Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
Texscan RA-73 Adjustable Step RF Attenuator SMA Female Connectors 0-10 dB
Texscan
$65.00Was: $125.00Texscan RA-73 Adjustable Step RF Attenuator SMA Female Connectors 0-10 dB The Texscan RA-73 is a handheld inline RF attenuator with SMA female connectors. It provides adjustable attenuation in 11 discrete steps from 0 to 10 dB via rotary dial selection...48691- SKU:
- 48691
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Texscan
- Model:
- RA-73
- MPN:
- RA-73
- Type:
- Adjustable Step RF Attenuator
- SKU:
- 48691
- Connector Type:
- SMA Female
- Number of Connectors:
- 2
- Attenuation Range:
- 0–10 dB (11 steps)
- Adjustment Type:
- Rotary Dial (Step)
- Measured Impedance Range:
- 4.8–13.0 Ohm (center pin, approximate)
- Zo (Reference) Reading:
- 155.8 Ohm (approximate, multimeter)
- Form Factor:
- Handheld / Inline
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit only. Staff measured resistance at each of 11 dial positions.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Texscan RA-73 RF attenuator inspected and in working condition. Resistance measured at all 11 dial positions (4.8–13.0 Ohm) plus Zo (155.8 Ohm). Light surface wear; SMA connectors show minor tarnish. Please contact us with any questions.
$65.00Was: $125.00 -
Omega Engineering Model 199 Digital Thermometer 199-KC-X-X K-Type 117VAC
Omega Engineering
$85.00Was: $175.00Omega Engineering Model 199 Digital Thermometer 199-KC-X-X K-Type 117VACThe Omega Engineering Model 199 is a compact benchtop and panel-mount digital thermometer designed for use with K-type (Chromel/Alumel) thermocouples. It accepts a standard miniature...48651- SKU:
- 48651
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Omega Engineering
- Model:
- 199
- MPN:
- 199-KC-X-X
- SKU:
- 48651
- Type:
- Digital Thermometer
- Thermocouple Type:
- K-Type (Chromel/Alumel)
- Display Type:
- LED Digital Readout
- Temperature Unit:
- Celsius (°C)
- Power Requirements:
- 117VAC
- Input Connector:
- Standard miniature thermocouple plug (yellow)
- Form Factor:
- Benchtop / Panel Mount
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes attached yellow K-type thermocouple lead and AC power cord
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Omega Engineering Model 199 Digital Thermometer (199-KC-X-X) inspected and in good used condition. Includes yellow K-type thermocouple lead and AC power cord. Light wear on housing and label; plug prongs show minor oxidation.
$85.00Was: $175.00 -
Weidmuller Assorted White Cable Conduit Markers Blank & Numbered ESG SFX SFC
LOT of 2
$35.00Was: $70.00Weidmuller Assorted White Cable Conduit Markers Blank & Numbered ESG SFX SFCThis is an assorted lot of Weidmuller white plastic cable and conduit markers, including both blank markers and strips with pre-printed sequential identification numbers. The...48622- SKU:
- 48622
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Weidmuller
- Model:
- ESG / SFX / SFC Series
- MPN:
- ESG 9/20, SFX 10/23, SFC 2/21, ESG 9/17K
- Type:
- Cable / Conduit Markers
- SKU:
- 48622
- Color:
- White
- Marking:
- Blank and Pre-Numbered (assorted)
- Series:
- ESG, SFX, SFC
- Application:
- Wire, Cable, and Conduit Identification
- Material:
- Plastic
- Quantity:
- Lot / Assorted (multiple sheets — see photos)
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Assorted lot; includes blank and numbered markers across ESG, SFX, SFC series in original Weidmuller box.
- Country/Region of Manufacture:
- Germany
- Condition Notes:
- Lot of Weidmuller white cable/conduit markers (ESG, SFX, SFC series) inspected and in good condition. Mix of blank and pre-numbered strips in original box with normal shelf wear. Markers appear clean and undamaged.
$35.00Was: $70.00 -
Manhattan M4201 MIL-C-17D RG8A/U RF Coax Cable 18 ft N-Type UG-21 Connectors
Manhattan
$70.00Was: $150.00Manhattan M4201 MIL-C-17D RG8A/U RF Coax Cable 18 ft N-Type UG-21 ConnectorsRF coaxial cable assembly rated to MIL-C-17D specifications. Transmits RF signals between radio equipment, antennas, and test instruments with 50 ohm impedance and low signal...48474- SKU:
- 48474
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Manhattan
- Model:
- M4201
- MPN:
- M4201
- Secondary Model:
- 74868
- Type:
- RF Coaxial Cable Assembly
- Cable Type:
- RG8A/U (MIL-C-17D)
- Military Specification:
- MIL-C-17D
- Cable Standard:
- RG8A/U
- Connector Type:
- N-Type (UG-21 / 74868)
- Connector Part Number:
- 74868 / UG-21
- Cable Length:
- 18 ft (18 feet)
- Impedance:
- 50 Ohm
- Application:
- RF, Radio, Laboratory, Military, Antenna
- Jacket Color:
- Black
- SKU:
- 48474
- Condition:
- Used – Inspected
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Manhattan M4201 MIL-C-17D RG8A/U RF coax cable, 18 ft, inspected and in good used condition. Jacket intact, no cuts or kinks. N-type connectors show light surface oxidation typical of age. Center pins and dielectric appear intact.
$70.00Was: $150.00 -
Hughes 7742917 RZ Tone Digital VME Board Card 7729307-099 Satellite Command
Hughes
$150.00Was: $300.00Hughes 7742917 RZ Tone Digital VME Board Card 7729307-099 Satellite CommandRZ Tone Digital VME board card assembly for satellite command generation. Designed for use in Hughes/SSEL ground support command systems and compatible with the Hughes/SSEL...48328- SKU:
- 48328
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Hughes
- Model:
- 7742917
- MPN:
- 7742917
- Secondary Model:
- 7729307-099
- SKU:
- 48328
- Type:
- RZ Tone Digital VME Board Card Assembly
- Form Factor:
- VME Card/Module
- Compatible With:
- Hughes/SSEL 7746600-100 Command Generator VME
- Application:
- Satellite Command Generation / Satcom Ground Support
- Bus Interface:
- VME (Versa Module Europa)
- Connector Type:
- High-density DIN VME backplane connectors
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Card only; pulled from Hughes/SSEL 7746600-100 Command Generator VME
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Hughes 7742917 RZ Tone Digital VME Board Card (7729307-099) inspected and in good condition. Pulled from a Hughes/SSEL 7746600-100 Command Generator VME. Board and connectors intact with normal light wear.
$150.00Was: $300.00 -
SMC VX2130M Direct Operated 2-Port Solenoid Valve Vacuum 1/4 FNPT DC 24V
SMC
$65.00Was: $125.00SMC VX2130M Direct Operated 2-Port Solenoid Valve Vacuum 1/4 FNPT DC 24VThe SMC VX2130M is a direct operated, 2-port (2-way) solenoid valve designed specifically for vacuum service. Made in Japan by SMC Corporation, this valve uses a solenoid coil to...48119- SKU:
- 48119
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- SMC
- Model:
- VX2130M
- MPN:
- VX2130M
- Type:
- Direct Operated 2-Port Solenoid Valve
- SKU:
- 48119
- Number of Ports:
- 2
- Port Size:
- 1/4 FNPT
- Port Thread Type:
- FNPT (Female NPT)
- Actuation Type:
- Direct Operated (Solenoid)
- Valve Function:
- 2-Port / 2-Way
- Pressure Rating:
- for Vacuum to 10 Torr
- Orifice Size:
- 4.5 mm
- Coil Voltage:
- DC 24V
- Insulation Class:
- Class B
- Coil Type:
- DC
- Media:
- Vacuum / Air
- Country/Region of Manufacture:
- Japan
- Mounting:
- Bracket mounted (bracket included)
- Condition:
- Used – Inspected
- Seller Notes:
- Includes mounting bracket and lead wire with coil connector.
- Condition Notes:
- SMC VX2130M Direct Operated 2-Port Solenoid Valve. Inspected and in good used condition. Body shows light surface discoloration from prior use. FNPT port and bracket intact. Lead wire included.
$65.00Was: $125.00 -
SMC VNA111A 2-Way Process Valve 1/8 FNPT 0-1MPa Pilot Operated w/ Solenoid
SMC
$28.00Was: $60.00SMC VNA111A 2-Way Process Valve 1/8 FNPT 0-1MPa Pilot Operated w/ SolenoidThe SMC VNA111A is a 2-way (2-port) pilot-operated process valve from SMC Corporation's VNA series. It uses a pneumatic pilot signal to actuate the main valve, with the solenoid...48114- SKU:
- 48114
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- SMC
- Model:
- VNA111A
- MPN:
- VNA111A
- Type:
- 2-Way Pilot-Operated Process Valve
- SKU:
- 48114
- Valve Configuration:
- 2-Way (2-Port)
- Actuation Type:
- Pilot Operated with Solenoid
- Port Size:
- 1/8 FNPT
- Main Pressure Range:
- 0–1 MPa
- Pilot Pressure Range:
- 0.2–0.7 MPa
- Valve Series:
- VNA
- Body Material:
- Metal (aluminum alloy body)
- Connector Type:
- Push-in tube fittings (blue, elbow type)
- Mounting:
- Bracket mount
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Inspected and Pulled from Working Environment
- Seller Notes:
- Includes solenoid operator and wiring harness with cable
- Condition Notes:
- SMC VNA111A 2-Way Process Valve inspected and in good used condition. Shows normal surface wear. Push-in fittings and solenoid intact. Wiring harness included. Please contact us with any questions.
$28.00Was: $60.00 -
Teledyne Taber 176-SA Pressure Transducer 0-500 PSI 350 Ohm Strain Gauge
Teledyne Taber
$125.00Was: $250.00Teledyne Taber 176-SA Pressure Transducer 0-500 PSI 350 Ohm Strain GaugeThe Teledyne Taber 176-SA is a strain-gauge pressure transducer manufactured by Taber Instrument Corporation of North Tonawanda, NY, under the Teledyne brand. It uses a Wheatstone...48038- SKU:
- 48038
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Teledyne Taber
- Model:
- 176-SA
- MPN:
- 176-SA
- Type:
- Strain Gauge Pressure Transducer
- SKU:
- 48038
- Pressure Range:
- 0-500 PSI
- Bridge Resistance:
- 350 Ohms
- Transducer Technology:
- Strain Gauge (Wheatstone Bridge)
- Body Material:
- Stainless Steel
- Pressure Port:
- AN/MS-style male fitting (top)
- Electrical Connector:
- Multi-pin circular connector (bottom)
- Manufacturer:
- Taber Instrument Corporation
- Manufacturer Location:
- North Tonawanda, NY
- Country/Region of Manufacture:
- United States
- Application:
- Aerospace, rocket motor, industrial pressure measurement
- Form Factor:
- Inline / Cylindrical
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- Teledyne Taber 176-SA Pressure Transducer pulled from a working environment. Inspected and in good used condition. Stainless body shows field service wear and scuffing. Label legible. Connector and pressure port intact.
$125.00Was: $250.00