Description
Name Brand 230 to 250 Watt AT Power Supply for 386 486 Pentium Legacy PC
AT form factor switching power supply rated for 230 to 250W output. Provides regulated power to legacy 386, 486, and early Pentium systems via dual P8/P9 motherboard connectors and Molex drive connectors.
Specifications & What's Included
- Model: Various (Models shown in photos are similar)
- Power Rating: 230 to 250W; Input: 120V/6A or 240V/3.5A, 50/60Hz
- Outputs: +5V @ 24A, +12V @ 10A, -5V @ 0.5A, -12V @ 0.5A
- Connectors: AT motherboard (P8/P9), Molex 4-pin drive
- Cooling: Internal rear-mounted fan
- Quantity: One unit per order
Applications
This AT supply was standard equipment in 386, 486, and early Pentium-based systems from the late 1980s through mid-1990s. Compatible with motherboards using the dual P8/P9 connector standard and AT form factor cases. Suitable for system restoration, repair, or replacement in legacy builds requiring original-specification components.
Please note: We may have multiple units of this item in stock. The unit you receive may vary slightly from the one shown in the photos. All units are functionally equivalent and inspected to the same standard.
Name Brand 230 to 250 Watt AT Switching Power Supply for Legacy 386, 486 & Pentium Motherboards. This unit was professionally extracted from working legacy desktop computers and has been tested and confirmed to be in full working order. The metal housing displays light surface scuffing and age-appropriate patina consistent with vintage computer equipment, but the unit remains structurally intact with all wiring harnesses in good condition. Multiple units are available in stock; the specific unit you receive will be selected from inventory and may vary slightly in cosmetic appearance from the photographed example. Please review our complete photo set or contact us with any questions.
Warranty Information
Additional Information
Brand: |
Various Name Brand |
Model: |
Various |
MPN: |
Various |
SKU: |
14091 |
Condition: |
Used – Inspected and Tested |
Seller Notes: |
One power supply per order; unit selected from available stock. |
Form Factor: |
AT |
Power Rating: |
230 to 250W |
Power Requirements: |
120V/6A or 240V/3.5A, 50/60Hz |
Output Voltages: |
+5V @ 24A, +12V @ 10A, -5V @ 0.5A, -12V @ 0.5A |
Compatible With 1: |
386 motherboards, AT form factor cases |
Compatible With 2: |
486 motherboards, AT form factor cases |
Compatible With 3: |
Pentium motherboards, AT form factor cases |
Connector Type: |
AT motherboard connector (P8/P9), Molex 4-pin drive |
Cooling: |
Internal fan (rear-mounted) |
Country of Manufacture: |
Taiwan |
Condition Notes: |
Tested working. Legacy 250W AT power supply for 386/486/Pentium boards. Light cosmetic wear, patina on housing. Wiring harnesses intact. Multiple units available. |
