Unbranded
-
Unbranded Generic Round Ultrasonic Tank w/ 8-Pin Cable - No Power Supply
Unbranded
$34.00Was: $95.00Unbranded Generic Round Ultrasonic Tank w/ 8-Pin Cable - No Power Supply - As Is I.D. Width 7 Inches x Depth 8 Inches Condition: UsedThis used ultrasonic cleaner has been inspected and...34028- SKU:
- 34028
- Weight:
- 17.00 LBS
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$34.00Was: $95.00 -
Stainless Steel Tick Mark Flange OD 8.75" ID 5.87" 0.071" Thick Wafer Ring
Unbranded
$75.00Was: $150.00Stainless Steel Tick Mark Flange OD 8.75" ID 5.87" 0.071" Thick Wafer RingThis is a precision machined stainless steel tick mark flange ring measuring 8.75" outside diameter, 5.87" inside diameter,...32596- SKU:
- 32596
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Unbranded
- Model:
- Tick Mark Flange 8.75" OD
- Application:
- Semiconductor wafer handling, vacuum chuck tooling
- Condition:
- Used – Inspected and in Good Condition
- SKU:
- 32596
- Seller Notes:
- Sold as shown. No additional accessories included.
- Condition Notes:
- Stainless steel tick mark flange OD 8.75" ID 5.87" 0.071" thick. Inspected and in good condition. Clips and locking assemblies intact. Light surface oxidation typical of age. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Lot of 6 Go/No-Go Plug Gauges 3.5975 3.08 2.7 0.51 3.6225 3.6100mm Thread
Unbranded
$40.00Was: $80.00Lot of 6 Go/No-Go Plug Gauges 3.5975 3.08 2.7 0.51 3.6225 3.6100mm ThreadThis is a lot of six precision go/no-go plug gauges measured in millimeters, including four double-ended thread and plug...32535- SKU:
- 32535
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- Go/No-Go Plug Gauge Set
- Type:
- Go/No-Go Plug Gauge Set
- SKU:
- 32535
- Condition:
- Used – Inspected and Tested
- Quantity:
- 6 pieces
- Gauge Sizes (mm):
- 3.5975, 3.08, 2.7, 0.51, 3.6225, 3.6100
- Unit of Measurement:
- Millimeter (mm)
- Thread/Plug Gauges (Qty 4):
- 3.5975+0.025, 3.08+0.24, 2.7+0.1, 0.51+0.17 mm
- Straight Plug Gauges (Qty 2):
- 3.6225 mm, 3.6100 mm
- Gauge Style:
- Double-ended (Go/No-Go)
- Handle Color Code:
- Green = Go end; Red = No-Go end; Gold = body
- Storage:
- Included plastic storage case
- Application:
- Precision bore and thread inspection
- Seller Notes:
- Lot of 6 gauges in original storage case; inspected and in good working condition.
- Condition Notes:
- Lot of 6 go/no-go plug gauges inspected and in good working condition. Four thread/plug gauges and two straight plugs; all pins appear straight. Storage case included. Normal shop wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $80.00 -
Unbranded Stainless Steel Weighted Baseplate Stand w/ Adjustable Arm Assembly
Unbranded
$65.00Was: $125.00Unbranded Stainless Steel Weighted Baseplate Stand w/ Adjustable Arm AssemblyThis is a precision-machined stainless steel weighted baseplate with an articulating two-arm assembly. The unit consists...32423- SKU:
- 32423
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Unbranded
- Model:
- N/A
- Type:
- Weighted Baseplate Stand with Adjustable Arm Assembly
- SKU:
- 32423
- Material:
- Stainless Steel / Machined Aluminum
- Base Shape:
- Round Disc
- Base Features:
- 3 Mounting / Bolt-Down Holes
- Arm Configuration:
- Two-Arm Articulating Assembly on Vertical Post
- End Fittings:
- Knurled Cylindrical Fittings with O-Ring Seal
- Arm End Detail:
- One knurled end cap, one open-bore cylindrical end
- Retention Hardware:
- Cotter Pin / Spring Clip visible on underside
- Construction:
- Precision Machined
- Form Factor:
- Freestanding / Bench-Top
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes baseplate, vertical post, and two-arm assembly with end fittings.
- Condition Notes:
- Stainless steel weighted baseplate with adjustable arm assembly. Inspected and in good used condition — pulled from working service. Light handling marks; no damage or corrosion. All components present and intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Unbranded 1/2" NPT Flash Heater Cylinder 38cm Long 9cm Dia Thermocouple
Unbranded
$65.00Was: $125.00Unbranded 1/2" NPT Flash Heater Cylinder 38cm Long 9cm Dia ThermocoupleThis flash heater cylinder is an inline tube heater designed for rapid heating applications in industrial and telecom systems...32195- SKU:
- 32195
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 10.00 LBS
- Brand:
- Unbranded
- Model:
- Flash Heater 38cm x 9cm 1/2" NPT
- Type:
- Flash Heater / Inline Tube Heater
- Inlet Connection:
- 1/2" NPT
- Outlet Connection:
- 1/2" NPT
- Cylinder Length:
- 38 cm
- Cylinder Diameter:
- 9 cm
- Housing Material:
- Red Anodized Aluminum
- Temperature Sensor:
- Thermocouple (Type K yellow connector)
- Mounting:
- Bracket-mount feet (fixed to cylinder ends)
- Condition:
- Used – Inspected
- SKU:
- 32195
- Seller Notes:
- Includes attached thermocouple connector and power lead wires
- Condition Notes:
- This unbranded 1/2" NPT flash heater cylinder has been inspected and is in good condition. Body shows light scuffing. NPT brass port threads appear clean. Thermocouple connector and power wires intact. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Unbranded Yellow Plastic Flow Transmitter PO and R Adjustment Industrial Sensor
Unbranded
$25.00Was: $50.00Unbranded Yellow Plastic Flow Transmitter PO and R Adjustment Industrial SensorThis is an unbranded compact yellow plastic Flow Transmitter designed for industrial process flow measurement and...31678- SKU:
- 31678
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- Flow Transmitter
- Type:
- Flow Transmitter
- SKU:
- 31678
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- One mounting tab on bottom is broken. Unit only — no accessories included.
- Housing Color:
- Yellow
- Housing Material:
- Plastic
- Adjustments:
- PO (+ / -) and R (+ / -) adjustment inputs
- Signal Type:
- INPUT (labeled on top face)
- Connector Type:
- Multi-pin block connector (rear-mounted)
- Display:
- Rectangular window / indicator panel on front face
- Application:
- Industrial process flow measurement and control
- Form Factor:
- Compact inline/panel-mount module
- Condition Notes:
- Used yellow plastic Flow Transmitter pulled from a working environment. Good overall condition. Note: one mounting tab on the bottom housing is broken off. Front, display, and connector are intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Stepper Motor w/ Gear Assembly BLG-4320-BA Copier Robotics Experiment Parts
Unbranded
$20.00Was: $40.00Stepper Motor w/ Gear Assembly BLG-4320-BA Copier Robotics Experiment PartsUsed stepper motor with integrated gear train assembly, pulled from working copier equipment. Includes motor housing,...31582- SKU:
- 31582
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Unbranded
- Model:
- BLG-4320-BA
- MPN:
- BLG-4320-BA
- Type:
- Stepper Motor with Gear Assembly
- SKU:
- 31582
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes motor, gear train assembly, and multi-wire harness with two connectors
- Application:
- Copier, Robotics, DIY Experiments, Parts
- Drive Type:
- Stepper Motor
- Gear Type:
- Plastic and Metal Gear Train
- Connector Type:
- Two Multi-Pin Wire Harness Connectors
- Number of Wires:
- Multi-wire harness (approx. 14-16 wires)
- Housing Material:
- Steel / Aluminum
- Compatible With:
- Copier machines, robotics platforms, DIY electronics projects
- Condition Notes:
- Stepper motor BLG-4320-BA pulled from a working environment, inspected and in good used condition. Motor housing, gear assembly, and wiring harness with two connectors all intact. Normal service wear. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $40.00 -
Unbranded Steel Linear Carriage Mechanism Unipolar Stepper Motor M5248P PWB-G
Unbranded
$18.00Was: $40.00Unbranded Steel Linear Carriage Mechanism Unipolar Stepper Motor M5248P PWB-G 1053This is a steel and aluminum linear carriage mechanism incorporating a unipolar stepper motor, a cable/pulley drive...31580- SKU:
- 31580
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Unbranded
- Model:
- M5248P
- MPN:
- 1053-0107
- Type:
- Linear Carriage Mechanism with Stepper Motor
- SKU:
- 31580
- Motor Type:
- Unipolar Stepper Motor
- Driver IC:
- M5248P
- PCB Part Number:
- PWB-G 1053-0107
- Drive System:
- Steel cable / belt over pulley with tension spring
- Construction:
- Aluminum and steel rail carriage
- Connector Type:
- Multi-pin JST-style wire harness connector
- Application:
- Printer carriage, robotics, linear positioning
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes stepper motor, M5248P driver board (PWB-G 1053-0107), and wire harness
- Condition Notes:
- Unbranded steel linear carriage mechanism with unipolar stepper motor and M5248P driver. Inspected and in good used condition; pulled from a working environment. Rail, cable, spring, and PCB (PWB-G 1053-0107) all present and intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
M31461 Hard Disk Drive HDD Fault Tester +12V +5V Voice Coil Head Select
Unbranded
$65.00Was: $125.00M31461 Hard Disk Drive HDD Fault Tester +12V +5V Voice Coil Head Select IndicatorThe M31461 is a benchtop hard disk drive fault test fixture designed to monitor and indicate fault conditions across...31261- SKU:
- 31261
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Unbranded
- Model:
- M31461
- MPN:
- M31461
- Type:
- Hard Disk Drive Fault Tester / HDD Test Fixture
- SKU:
- 31261
- Condition:
- Used – Pulled from Working Environment
- Form Factor:
- Benchtop
- Enclosure Color:
- Blue and Gray Metal
- Fault Indicators:
- +12VHDA Short, +5VHDA Short, Voice Coil Short, Voice Coil Open
- Additional Indicators:
- Voice-Coil Short to Ground, Head Select 0, Head Select 1, Write Unsafe
- Display Type:
- LED Fault Indicator Lights (multiple)
- Controls:
- UP/DOWN Toggle Switch, Power Rocker Switch
- Interface / Connector:
- Ribbon Cable Connector (flat flex)
- Seller Notes:
- Includes attached ribbon cable and power cord as shown in photos.
- Application:
- Hard Disk Drive Testing, HDD Fault Diagnosis, Voice Coil & Head Select Verification
- Condition Notes:
- This M31461 HDD Fault Tester has been inspected and is in good used condition, pulled from a working environment. Enclosure shows light surface wear consistent with bench use. LED indicators, toggle switch, and connectors appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
X-Axis Linear Slide Work Table Dual Pneumatic Cylinders Timer 133cm 29.5cm
Unbranded
$600.00Was: $1,200.00X-Axis Linear Slide Work Table Dual Pneumatic Cylinders Timer 133cm 29.5cm StrokeThis is an unbranded X-axis linear slide work table driven by two pneumatic cylinders and controlled by a standalone...31253- SKU:
- 31253
- Availability:
- This item requires freight shipping due to its size and weight — please contact us for a freight quote before ordering.
- Weight:
- 151.00 LBS
- Brand:
- Unbranded
- Model:
- X-Axis Linear Slide Work Table
- Type:
- Pneumatic X-Axis Linear Slide Work Table
- SKU:
- 31253
- Condition:
- Used – Inspected, Not Bench-Tested
- Total Length:
- 133 cm
- Total Width:
- 50 cm
- Moving Table Width:
- 18 cm
- Stroke Length:
- 29.5 cm
- Total Height:
- 16 cm
- Number of Cylinders:
- 2
- Actuation Type:
- Pneumatic
- Motion Axis:
- X-Axis
- Power Requirements:
- 20A, 250V (twist-lock plug)
- Connector Type:
- DB25 (25-pin D-Sub); Centronics 36-pin; push-to-connect pneumatic fittings
- Pneumatic Ports:
- 4 push-to-connect ports labeled A1, B1, A2, B2
- Timer Channels:
- 2 (T1, T2 dial timers)
- Valve Channels:
- 2 (V1, V2 indicators on controller)
- Controller Included:
- Yes – standalone control box with power switch, LED indicators, dual timers
- Pneumatic Tubing Included:
- Yes – black tubing with push-to-connect fittings
- Power Cord Included:
- Yes – with NEMA twist-lock 20A 250V plug
- Seller Notes:
- Includes control box, pneumatic tubing, and power cord with 20A 250V twist-lock plug. Freight shipping required.
- Form Factor:
- Freestanding / Benchtop Industrial
- Frame Material:
- Aluminum extrusion with aluminum table surface
- Condition Notes:
- This unbranded X-axis pneumatic linear slide work table has been inspected and appears in fair used condition. Not bench-tested at our facility. Surface staining visible on work table top.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
Custom Stainless Steel Chemical Transport Cart on Casters w/ Pump Valves Tank
Unbranded
$2,000.00Was: $4,000.00Custom Stainless Steel Chemical Transport Cart on Casters w/ Pump Valves TankThis is a custom-fabricated stainless steel chemical transport cart designed for the mobile storage and dispensing of...30935- SKU:
- 30935
- Availability:
- Usually ships within 1-2 business days of payment.
- Weight:
- 151.00 LBS
- Brand:
- Unbranded
- Model:
- Custom
- Type:
- Chemical Transport Cart
- SKU:
- 30935
- Condition:
- Used – Inspected and Pulled from Working Environment
- Frame Material:
- Stainless Steel
- Tank Material:
- Stainless Steel
- Mobility:
- Casters (4-wheel)
- Chemical Compatibility:
- Xylene (NFPA labeled); general solvent service
- Pump:
- Integrated pump (brand/model not legible in photos)
- Valve Type:
- Stainless steel ball valves and needle valves
- Coupling Type:
- Quick-connect couplings (VENT and CHEM 2 labeled)
- Level Sensing:
- LOW and HIGH level indicators with wired sensors
- Pressure Gauge:
- Inline pressure gauge included
- Fittings:
- Stainless steel compression fittings and manifold
- Hose/Line Type:
- Braided stainless flex hose and tubing
- Hazard Label:
- NFPA diamond labels – Xylene (Health/Flammability/Reactivity)
- Application:
- Semiconductor, clean room, lab solvent/chemical dispensing
- Form Factor:
- Mobile cart
- Seller Notes:
- Sold as shown; includes cart frame, tank, pump, valves, hoses, and couplings.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Custom stainless steel chemical transport cart on casters. Inspected and in good condition. Frame, tank, pump, valves, couplings, and sensor wiring all appear intact. Normal wear from prior use. Contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$2,000.00Was: $4,000.00 -
Custom Vacuum Chuck Assembly Steel Block Linear Bearing Pneumatic 23x21cm Al
Unbranded
$200.00Was: $400.00Custom Vacuum Chuck Assembly Steel Block Linear Bearing Pneumatic 23x21cm Al BaseThis is a custom-built vacuum chuck assembly designed for precision workholding using pneumatic vacuum actuation. The...30901- SKU:
- 30901
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Vacuum Chuck Assembly
- Type:
- Vacuum Chuck Assembly
- SKU:
- 30901
- Condition:
- Used – Inspected
- Base Plate Dimensions:
- 23 x 21 cm
- Steel Block Insert Size:
- 2.5 x 9.2 cm (two pieces)
- Actuator / Clamp Type:
- Toggle clamp / lever arm
- Linear Bearing:
- Yes
- Pneumatic Connections:
- Yes – spanner switches for pneumatic lines
- Micrometer Screws:
- Yes – one dial missing
- Base Material:
- Aluminum
- Chuck / Block Material:
- Steel (flat ground)
- Application:
- Vacuum workholding, semiconductor, precision machining
- Form Factor:
- Benchtop
- Seller Notes:
- One micrometer dial is missing. Pneumatic lines and linear bearing present.
- Condition Notes:
- Custom vacuum chuck assembly inspected and in good used condition. Linear bearing, pneumatic switches, and toggle clamp present. One micrometer dial is missing. Light surface wear on aluminum base.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$200.00Was: $400.00 -
Chemical Resistant Container 13x27.5x18.5 Clean Room Tank w/ Pressure Regulator
Unbranded
$150.00Was: $300.00Chemical Resistant Container 13x27.5x18.5 Clean Room Tank w/ Pressure RegulatorThis is an unbranded chemical resistant enclosure measuring 13 in x 27.5 in x 18.5 in, built for use in clean room and...30655- SKU:
- 30655
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 40.00 LBS
- Brand:
- Unbranded
- Model:
- Chemical Resistant Container 13x27.5x18.5
- Type:
- Chemical Resistant Container / Clean Room Tank
- SKU:
- 30655
- Exterior Dimensions:
- 13 in x 27.5 in x 18.5 in
- Material:
- Chemical Resistant (polypropylene/coated steel body)
- Front Panel:
- Blue transparent acrylic/polycarbonate window
- Pressure Regulator:
- Included — with analog gauge, mounted on side
- Solenoid Valve:
- Included — green body, red actuator button
- Fittings Included:
- Stainless steel male threaded fitting; plastic elbow fitting
- Latching Mechanism:
- Quarter-turn cam lock on front panel
- Top Fittings:
- White plastic threaded port and black threaded port on top
- Application:
- Clean Room Chemical Supply, Semiconductor Fab
- Form Factor:
- Freestanding Enclosure
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes pressure regulator, solenoid valve, stainless and plastic fittings
- Condition Notes:
- Chemical resistant clean room container, 13x27.5x18.5 in. Inspected, good used condition, pulled from a working clean room environment. Pressure regulator, solenoid valve, and fittings included. Normal light wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Custom Tolerance Measurement Fixture for Mitutoyo 543-251B Dial Indicator No
Unbranded
$85.00Was: $175.00Custom Tolerance Measurement Fixture for Mitutoyo 543-251B Dial Indicator No GaugesThis is a custom-built, machined steel tolerance measurement fixture designed for use with the Mitutoyo 543-251B...30104- SKU:
- 30104
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 11.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Tolerance Measurement Fixture
- MPN:
- 543-251B
- Type:
- Dial Indicator Measurement Fixture
- SKU:
- 30104
- Compatible With:
- Mitutoyo 543-251B Dial Indicator
- Base Dimensions:
- 6" x 8.75"
- Table Dimensions:
- 6.5" x 7"
- Table Height Above Base:
- 6.25"
- Total Height:
- 17"
- Construction Material:
- Machined Steel
- Gauges Included:
- No
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- No gauges or indicators included. Fixture only.
- Form Factor:
- Benchtop
- Condition Notes:
- Custom tolerance measurement fixture for Mitutoyo 543-251B. Inspected, in good condition, pulled from a working shop environment. Normal surface wear. Structurally sound. No gauges or indicators included — fixture only.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
Stainless Steel SMA-M to Right Angle SMA-M Coaxial Cable 7in 0.086in Semi-Rigid
Unbranded
$25.00Was: $50.00Stainless Steel SMA-M to Right Angle SMA-M Coaxial Cable 7in 0.086in Semi-Rigid RFSemi-rigid coaxial cable assembly with SMA male connectors (one straight, one right-angle). Used for RF and microwave...30014- SKU:
- 30014
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- SMA-M to Right Angle SMA-M Semi-Rigid Cable
- Type:
- Semi-Rigid Coaxial Cable Assembly
- SKU:
- 30014
- Connector 1:
- SMA Male (Straight)
- Connector 2:
- SMA Male (Right Angle / 90°)
- Cable Length:
- Approx. 7 inches
- Cable Diameter:
- 0.086 in (2.2 mm)
- Cable Type:
- Semi-Rigid Coaxial (0.086)
- Jacket / Body Material:
- Stainless Steel
- Impedance:
- 50 Ohm
- Application:
- RF, Microwave, Lab Bench Interconnect
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Cable only; no additional accessories included.
- Country/Region of Manufacture:
- Unknown
- Condition Notes:
- Stainless steel semi-rigid SMA-M to right-angle SMA-M coaxial cable, inspected and in good used condition. Pulled from a working RF environment. Both connectors are clean with no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Semi-Rigid Coax Cable 4" SMA-Male to SMA-Male Right Angle RF Microwave 0.141
Unbranded
$12.00Was: $25.00Semi-Rigid Coax Cable 4" SMA-Male to SMA-Male Right Angle RF Microwave 0.141Semi-rigid coaxial cable with SMA male connectors on both ends, one straight and one at 90 degrees. Used to route RF and...29991- SKU:
- 29991
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- Semi-Rigid SMA-M to SMA-M 4in Right Angle
- Type:
- Semi-Rigid Coaxial RF Cable
- Connector 1:
- SMA Male (Straight)
- Connector 2:
- SMA Male (Right Angle / 90°)
- Cable Length:
- Approx. 4 inches (101.6 mm)
- Cable Outer Diameter:
- Approx. 0.141 in (3.58 mm)
- Cable Construction:
- Semi-Rigid Coaxial
- Impedance:
- 50 Ohm
- Application:
- RF, Microwave, Test & Measurement
- Condition:
- Used – Pulled from Working Environment
- SKU:
- 29991
- Seller Notes:
- Cable only — no accessories included.
- Condition Notes:
- New / Open Box. Unused, clean SMA connectors, straight cable, no visible damage. Original packaging may be opened or missing.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Unbranded Stainless Steel Coiled Coaxial Cable SMA Male Connectors 5 Inch RF
Unbranded
$18.00Was: $40.00Unbranded Stainless Steel Coiled Coaxial Cable SMA Male Connectors 5 Inch RFCoiled coaxial cable with SMA male connectors on both ends. Designed for RF and microwave applications requiring flexible,...29978- SKU:
- 29978
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- Coiled SMA-M Coaxial Cable 5 Inch
- Type:
- Coiled Coaxial Cable
- Connector Type:
- SMA Male (both ends)
- Cable Length:
- Approx. 5 inches (coiled)
- Cable Material:
- Stainless Steel
- Cable Style:
- Coiled / Helical
- Gender:
- Male to Male
- Application:
- RF, Microwave, Test and Measurement
- SKU:
- 29978
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Sold as shown. No additional accessories included.
- Condition Notes:
- Inspected and in good used condition. Pulled from a working environment. Stainless steel coil and SMA male connectors are intact with no visible damage. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
2-Way Apple Printer Data Switch 8 Pin DIN Manual A/B Selector Box
Unbranded
$35.00Was: $70.002-Way Apple Printer Data Switch 8 Pin DIN Manual A/B Selector BoxManual data switch for routing printer connections between two Apple devices. Uses a rotary selector to toggle between Port A and Port...29975- SKU:
- 29975
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 2-Way 8-Pin Apple Printer Data Switch
- Type:
- Manual A/B Data Switch
- Number of Ports:
- 3 (1x I/O, 1x A, 1x B)
- Connector Type:
- 8-Pin DIN (Mini-DIN)
- Switch Positions:
- 2 (A and B)
- Compatible With:
- Apple ImageWriter, Apple ImageWriter II
- Compatible With 2:
- Apple printers using 8-pin DIN serial interface
- Interface Type:
- 8-Pin DIN Serial
- Power Required:
- No — passive/mechanical switch
- Form Factor:
- Desktop
- SKU:
- 29975
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no cables included
- Condition Notes:
- Unbranded 2-way 8-pin Apple printer data switch. Used, inspected, in good condition. Pulled from a working environment. Rotary A/B selector and DIN ports intact. No cables included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Unbranded Stainless Steel Coiled Coaxial Cable SMA-Male to SMA-Female 10 Inch
Unbranded
$25.00Was: $50.00Unbranded Stainless Steel Coiled Coaxial Cable SMA-Male to SMA-Female 10 InchThis is a stainless steel coiled coaxial cable with an SMA-male connector on one end and an SMA-female connector on the...29971- SKU:
- 29971
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 11.00 LBS
- Brand:
- Unbranded
- Model:
- Coiled SMA Coaxial Cable 10 Inch
- Type:
- Coiled Coaxial Cable
- Connector 1:
- SMA Male
- Connector 2:
- SMA Female
- Cable Length:
- Approx. 10 inches (coiled)
- Cable Construction:
- Coiled / Helical
- Jacket / Body Material:
- Stainless Steel
- Connector Material:
- Stainless Steel with Gold Center Pin
- Impedance:
- 50 Ohm (standard SMA)
- Application:
- RF, Microwave, Lab Test, Signal Routing
- SKU:
- 29971
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Single coiled coaxial cable with SMA-M and SMA-F connectors included
- Condition Notes:
- Unbranded stainless steel coiled coaxial cable with SMA-M/F connectors. Inspected, good used condition. Pulled from a working environment. Coil body clean, connectors intact, gold center pins present. Normal light wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Unbranded Stainless Steel Coiled SMA-M RF Coaxial Cable Assembly 10 Inch Narrow
Unbranded
$20.00Was: $40.00Unbranded Stainless Steel Coiled SMA-M RF Coaxial Cable Assembly 10 Inch NarrowStainless steel coiled coaxial cable assembly with SMA male connector. Single rigid/semi-rigid coil configuration,...29970- SKU:
- 29970
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- N/A - Unbranded
- Type:
- Coiled Coaxial Cable Assembly
- SKU:
- 29970
- Connector Type:
- SMA Male (SMA-M)
- Cable Material:
- Stainless Steel
- Cable Style:
- Coiled / Narrow Wind
- Cable Length:
- Approx. 10 inches
- Cable Construction:
- Rigid / Semi-Rigid
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Single coiled SMA-M coaxial cable assembly, stainless steel, approx. 10 in.
- Condition Notes:
- Stainless steel coiled SMA-M coaxial cable assembly. Inspected, good used condition. Pulled from a working environment. No visible damage to coil, rod, or connectors. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $40.00