 600
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
19.00 LBS
Shipping:
Calculated at Checkout
  • Rudolph Model 600 Bi-Polar DC Power Supply – three-quarter front-left view showing power cord, ON/OFF switch, and front panel label
  • Rudolph Model 600 Power Supply – front panel close-up showing ON/OFF rocker switch, red pilot light, Normal/Reverse toggle, calibration sticker, and brand label
  • Rudolph Model 600 Power Supply – rear panel view showing output connector and sticky note; handle visible on right side
  • Rudolph Model 600 Power Supply – close-up of brand logo and model designation label reading 'RUDOLPH MODEL 600 POWER SUPPLY'
  • Rudolph Model 600 Power Supply – interior view showing transformer, rectifier board, filter capacitor, and internal wiring
$65.00
Was: $125.00
Current Stock: 1

Sold Out

Description

Rudolph Model 600 Bi-Polar DC Power Supply 175VDC Output 115VAC Benchtop

A benchtop bi-polar DC power supply that converts 115VAC input to 175VDC output. Features switchable polarity for reversible DC applications.

Specifications & What's Included

  • Output Voltage: 175 VDC
  • Input Voltage: 115 VAC
  • Polarity: Bi-Polar with Normal/Reverse toggle switch
  • Controls: ON/OFF rocker switch, pilot lamp indicator
  • Form Factor: Benchtop unit only
  • Manufactured in the United States

Applications

Bi-polar DC power supplies were commonly used in telecommunications and industrial test equipment for applications requiring switchable polarity. These units are typically found in benchtop laboratory and service environments for testing, maintenance, and development work where reversible DC voltage is needed.

Condition: Used
This Rudolph Model 600 Bi-Polar DC Power Supply has been inspected and appears to be in good used condition. The case shows general surface wear and some scuffing consistent with bench use, and a calibration sticker on the front panel notes no calibration is required. The ON/OFF rocker switch, red pilot indicator, and Normal/Reverse polarity toggle are all present and intact. The interior shows a transformer, rectifier board, and filter capacitor in normal used condition with no obvious damage. The unit was pulled from a working environment. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Rudolph
Model:
Model 600
MPN:
Model 600
Type:
Bi-Polar DC Power Supply
SKU:
9205
Condition:
Used – Pulled from Working Environment
Output Voltage:
175 VDC
Input Voltage:
115 VAC
Polarity:
Bi-Polar (Normal / Reverse switch)
Form Factor:
Benchtop
Power Requirements:
115V AC
Controls:
ON/OFF rocker switch, Normal/Reverse toggle
Indicator:
Red pilot lamp
Seller Notes:
Unit only — no accessories included
Country/Region of Manufacture:
United States
Condition Notes:
Rudolph Model 600 Bi-Polar DC Power Supply in good used condition. Case shows surface wear; all front-panel controls present and intact. Pulled from a working environment. No accessories included. Please contact us with any questions.
View AllClose

Related Products

Related Products

ERA Transpac LS324 DC Power Supply — left side and rear view showing black aluminum chassis and vent slots ERA Transpac LS324 Power Supply — right side view showing large finned aluminum heatsink with four output transistors
Add to Cart
Quick view

ERA Transpac LS324 DC Power Supply 32VDC 4A 115VAC Input Benchtop w/ Sense

Transpac

$75.00
Was: $150.00
ERA Transpac LS324 DC Power Supply 32VDC 4A 115VAC Input Benchtop w/ SenseThe ERA Transpac LS324 is a fixed-output DC linear power supply manufactured by ERA Transpac Corp of Moonachie, New Jersey...
9221
SKU:
9221
Availability:
Usually ships within 1-2 business days.
Weight:
26.00 LBS
Brand:
ERA Transpac Corp
Model:
LS324
MPN:
LS324
Type:
DC Linear Bench Power Supply
SKU:
9221
Output Voltage:
32VDC (fixed)
Output Current:
4A
Input Voltage:
115VAC
Number of Outputs:
1
Output Type:
Fixed DC
Sense Terminals:
Yes — R− and R+ remote sense terminals
Terminal Type:
Screw Terminal Block
Terminal Labels:
HI AC, LO AC, GND, R−, −, +, R+
Form Factor:
Benchtop / Desktop
Cooling:
Passive — finned aluminum heatsink
Enclosure:
Black anodized aluminum chassis
Country/Region of Manufacture:
United States
Manufacturer Location:
Moonachie, NJ
Condition:
Used — Inspected, condition not fully documented
Seller Notes:
Unit only — no accessories included
Condition Notes:
ERA Transpac LS324 DC Power Supply, used surplus. No documented test or working status on file. Cosmetic wear consistent with prior use. Rating plate and terminal block visible and intact. Please contact us with questions.
Power One PR1857 dual output ±5V DC bench power supply — front panel with red power switch and banana jack output terminals labeled 5V POS, POS RET, NEG RET, 5V NEG Power One PR1857 bench power supply — rear view showing gray metal enclosure and attached AC power cord
Add to Cart
Quick view

Power One PR1857 Dual Output ±5V DC Lab Bench Power Supply 115VAC Banana

Power One

$35.00
Was: $70.00
Power One PR1857 Dual Output ±5V DC Lab Bench Power Supply 115VAC BananaDual output benchtop DC power supply providing regulated ±5V output from 115V AC input. Delivers separate positive and negative...
32804
SKU:
32804
Availability:
Usually ships within 1–2 business days.
Weight:
11.00 LBS
Brand:
Power One
Model:
PR1857
MPN:
PR1857
Type:
Dual Output DC Bench Power Supply
SKU:
32804
Input Voltage:
115V AC
Output Voltage:
±5V DC (positive and negative 5V)
Number of Outputs:
2 (bipolar: +5V and -5V)
Output Connector:
Banana Jacks
Power Requirements:
115V AC, 60Hz
Form Factor:
Benchtop
Enclosure:
Metal chassis, gray finish
Condition:
Used – Inspected and Tested
Seller Notes:
Includes attached AC power cord. Unit tested and working.
Country/Region of Manufacture:
United States
Condition Notes:
Power One PR1857 ±5V DC bench power supply. Tested at our facility and in good working order. Good used condition with light surface wear. Includes attached AC power cord. All banana jack terminals intact.
Avantek PS-110-002 power supply front panel showing DC Output connector J1, 2A fuse, and P1 115VAC input connector with label Avantek PS-110-002 outdoor enclosure power supply — top and rear view of aluminum housing with bolt-flange mounting base
Add to Cart
Quick view

Avantek PS-110-002 115VAC Input DC Output Power Supply Outdoor Enclosure Satcom

Avantek

$500.00
Was: $1,000.00
Avantek PS-110-002 115VAC Input DC Output Power Supply Outdoor Enclosure SatcomAC to DC power supply housed in a weatherproof aluminum enclosure. Converts 115V AC input to DC output for satcom and RF...
31998
SKU:
31998
Availability:
Usually ships within 1–2 business days.
Weight:
18.00 LBS
Brand:
Avantek
Model:
PS-110-002
MPN:
PS-110-002
Type:
AC to DC Power Supply, Outdoor Enclosure
SKU:
31998
Input Voltage:
115V AC
Input Connector:
P1 — 3-pin circular military-style connector
Output Type:
DC
Output Connector:
J1 — multi-pin circular connector (DC Output)
Fuse Rating:
2A
Enclosure Type:
Outdoor / Weatherproof Aluminum Enclosure
Form Factor:
Standalone / Chassis Mount
Power Requirements:
115V AC Input
Country/Region of Manufacture:
United States
Condition:
Used – Inspected, Good Condition
Seller Notes:
Unit only; no cables or accessories included.
Compatible With:
Avantek RF/Satcom amplifier systems
Condition Notes:
Avantek PS-110-002 115VAC DC Power Supply inspected and in good used condition. Outdoor aluminum enclosure shows minor surface scuffing and light soiling. Front-panel connectors and 2A fuse holder present and intact.
RJD Controls Model 3 Variac Voltage Timer Control – front panel showing voltage control knob, coil switch, DC ammeter, and power LED RJD Controls Model 3 Variac – rear panel showing Time Ranger timer module, AMP selector, push-to-start button, DB9 output connector, IEC power inlet, and 115VAC marking
Add to Cart
Quick view

RJD Controls Model 3 Variac Voltage Timer Control 115VAC DC Ammeter Benchtop

RJD Controls

$75.00
Was: $150.00
RJD Controls Model 3 Variac Voltage Timer Control 115VAC DC Ammeter BenchtopBenchtop variac control unit with integrated Time Ranger timer module. Provides variable AC voltage output with integrated...
26686
SKU:
26686
Availability:
Usually ships within 1–2 business days.
Weight:
7.00 LBS
Brand:
RJD Controls
Model:
Model 3
MPN:
Model 3
Type:
Variac Voltage & Timer Control
SKU:
26686
Condition:
As-Is / For Parts or Not Working
Seller Notes:
Sold as-is for parts or repair; includes Time Ranger timer module
Form Factor:
Benchtop
Power Requirements:
115VAC
Input Voltage:
115VAC
Output Connector:
DB9 (9-pin D-sub)
Current Meter Range:
0–5 DC Amperes
Controls:
Voltage knob, Coil switch, Power switch, Push-to-start
Timer Module:
Time Ranger (integrated)
Indicators:
Power LED (green), Current meter
Country/Region of Manufacture:
United States
Condition Notes:
RJD Controls Model 3 Variac Voltage Timer Control sold AS-IS for parts or repair. Not tested or guaranteed functional. Cosmetically intact with normal wear. All visible components present. Contact us with questions.