Unbranded

Unbranded 1/2" NPT Flash Heater Cylinder 38cm Long 9cm Dia Thermocouple

(No reviews yet) Write a Review
SKU:
32195
MPN:
1/2
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
10.00 LBS
Shipping:
Calculated at Checkout
  • Unbranded 1/2 NPT flash heater cylinder front-left view showing red anodized aluminum body, mounting feet, power wires, and yellow thermocouple connector
  • Unbranded 1/2 NPT flash heater right-side view showing red cylinder body, rear NPT outlet fitting, and white molex power connector
  • Unbranded 1/2 NPT flash heater bottom-side view showing cylinder body, mounting bracket feet, wire leads, and yellow thermocouple plug
  • Close-up of thermocouple connector and white molex power connector attached to flash heater wiring harness
  • Close-up of 1/2 NPT brass inlet or outlet port on red anodized aluminum flash heater cylinder end cap
$65.00
Was: $125.00
Current Stock: 1

Sold Out

Description

Unbranded 1/2" NPT Flash Heater Cylinder 38cm Long 9cm Dia Thermocouple

This flash heater cylinder is an inline tube heater designed for rapid heating applications in industrial and telecom systems. It connects via 1/2" NPT ports and includes an integral Type K thermocouple for temperature monitoring.

Specifications & What's Included

  • Dimensions: 38 cm length x 9 cm diameter
  • Connections: 1/2" NPT inlet and outlet
  • Housing: Red anodized aluminum
  • Temperature Sensor: Type K thermocouple with yellow connector
  • Mounting: Bracket-mount feet on cylinder ends
  • Includes thermocouple connector and power lead wires

Applications

Flash heater cylinders are used in telecommunications infrastructure, industrial processing, and utility applications requiring inline heating of fluids or gases. These units are commonly found in legacy telecom heating systems and industrial fluid management setups. The thermocouple enables direct temperature feedback for process control.

Condition: Used
This unbranded 1/2" NPT flash heater cylinder has been inspected and appears to be in good condition. The red anodized aluminum body shows light surface scuffing consistent with normal handling and prior use. The 1/2" NPT brass port visible in the photos looks clean with no visible damage to the threads. The attached thermocouple connector and power lead wires are present and intact. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Unbranded
Model:
Flash Heater 38cm x 9cm 1/2" NPT
Type:
Flash Heater / Inline Tube Heater
Inlet Connection:
1/2" NPT
Outlet Connection:
1/2" NPT
Cylinder Length:
38 cm
Cylinder Diameter:
9 cm
Housing Material:
Red Anodized Aluminum
Temperature Sensor:
Thermocouple (Type K yellow connector)
Mounting:
Bracket-mount feet (fixed to cylinder ends)
Condition:
Used – Inspected
SKU:
32195
Seller Notes:
Includes attached thermocouple connector and power lead wires
Condition Notes:
This unbranded 1/2" NPT flash heater cylinder has been inspected and is in good condition. Body shows light scuffing. NPT brass port threads appear clean. Thermocouple connector and power wires intact. Please contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Ceramic heating element assembly front view showing black housing with yellow caution label and attached wiring harness with multi-pin connectors Ceramic heating element assembly top-open view showing two ceramic encapsulated heater bars, wiring, and optical sensor inside black housing
Add to Cart
Quick view

Ceramic Heating Element Assembly 9.25-Inch 2x Heaters Optical Sensor Jolt

Generic

$35.00
Was: $70.00
Ceramic Heating Element Assembly 9.25-Inch 2x Heaters Optical Sensor Jolt Enhancer This ceramic heating element assembly contains two ceramic encapsulated heaters paired with an optical sensor. It...
20188
SKU:
20188
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Brand:
Unbranded
Model:
9.25-Inch Ceramic Heating Element Assembly
Type:
Ceramic Heating Element Assembly
SKU:
20188
Condition:
Used – Pulled from Working Environment
Number of Heaters:
2
Sensor Included:
Yes – 1 Optical Sensor
Width:
9.25 inches
Heater Type:
Ceramic Encapsulated
Connector Type:
Multi-pin keyed connectors (9-pin and 8-pin)
Compatible With:
Jolt Transparency Enhancer
Includes Wiring Harness:
Yes
Seller Notes:
Includes 2 ceramic encapsulated heaters, 1 optical sensor, and attached wiring harness with multi-pin connectors.
Condition Notes:
Ceramic heating element pulled from a working Jolt Transparency Enhancer. Housing intact, wiring harness and connectors present. Normal used wear. Both ceramic heaters and optical sensor included.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
UEC T1303 Type K thermocouple temperature probe in original packaging bag with label, shown with probe assembly in front UEC T1303 Type K thermocouple probe assembly showing LB conduit body housing and 4-inch stem with 1/2 NPT fitting, side view
Add to Cart
Quick view

UEC T1303 Type K Thermocouple Temperature Probe 4 in Stem 1/2 in NPT LB

Temperature Probe

$45.00
Was: $90.00
UEC T1303 Type K Thermocouple Temperature Probe 4 in Stem 1/2 in NPT LBThe UEC T1303 is a Type K thermocouple temperature probe assembled in a 1/2-inch NPT threaded fitting with a 4-inch stainless...
35813
SKU:
35813
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
UEC
Model:
T1303
MPN:
T1303
Type:
Type K Thermocouple Temperature Probe
SKU:
35813
CAGE Code:
88234
Contract Number:
SPO440-94-C-1242
Thermocouple Type:
Type K
Probe / Stem Length:
4 inches
Connection Type:
1/2 in NPT
Housing / Conduit Body:
LB Type, 1/2 in, 4.25 cu in volume
UL File Number:
E30640
Manufacture Date:
December 1994
Quantity:
1 each
Condition:
New – Open Box
Seller Notes:
New old stock in original packaging bag; conduit body cover included
Country/Region of Manufacture:
United States
Application:
Industrial temperature measurement
Form Factor:
In-line probe with LB conduit body housing
Condition Notes:
UEC T1303 Type K thermocouple probe. New old stock, unused, in original packaging bag (may be open). Label intact showing CAGE 88234, mfg DEC 1994. No wear or use evident.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov