null

Unbranded

Unbranded

  • Dynapower 250W AT power supply — angled rear-left view showing IEC inlet, voltage selector, fan grille, and outgoing wiring harness Dynapower 250W AT power supply — rear panel view showing dual IEC connectors, rocker voltage selector switch, and fan grille

    AT Power Supply 250W 12-Pin Vintage Desktop 386 486 Pentium w/ Power Switch

    Unbranded

    $40.00
    Was: $95.00
    AT Power Supply 250W 12-Pin Vintage Desktop 386 486 Pentium w/ Power Switch A Dynapower 250W AT-form-factor power supply for legacy desktop computers. Delivers 250 watts via dual 12-pin AT...
    52783
    SKU:
    52783
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    8.00 LBS
    Brand:
    Dynapower
    Model:
    AT Power Supply 250W
    MPN:
    94093615
    SKU:
    52783
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Includes power switch cable for front-panel routing
    Form Factor:
    AT Desktop
    Power Output:
    250W
    Connector Type:
    12-Pin Two-Cable AT Motherboard Connector
    Compatible With 1:
    386, 486, and early Pentium AT motherboards
    Compatible With 2:
    Standard AT desktop tower and mini-tower cases
    Power Requirements:
    115/230V AC, 50/60Hz (voltage selector switch)
    Cooling:
    Internal fan — rear exhaust
    Output Connectors:
    Dual 6-pin AT motherboard plugs, Molex 4-pin drive
    Country of Manufacture:
    Unknown
    Condition Notes:
    This Dynapower 250W AT power supply has been tested at our facility and is in good working order. Chassis shows typical cosmetic wear. Includes dual AT motherboard connectors and front-panel power switch cable. Please contact us with any questions.
    $40.00
    Was: $95.00
  • Stainless steel bottom knife ring slitter 5.906 OD x 4.0005 ID — top-angle view showing outer ring and rubber seal Stainless steel bottom knife ring slitter — elevated angle view showing inner bore and ring profile

    Stainless Steel Bottom Knife Ring Slitter 5.906" OD x 4.0005" ID Slitting Blade

    Unbranded

    $150.00
    Was: $300.00
    Stainless Steel Bottom Knife Ring Slitter 5.906" OD x 4.0005" ID Slitting Blade Bottom knife ring slitter used in converting and slitting machinery. Designed to cut materials in line with companion...
    51767
    SKU:
    51767
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Unbranded
    Type:
    Bottom Knife Ring Slitter
    SKU:
    51767
    Outer Diameter (OD):
    5.906 in
    Inner Diameter (ID):
    4.0005 in
    Material:
    Stainless Steel
    Application:
    Slitting, Converting, Industrial Cutting
    Compatible Materials:
    Paper, Plastic Film, Foil, Flexible Packaging
    Condition:
    Used – Inspected
    Country/Region of Manufacture:
    Unknown
    Condition Notes:
    Used Stainless Steel Bottom Knife Ring Slitter 5.906" OD x 4.0005" ID. Good condition, typical handling marks. Rubber seal intact, cutting edge undamaged. Ready for use.
    $150.00
    Was: $300.00
  • 200ft gray 5-pin data extension cable wound on orange spool — top view with carry handle 200ft gray 5-pin extension cable on orange spool — side profile showing full cable wrap

    200ft 5-Pin Male Female Extension Data Cable on Orange Spool 60M Gray

    Unbranded

    $55.00
    Was: $100.00
    200ft 5-Pin Male Female Extension Data Cable on Orange Spool 60M Gray5-pin circular connector extension cable rated for industrial and telecom data applications. This male-to-female configuration...
    50069
    SKU:
    50069
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    11.00 LBS
    Brand:
    Unbranded
    Model:
    5-Pin Male/Female Extension Data Cable
    Type:
    Data Extension Cable
    Connector Type:
    5-Pin Circular (Male / Female)
    Cable Length:
    200 ft (approx. 60 m)
    Cable Color:
    Gray
    Includes:
    Orange cable storage spool with handle
    Gender:
    Male to Female
    Number of Pins:
    5
    SKU:
    50069
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes orange storage spool; 5-pin male and female connectors on each end
    Condition Notes:
    200ft 5-pin male/female data cable inspected and in good used condition. Pulled from a working environment. Gray jacket shows light normal wear; connectors intact. Orange spool included.
    $55.00
    Was: $100.00
  • CEC 01000-90001 GPIB IEEE-488 1 meter cable coiled showing both straight 24-pin Micro-Ribbon connectors and cable label Close-up of CEC cable label reading 'CEC 1 METER 01000-90001' affixed to gray cable jacket

    GPIB IEEE-488 Cable 1m CEC 01000-90001 HP 10833A Style Straight Connector HPIB

    Unbranded

    $28.00
    Was: $60.00
    GPIB IEEE-488 Cable 1m CEC 01000-90001 HP 10833A Style Straight Connector HPIBIEEE-488 instrument bus cable used to connect GPIB-compatible test equipment, data acquisition systems, and controllers...
    49685
    SKU:
    49685
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    CEC
    Model:
    01000-90001
    MPN:
    01000-90001
    Type:
    GPIB / IEEE-488 Instrument Bus Cable
    SKU:
    49685
    Compatible With:
    HP 10833A style GPIB instruments and controllers
    Connector Type:
    24-pin Micro-Ribbon (Amphenol IEEE-488), Straight
    Cable Length:
    1 Meter (3.3 ft)
    Interface:
    GPIB / IEEE-488 / HPIB
    Number of Connectors:
    2 (one each end, straight)
    Cable Standard:
    IEEE-488 / IEC-625
    Wire Type:
    AWM 2464
    Temperature Rating:
    75°C
    Cable Certifications:
    UL (E123143), CSA, Type CL2
    Country/Region of Manufacture:
    Taiwan
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    CEC-labeled 1m GPIB cable, HP 10833A style, inspected and in good condition
    Condition Notes:
    CEC 01000-90001 GPIB IEEE-488 1m cable inspected and in good used condition. Jacket clean and intact, both connectors in good shape, no bent pins noted. Pulled from a working lab environment.
    $28.00
    Was: $60.00
  • Unbranded CD DVD spin coater spinner chamber front view showing clear bowl, motor, BASE-labeled switch box, and white base plate Unbranded spin coater spinner rear/side view showing motor housing, power cord, and clear cylindrical bowl on base plate

    Unbranded CD DVD Disk Spin Coater Spinner Chamber 115V Motor 5.5" Bowl 4.75"

    Unbranded

    $78.00
    Was: $175.00
    Unbranded CD DVD Disk Spin Coater Spinner Chamber 115V Motor 5.5" Bowl 4.75" Plate This benchtop spin coater chamber was used in CD, DVD, and Blu-Ray disk manufacturing processes. The unit powers on...
    46973
    SKU:
    46973
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    15.00 LBS
    Brand:
    Unbranded
    Model:
    N/A – Unbranded
    Type:
    Spin Coater / Spinning Chuck Chamber
    SKU:
    46973
    Power Requirements:
    115V AC
    Bowl / Chamber Diameter:
    5.5 inches
    Chamber Height (from top of plate):
    2.25 inches
    Plate / Chuck Diameter:
    4.75 inches
    Motor Control:
    ON/OFF toggle switch
    Application / Use Case:
    CD / DVD / Blu-Ray disk manufacturing process
    Form Factor:
    Benchtop
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Unit powers on and spins. Includes motor, clear bowl shield, and base plate.
    Review Status:
    Auto-Approved (needs review) 2026-07-04
    Condition Notes:
    This unbranded CD/DVD disk spin coater powers on and spins — tested and in working order. Base plate shows surface staining; motor housing has scuffing. Clear bowl intact. 115V plug, toggle switch included.
    $78.00
    Was: $175.00