Unbranded
-
Unbranded Wafer Semiconductor Process Chuck Assembly w/ Mesh Gas Dist Fittings
Unbranded
$3,000.00Was: $6,000.00Semiconductor Wafer Process Chuck Assembly w/ Mesh Gas Dist Fittings Thermocouple This is a wafer process chuck assembly used in semiconductor fabrication equipment. The unit features a circular...53378- SKU:
- 53378
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- Unknown – see photos
- Type:
- Wafer Process Chuck Assembly
- SKU:
- 53378
- Condition:
- Used – Pulled from Working Environment
- Application:
- Semiconductor wafer processing – plasma etch, CVD, RIE
- Gas Distribution:
- Circular fine wire mesh face for backside gas or showerhead
- Number of Fittings:
- 3 tube fittings visible (fluid/gas ports)
- Fitting Type:
- Threaded tube fittings, compression style
- Wiring / Sensors:
- Thermocouple and/or signal wiring attached (black and white)
- Housing Material:
- Stainless steel or hard-anodized aluminum
- Form Factor:
- D-shaped / tombstone enclosure
- Fasteners:
- Multiple perimeter screws securing top plate and body
- Compatible With:
- Semiconductor process chamber – specific tool unknown
- Seller Notes:
- Chuck assembly with attached tubing and wiring; no mounting hardware or documentation included.
- Condition Notes:
- Used wafer process chuck pulled from working environment. Enclosure shows normal surface scuffing. Mesh face intact. Three fittings and wiring included. No legible brand or model. Review photos carefully.
$3,000.00Was: $6,000.00 -
AT Power Supply 250W 12-Pin Vintage Desktop 386 486 Pentium w/ Power Switch
Unbranded
$40.00Was: $95.00AT Power Supply 250W 12-Pin Vintage Desktop 386 486 Pentium w/ Power Switch A Dynapower 250W AT-form-factor power supply for legacy desktop computers. Delivers 250 watts via dual 12-pin AT...52783- SKU:
- 52783
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Dynapower
- Model:
- AT Power Supply 250W
- MPN:
- 94093615
- SKU:
- 52783
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes power switch cable for front-panel routing
- Form Factor:
- AT Desktop
- Power Output:
- 250W
- Connector Type:
- 12-Pin Two-Cable AT Motherboard Connector
- Compatible With 1:
- 386, 486, and early Pentium AT motherboards
- Compatible With 2:
- Standard AT desktop tower and mini-tower cases
- Power Requirements:
- 115/230V AC, 50/60Hz (voltage selector switch)
- Cooling:
- Internal fan — rear exhaust
- Output Connectors:
- Dual 6-pin AT motherboard plugs, Molex 4-pin drive
- Country of Manufacture:
- Unknown
- Condition Notes:
- This Dynapower 250W AT power supply has been tested at our facility and is in good working order. Chassis shows typical cosmetic wear. Includes dual AT motherboard connectors and front-panel power switch cable. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $95.00 -
6V DC Gear Motor 037 01-14-L33 6VDC Dual Shaft Small Gearmotor w/ Leads
Unbranded
$15.00Was: $30.006V DC Gear Motor 037 01-14-L33 6VDC Dual Shaft Small Gearmotor w/ Leads A compact DC gear motor rated for 6V operation with dual output shafts. This unit combines a DC motor with internal gearing to...51861- SKU:
- 51861
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Unbranded
- Model:
- 037 01-14-L33
- MPN:
- 037 01-14-L33
- SKU:
- 51861
- Condition:
- Used – Inspected
- Seller Notes:
- Includes red and white wire leads. No additional accessories included.
- Form Factor:
- Compact / Inline Gearmotor
- Voltage Rating:
- 6V DC
- Power Requirements:
- 6 VDC
- Output Shaft:
- Dual Shaft
- Motor Type:
- DC Gear Motor
- Lead Wires:
- Red and White Leads Attached
- Housing Color:
- Black
- Country of Manufacture:
- Unknown
- Condition Notes:
- This 6V DC Gear Motor (part number 037 01-14-L33) is in good used condition. The motor body is intact with no visible cracks or major damage. The label is present and legible, showing the part number and 6VDC rating.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$15.00Was: $30.00 -
Stainless Steel Bottom Knife Ring Slitter 5.906" OD x 4.0005" ID Slitting Blade
Unbranded
$149.00Was: $300.00Stainless Steel Bottom Knife Ring Slitter 5.906" OD x 4.0005" ID Slitting Blade Bottom knife ring slitter used in converting and slitting machinery. Designed to cut materials in line with companion...51767- SKU:
- 51767
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Unbranded
- Type:
- Bottom Knife Ring Slitter
- SKU:
- 51767
- Outer Diameter (OD):
- 5.906 in
- Inner Diameter (ID):
- 4.0005 in
- Material:
- Stainless Steel
- Application:
- Slitting, Converting, Industrial Cutting
- Compatible Materials:
- Paper, Plastic Film, Foil, Flexible Packaging
- Condition:
- Used – Inspected
- Country/Region of Manufacture:
- Unknown
- Condition Notes:
- Used Stainless Steel Bottom Knife Ring Slitter 5.906" OD x 4.0005" ID. Good condition, typical handling marks. Rubber seal intact, cutting edge undamaged. Ready for use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$149.00Was: $300.00 -
200ft 5-Pin Male Female Extension Data Cable on Orange Spool 60M Gray
Unbranded
$55.00Was: $100.00200ft 5-Pin Male Female Extension Data Cable on Orange Spool 60M Gray5-pin circular connector extension cable rated for industrial and telecom data applications. This male-to-female configuration...50069- SKU:
- 50069
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 11.00 LBS
- Brand:
- Unbranded
- Model:
- 5-Pin Male/Female Extension Data Cable
- Type:
- Data Extension Cable
- Connector Type:
- 5-Pin Circular (Male / Female)
- Cable Length:
- 200 ft (approx. 60 m)
- Cable Color:
- Gray
- Includes:
- Orange cable storage spool with handle
- Gender:
- Male to Female
- Number of Pins:
- 5
- SKU:
- 50069
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes orange storage spool; 5-pin male and female connectors on each end
- Condition Notes:
- 200ft 5-pin male/female data cable inspected and in good used condition. Pulled from a working environment. Gray jacket shows light normal wear; connectors intact. Orange spool included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
GPIB IEEE-488 Cable 1m CEC 01000-90001 HP 10833A Style Straight Connector HPIB
Unbranded
$28.00Was: $60.00GPIB IEEE-488 Cable 1m CEC 01000-90001 HP 10833A Style Straight Connector HPIBIEEE-488 instrument bus cable used to connect GPIB-compatible test equipment, data acquisition systems, and controllers...49685- SKU:
- 49685
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- CEC
- Model:
- 01000-90001
- MPN:
- 01000-90001
- Type:
- GPIB / IEEE-488 Instrument Bus Cable
- SKU:
- 49685
- Compatible With:
- HP 10833A style GPIB instruments and controllers
- Connector Type:
- 24-pin Micro-Ribbon (Amphenol IEEE-488), Straight
- Cable Length:
- 1 Meter (3.3 ft)
- Interface:
- GPIB / IEEE-488 / HPIB
- Number of Connectors:
- 2 (one each end, straight)
- Cable Standard:
- IEEE-488 / IEC-625
- Wire Type:
- AWM 2464
- Temperature Rating:
- 75°C
- Cable Certifications:
- UL (E123143), CSA, Type CL2
- Country/Region of Manufacture:
- Taiwan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- CEC-labeled 1m GPIB cable, HP 10833A style, inspected and in good condition
- Condition Notes:
- CEC 01000-90001 GPIB IEEE-488 1m cable inspected and in good used condition. Jacket clean and intact, both connectors in good shape, no bent pins noted. Pulled from a working lab environment.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
Custom Water Filtration Enclosure 30x21.75x23.25 Advantec Filter Flowmeter
Unbranded
$275.00Was: $550.00Custom Water Filtration Enclosure 30x21.75x23.25 Advantec Filter FlowmeterFloor-standing water filtration unit built from painted steel sheet metal. Houses an Advantec filter holder, rotameter...49423- SKU:
- 49423
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 124.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Water Filtration Enclosure
- Type:
- Water Filtration Enclosure
- SKU:
- 49423
- Seller Notes:
- Includes Advantec filter holder, rotameter flowmeter, and PVC ball valve
- Overall Dimensions:
- 30" L x 21.75" W x 23.25" H
- Enclosure Material:
- Painted steel sheet metal
- Mounting:
- Floor-standing on leveling feet/casters
- Included Components:
- Advantec filter housing, rotameter flowmeter, PVC ball valve
- Filter Brand:
- Advantec
- Valve Type:
- PVC true union ball valve
- Flow Indicator:
- Rotameter / variable area flowmeter
- Inlet/Outlet Fittings:
- Two threaded hose-barb/compression fittings on rear panel
- Piping Material:
- PVC schedule pipe and fittings
- Application:
- Laboratory or industrial process water filtration
- Condition:
- Used – Inspected and in Good Condition
- Condition Notes:
- Used custom water filtration enclosure; inspected and in good condition. Outer cabinet shows scuffs and paint chips; external brass fittings show corrosion. Interior PVC plumbing, Advantec filter, flowmeter, and ball valve appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Unbranded 3-Pole Molded Case Circuit Breaker Heavy Duty Industrial MCCB
Unbranded
$30.00Was: $60.00Unbranded 3-Pole Molded Case Circuit Breaker Heavy Duty Industrial MCCBThis is a heavy-duty 3-pole molded case circuit breaker (MCCB) of unknown manufacture, pulled from an industrial environment...46232- SKU:
- 46232
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 9.00 LBS
- Brand:
- Unbranded
- Model:
- Unknown
- Type:
- Molded Case Circuit Breaker (MCCB)
- SKU:
- 46232
- Number of Poles:
- 3
- Trip Current:
- Unknown — see photos
- Breaker Style:
- Molded Case
- Mechanism:
- Thermal-Magnetic (likely — trip adjusters visible)
- Trip Adjustment:
- Lo/Hi adjustable — 3 sets of Lo/Hi screws visible
- Terminal Type:
- Lug / Bolt-on
- Connection:
- Top line / bottom load
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Trip current unknown. Inspect photos carefully before purchasing.
- Form Factor:
- Bolt-on / Panel Mount
- Condition Notes:
- Unbranded 3-pole MCCB pulled from a working industrial environment. Inspected and in good used condition. Surface scuffing and minor terminal oxidation visible. Trip current unknown — see photos. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$30.00Was: $60.00 -
Unbranded Steel Resistance Heating Element Block 115V AC 10x10 in Handles
Unbranded
$95.00Was: $200.00Unbranded Steel Resistance Heating Element Block 115V AC 10x10 in HandlesThis is an unbranded octagonal steel resistance heating element block rated for 115V AC operation. The unit functions as a...46588- SKU:
- 46588
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 70.00 LBS
- Brand:
- Unbranded
- Model:
- N/A – Unbranded
- Type:
- Resistance Heating Element Block
- SKU:
- 46588
- Condition:
- Used – Inspected and Tested
- Voltage:
- 115V AC
- Power Source:
- AC Electric
- Dimensions:
- 10 x 10 x 2.625 in
- Shape:
- Octagonal
- Material:
- Steel
- Handles:
- Yes – 2 aluminum fold-down handles
- Wiring:
- Includes attached multi-conductor wiring harness
- Connector Type:
- Standard 2-prong AC power plug
- Form Factor:
- Benchtop / Portable
- Application:
- Industrial, Laboratory, Thermal Processing
- Seller Notes:
- Includes attached wiring harness with power plug and lead wires with terminals.
- Condition Notes:
- Unbranded steel resistance heating element block, 115V AC, tested and in working order. Surface shows oxidation and patina from prior use. Both aluminum handles intact. Wiring harness with AC plug and lead wires included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$95.00Was: $200.00 -
Unbranded CD DVD Disk Spin Coater Spinner Chamber 115V Motor 5.5" Bowl 4.75"
Unbranded
$78.00Was: $175.00Unbranded CD DVD Disk Spin Coater Spinner Chamber 115V Motor 5.5" Bowl 4.75" Plate This benchtop spin coater chamber was used in CD, DVD, and Blu-Ray disk manufacturing processes. The unit powers on...46973- SKU:
- 46973
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 15.00 LBS
- Brand:
- Unbranded
- Model:
- N/A – Unbranded
- Type:
- Spin Coater / Spinning Chuck Chamber
- SKU:
- 46973
- Power Requirements:
- 115V AC
- Bowl / Chamber Diameter:
- 5.5 inches
- Chamber Height (from top of plate):
- 2.25 inches
- Plate / Chuck Diameter:
- 4.75 inches
- Motor Control:
- ON/OFF toggle switch
- Application / Use Case:
- CD / DVD / Blu-Ray disk manufacturing process
- Form Factor:
- Benchtop
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit powers on and spins. Includes motor, clear bowl shield, and base plate.
- Condition Notes:
- This unbranded CD/DVD disk spin coater powers on and spins — tested and in working order. Base plate shows surface staining; motor housing has scuffing. Clear bowl intact. 115V plug, toggle switch included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$78.00Was: $175.00 -
Unbranded 11063 Transformer 365VA 200V Primary 500V 12.6CT Secondary Power
Unbranded
$95.00Was: $200.00Unbranded 11063 Transformer 365VA 200V Primary 500V 12.6CT Secondary PowerSingle-phase power transformer with 365VA capacity. Steps up 200V primary input to 500V secondary output with center-tap...47194- SKU:
- 47194
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 30.00 LBS
- Brand:
- Unbranded
- Model:
- 11063
- MPN:
- 11063
- Type:
- Power Transformer
- SKU:
- 47194
- Primary Voltage:
- 200V
- Secondary Voltage:
- 500V / 12.6CT (center-tap)
- Power Rating:
- 365 VA
- Phase:
- Single Phase
- Winding Configuration:
- Multi-tap secondary with terminal block
- Dimensions:
- 9 in. L x 5 in. W x 7 in. H
- Core Type:
- Laminated Iron Core
- Mounting:
- Chassis / Panel Mount (mounting feet)
- Termination:
- Multi-position screw terminal block
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working environment, inspected.
- Form Factor:
- Open Frame / Chassis Mount
- Condition Notes:
- Unbranded 11063 365VA transformer in good used condition. Pulled from a working environment. Core and winding intact. Mounting feet show surface rust; tape wrapping shows age. Terminal block present with leads.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$95.00Was: $200.00 -
Unbranded 11064 Toroidal Transformer 345VA 200/250/400/500V 115V RF Generator
Unbranded
$55.00Was: $100.00Unbranded 11064 Toroidal Transformer 345VA 200/250/400/500V 115V RF GeneratorThis is a single-phase toroidal power transformer rated at 345VA with multi-tap primary windings. It steps down from 200V,...47197- SKU:
- 47197
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 14.00 LBS
- Brand:
- Unbranded
- Model:
- 11064
- MPN:
- 11064
- Type:
- Toroidal Power Transformer
- SKU:
- 47197
- Power Rating:
- 345 VA
- Primary Voltage:
- 200V / 250V / 400V / 500V (multi-tap)
- Secondary Voltage:
- 115V
- Phase:
- Single Phase
- Winding Configuration:
- Multi-tap primary, single secondary
- Core Type:
- Toroidal
- Terminal Type:
- Screw terminal block with wire leads
- Form Factor:
- Open Frame / Chassis Mount
- Application:
- RF Generator replacement / industrial power
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Pulled from RF generator; wire leads and terminal block intact
- Compatible With:
- RF generators and industrial equipment requiring 345VA multi-tap transformer
- Condition Notes:
- Unbranded 11064 Toroidal Transformer 345VA, pulled from a working RF generator. Inspected and in good used condition. Wire leads and terminal block are intact. Normal wear. Contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Stainless Steel KF Flange Reducer Adapter DN16KF to DN40KF NW-16 NW-40 33mm
Unbranded
$12.00Was: $25.00Stainless Steel KF Flange Reducer Adapter DN16KF to DN40KF NW-16 NW-40 33mmStainless steel reducer adapter for connecting KF16 and KF40 vacuum flanges. Transitions from DN16KF small flange to DN40KF...49130- SKU:
- 49130
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.95 LBS
- Brand:
- Unbranded
- Model:
- DN16KF to DN40KF Flange Reducer
- Type:
- KF Flange Reducer Adapter
- SKU:
- 49130
- Flange Standard:
- ISO-KF (QF/NW)
- Small Flange Size:
- DN16KF / NW-16
- Large Flange Size:
- DN40KF / NW-40
- Small Flange OD:
- 30 mm
- Small Flange ID:
- 17 mm
- Large Flange OD:
- 55 mm
- Large Flange ID:
- 41 mm
- Tube Inner Diameter:
- 16 mm
- Overall Length:
- 33 mm (1.3 in)
- Material:
- Stainless Steel
- Compatible With:
- KF16 / KF40 vacuum systems, chambers, pumps
- Application:
- High vacuum, laboratory vacuum systems
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- Unknown
- Seller Notes:
- Flange adapter only; no centering ring or clamp included
- Condition Notes:
- Stainless steel DN16KF to DN40KF vacuum flange reducer, inspected and in good used condition. Pulled from a working vacuum system. Machined faces intact; minor surface marks from normal use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Aluminum Vacuum Fluid Chamber DN40KF NW-40 Flanges Coarse Filters 1/4 NPT Ports
Unbranded
$115.00Was: $225.00Aluminum Vacuum Fluid Chamber DN40KF NW-40 Flanges Coarse Filters 1/4 NPT PortsAluminum vacuum fluid chamber designed for use in vacuum systems. Features DN40KF flanges and three coarse mesh filter...49139- SKU:
- 49139
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 32.00 LBS
- Brand:
- Unbranded
- Model:
- DN40KF Aluminum Vacuum Fluid Chamber
- Type:
- Vacuum Fluid Chamber with Coarse Filters
- SKU:
- 49139
- Condition:
- As-Is / For Parts or Not Working
- Flange Type:
- DN40KF / NW-40
- Flange OD:
- 55 mm
- Flange ID:
- 41 mm
- Upper Port - Small OD:
- 1-7/8 inch diameter
- Upper Port - Large OD:
- 3-13/16 inch diameter
- Side Port Type:
- 1/4 inch NPT
- Chamber Dimensions:
- 285 mm L x 150 mm W x 170 mm D
- Filter Type:
- Coarse mesh (wire mesh panels)
- Number of Filter Bays:
- 3 (two side bays + center bay)
- Number of Upper Vacuum Ports:
- 5 (1 large center, 4 smaller flanged)
- Material:
- Aluminum
- Mounting:
- Floor-mount feet / bolt-down flanges
- Seller Notes:
- Sold as-is; includes chamber body, DN40KF flanges, coarse mesh filters, valve hardware, and sight glass tube on side port.
- Form Factor:
- Freestanding box with mounting feet
- Condition Notes:
- Aluminum vacuum fluid chamber with DN40KF NW-40 flanges sold as-is for parts. Chamber body intact; flanges, coarse mesh filters, valve hardware, and sight glass present. Heavy surface oxidation and industrial wear. Not tested.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$115.00Was: $225.00 -
Stainless Steel In-Line Filter Housing 50mm OD / 80mm ID Ports Tri-Clamp Vacuum
Unbranded
$75.00Was: $150.00Stainless Steel In-Line Filter Housing 50mm OD / 80mm ID Ports Tri-Clamp VacuumThis is an unbranded stainless steel in-line filter housing designed for use in vacuum lines, process fluid systems, and...49142- SKU:
- 49142
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- In-Line Filter Housing 50mm/80mm
- Type:
- In-Line Filter Housing
- SKU:
- 49142
- Material:
- Stainless Steel
- Upper Port OD:
- 50 mm
- Lower Port ID:
- 80 mm
- Filter Cavity Dimensions:
- 130 mm x 60 mm
- Connection Type:
- Tri-Clamp / Sanitary Flange
- Side Port Type:
- Threaded (NPT-style), approx. 6-8 mm
- Application:
- Vacuum line, process fluid, laboratory filtration
- Finish:
- Polished Stainless Steel
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Housing only — no filter element included.
- Condition Notes:
- Used stainless steel in-line filter housing. Inspected and in good condition — pulled from active service. Light surface scuffing and minor discoloration on body; port and flange surfaces intact. No filter element included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Aluminum In-Line Vacuum Filter Housing 30mm OD / 75mm ID Ports 110x45mm Cavity
Unbranded
$35.00Was: $70.00Aluminum In-Line Vacuum Filter Housing 30mm OD / 75mm ID Ports 110x45mm CavityIn-line vacuum filter housing designed to trap particulates and protect vacuum pump systems. Aluminum construction with...49143- SKU:
- 49143
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- In-Line Vacuum Filter Housing
- Type:
- In-Line Vacuum Filter Housing
- Material:
- Aluminum
- Upper Port OD:
- 30 mm
- Lower Port ID:
- 75 mm
- Filter Cavity Dimensions:
- 110 mm x 45 mm
- Connection Type:
- KF / NW Flange (large base), compression-fit upper port
- Application / Use Case:
- Vacuum line filtration, foreline trap, pump protection
- Compatible With:
- Vacuum pumps, vacuum chambers, foreline systems
- Condition:
- Used – Pulled from Working Environment
- SKU:
- 49143
- Seller Notes:
- Unit only — no filter media included. Pulled from working service.
- Condition Notes:
- Aluminum In-Line Vacuum Filter Housing pulled from a working vacuum system. Good used condition — body is sound, ports intact. Visible corrosion patches and label residue on lower body exterior. No cracks or deformation.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
45 Degree Aluminum Optics Block 1" Port 0.25" Mounting Holes Mirror Mount Lab
Unbranded
$65.00Was: $125.0045 Degree Aluminum Optics Block 1" Port 0.25" Mounting Holes Mirror Mount LabThis is an unbranded 45-degree anodized aluminum optics block used to redirect or steer a laser or optical beam at a...49276- SKU:
- 49276
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 45 Degree Optics Block
- Type:
- Optical Mirror Mount Block
- SKU:
- 49276
- Condition:
- Used – Pulled from Working Environment
- Material:
- Aluminum (anodized black)
- Beam Angle:
- 45 Degrees
- Optical Port Diameter:
- 1 inch (25.4 mm)
- Mounting Hole Diameter:
- 0.25 inch
- Mounting Hole Spacing:
- 4.25 inches center to center
- Mirror:
- Rotatable and removable; secured by set screws
- Number of Set Screws:
- 2
- Application:
- Laser / optical beam steering, breadboard lab use
- Form Factor:
- Benchtop / Breadboard Mount
- Seller Notes:
- Includes mirror element. Unit only — no additional accessories.
- Condition Notes:
- This 45-degree aluminum optics block is in good used condition, pulled from a working optical lab environment. Shows light surface scuffing on the rear face. Optical port clear; mirror present, rotates, and is retained by set screws.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Waterproof Rolling Hard Case 33x21x11.5 7-Latch Foam Insert Missing Wheel AS-IS
Unbranded
$110.00Was: $225.00Waterproof Rolling Hard Case 33x21x11.5 7-Latch Foam Insert Missing Wheel AS-ISThis is a large, unbranded waterproof hard-shell rolling travel and equipment case in the style of professional...35977- SKU:
- 35977
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 50.00 LBS
- Brand:
- Unbranded
- Model:
- N/A
- Type:
- Waterproof Rolling Hard Case
- SKU:
- 35977
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold AS-IS — missing one roller wheel. Includes two foam inserts (top & bottom).
- Exterior Length:
- 33 in
- Exterior Width:
- 21 in
- Exterior Height:
- 11.5 in
- Interior Length:
- 28.75 in
- Interior Width:
- 18 in
- Interior Depth:
- 10 in
- Foam Depth (Top & Bottom):
- 2 in each
- Number of Latches:
- 7
- Pressure Relief Valve:
- Yes
- Foam Inserts Included:
- Yes — 2 (top and bottom, 2" depth each)
- Wheel/Rolling System:
- Rolling — missing one wheel (sold AS-IS)
- Color:
- Black
- Shell Material:
- Hard plastic (polypropylene-style)
- Water Resistance:
- Waterproof
- Handle Type:
- Retractable telescoping pull handle + side carry handle
- Compatible With:
- General equipment transport, audio/visual, tools, field gear
- Country/Region of Manufacture:
- Unknown
- Condition Notes:
- Waterproof rolling hard case sold AS-IS — missing one roller wheel. Shell intact, all 7 latches engage, foam inserts present. Retractable handle functional. For parts/repair or discount use. Not guaranteed functional as a rolling case.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$110.00Was: $225.00 -
Vacuum Solenoid Coil 264 Gauss/Amp BNC Connector 38" Long Magnetic Field Coil
Unbranded
$175.00Was: $350.00Vacuum Solenoid Coil 264 Gauss/Amp BNC Connector 38" Long Magnetic Field CoilVacuum solenoid coil designed to generate axial magnetic fields within vacuum chamber environments. Rated at 264 Gauss per...41532- SKU:
- 41532
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Unbranded
- Model:
- 264 Gauss/Amp Vacuum Solenoid Coil
- Type:
- Vacuum Solenoid / Magnetic Field Coil
- SKU:
- 41532
- Condition:
- As-Is / For Parts or Not Working
- Overall Length:
- 38 inches
- Magnetic Field Rating:
- 264 Gauss per Amp
- Connector Type:
- BNC (female)
- Cable Color:
- Blue coaxial cable
- Coil Housing Material:
- Brass
- Coil Housing Shape:
- Toroidal / cylindrical with open center bore
- End Plate:
- Circular flanged plate with bolt pattern
- Support Structure:
- Stainless steel threaded rods
- Application:
- Vacuum chamber magnetic field generation
- Mounting:
- Flanged end plate with bolt circle
- Seller Notes:
- Sold as-is for parts or repair. BNC connector output. Includes small PCB sensor near coil housing.
- Compatible With:
- Vacuum chamber systems requiring axial magnetic field
- Condition Notes:
- Vacuum solenoid coil 264 Gauss/Amp, 38" long, sold as-is for parts or repair. Assembly appears intact — brass coil, stainless rods, flanged plate, BNC cable lead, and small PCB sensor present. Not tested; no functionality guaranteed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
Pneumatic Linear Slide Cylinder Aluminum Push Block 20mm Stroke 16mm Rod Dual
Unbranded
$28.00Was: $60.00Pneumatic Linear Slide Cylinder Aluminum Push Block 20mm Stroke 16mm Rod Dual GuideThis is an unbranded pneumatic linear slide cylinder assembly with an aluminum push block, dual external guide rods,...48738- SKU:
- 48738
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Unbranded
- Model:
- Pneumatic Linear Slide Cylinder
- Type:
- Guided Pneumatic Linear Cylinder / Slide Unit
- SKU:
- 48738
- Stroke Length:
- 20mm
- Rod Diameter:
- 16mm
- Push Block Dimensions:
- 95mm x 35mm x 15mm
- Body Dimensions:
- 115mm x 98mm x 38mm
- Push Block Material:
- Aluminum
- Body Material:
- Aluminum
- Guide Type:
- Dual round guide rods
- Fitting Type:
- Push-in pneumatic fittings (blue)
- Actuator Type:
- Double-acting pneumatic linear actuator
- Form Factor:
- Compact block-body with external guide rods
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only — no additional accessories included
- Condition Notes:
- Pneumatic linear slide cylinder with push block pulled from a working environment. Inspected and in good used condition. Aluminum body shows typical industrial wear. Fittings and guide rods intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00