Description
AT Power Supply 250W 12-Pin Vintage Desktop 386 486 Pentium w/ Power Switch
A Dynapower 250W AT-form-factor power supply for legacy desktop computers. Delivers 250 watts via dual 12-pin AT motherboard connectors and standard Molex drive connectors.
Specifications & What's Included
- Brand: Dynapower | Model: AT Power Supply 250W | MPN: 94093615
- Output: 250W via dual 6-pin AT motherboard plugs and Molex 4-pin connectors
- Input: 115/230V AC, 50/60Hz with voltage selector switch
- Cooling: Internal fan with rear exhaust
- Includes front-panel power switch cable
- Tested and verified working
Applications
AT power supplies powered desktop computers through the 1980s and early 1990s. This unit is compatible with 386, 486, and early Pentium AT motherboards, and fits standard AT tower and mini-tower cases from that era. The 250W output was typical for systems of that generation.
Condition: Used
This Dynapower 250W AT desktop power supply has been tested at our facility and is in good working order. Units show typical cosmetic wear consistent with pulls from vintage desktop computers — light scuffing and minor surface marks on the steel chassis, which is expected for this era of hardware. The wiring harness is intact and includes the dual 6-pin AT motherboard connectors (P8/P9) and Molex 4-pin peripheral drive connectors. A front-panel power switch cable with toggle switch assembly is also included. Please note that we have multiple units in stock; the specific unit you receive may vary slightly in cosmetic appearance but all have been inspected to the same standard. Please view our photo set and contact us if you have any questions.
This Dynapower 250W AT desktop power supply has been tested at our facility and is in good working order. Units show typical cosmetic wear consistent with pulls from vintage desktop computers — light scuffing and minor surface marks on the steel chassis, which is expected for this era of hardware. The wiring harness is intact and includes the dual 6-pin AT motherboard connectors (P8/P9) and Molex 4-pin peripheral drive connectors. A front-panel power switch cable with toggle switch assembly is also included. Please note that we have multiple units in stock; the specific unit you receive may vary slightly in cosmetic appearance but all have been inspected to the same standard. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Dynapower |
Model: |
AT Power Supply 250W |
MPN: |
94093615 |
SKU: |
52783 |
Condition: |
Used – Inspected and Tested |
Seller Notes: |
Includes power switch cable for front-panel routing |
Form Factor: |
AT Desktop |
Power Output: |
250W |
Connector Type: |
12-Pin Two-Cable AT Motherboard Connector |
Compatible With 1: |
386, 486, and early Pentium AT motherboards |
Compatible With 2: |
Standard AT desktop tower and mini-tower cases |
Power Requirements: |
115/230V AC, 50/60Hz (voltage selector switch) |
Cooling: |
Internal fan — rear exhaust |
Output Connectors: |
Dual 6-pin AT motherboard plugs, Molex 4-pin drive |
Country of Manufacture: |
Unknown |
Condition Notes: |
This Dynapower 250W AT power supply has been tested at our facility and is in good working order. Chassis shows typical cosmetic wear. Includes dual AT motherboard connectors and front-panel power switch cable. Please contact us with any questions. |
