null

Keithley

Keithley

  • Keithley 3722 Dual 1x48 Multiplexer Card shown with two 78DM REV A D-sub cables — three-quarter front view Keithley 3722 Dual 1x48 Multiplexer Card front panel showing MUX 1 CAT 2 and MUX 2 CAT 2 104-pin D-sub connectors and ventilation slots
    Add to Cart
    Quick view

    Keithley 3722 Dual 1x48 Multiplexer Card 96CH 300V Series 3700A w/ Cables

    Keithley

    $1,100.00
    Was: $2,200.00
    Keithley 3722 Dual 1x48 Multiplexer Card 96CH 300V Series 3700A w/ Cables The Keithley 3722 is a plug-in multiplexer card for the Keithley Series 3700A System Switch and Multimeter mainframe. It...
    52976
    SKU:
    52976
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Keithley
    Model:
    3722
    MPN:
    3722
    Type:
    Dual 1x48 Multiplexer Card
    SKU:
    52976
    Compatible With:
    Keithley Series 3700A Mainframe
    Number of Channels:
    96 two-pole or 48 four-pole
    Switching Capacity:
    300V, 1A switched; 2A carry; 60W, 125VA
    Bandwidth:
    25 MHz
    Relay Type:
    Latching Electromechanical
    Connector Type:
    104-pin D-sub (x2)
    Scan Rate:
    Over 110 channels/second
    Offset Voltage:
    1V
    Offset Current:
    100 pA
    Form Factor:
    Card/Module
    Backplane Interface:
    Analog backplane connection relays
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes 2x 78DM REV A cables. Not all channels working — sold as-is.
    Country/Region of Manufacture:
    China
    Condition Notes:
    This Keithley 3722 Dual 1x48 Multiplexer Card was powered on and tested at our facility. During testing, it was determined that not all channels are functioning.
    $1,100.00
    Was: $2,200.00
    Add to Cart Quick view
  • Photolithography shutter relay control rackmount enclosure – front panel view showing power switch and five indicator LEDs: AC Power, ARC Power, CCD Shutter, Mask Vacuum, ARC Lamp Shutter Photolithography shutter control enclosure – rear panel view showing isolated ground duplex outlet, IEC AC inlet, fuse holder, XLR connectors J5 and J6, and large circular mil-spec connectors J7 through J10 and D-sub J4
    Add to Cart
    Quick view

    Photolithography Shutter Control Rackmount Enclosure Relay I/O Astec Corcom

    Keithley

    $175.00
    Was: $350.00
    Photolithography Shutter Control Rackmount Enclosure Relay I/O Astec CorcomThis is a custom-built rackmount enclosure designed as a shutter and relay I/O control system, most likely for a...
    38746
    SKU:
    38746
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    41.00 LBS
    Brand:
    Unbranded
    Model:
    STA-U 9627/D 25249
    MPN:
    PC 6222 Rev C
    Secondary Model:
    PC 6222 Rev C
    SKU:
    38746
    Type:
    Shutter & Relay I/O Control Enclosure
    Condition:
    As-Is / For Parts or Not Working
    Form Factor:
    Rackmount, approximately 4U
    Application:
    Photolithography / Mask Aligner Shutter Control
    Front Panel Indicators:
    AC Power, ARC Power, CCD Shutter, Mask Vacuum, ARC Lamp Shutter
    Internal PSU 1:
    Astec PS ACV 5N9-1 (5V)
    Internal PSU 2:
    Astec PS ACV 12N5 (12V)
    EMI Filter:
    Corcom 10VK7, 10A, 120/250V, 50-60Hz
    Solid State Relay:
    Crydom D2425
    Relay I/O Board:
    PC 6222 Rev C, STA-U 9627/D 25249, copyright 1984
    Rear Connectors:
    J4 (D-sub), J5, J6 (XLR-style), J7, J8, J9, J10 (circular mil-spec)
    AC Outlet:
    Isolated Ground duplex outlet on rear panel
    Fuse Rating:
    15 Amp (rear panel)
    AC Input:
    IEC C14 inlet on rear panel
    EMI Filter Voltage:
    10A, 120/250V, 50-60Hz
    Board Copyright Year:
    1984
    Country/Region of Manufacture:
    United States (Corcom filter: Mexico)
    Seller Notes:
    Sold AS-IS for parts. Includes Astec PSUs, Corcom EMI filter, Crydom SSR, relay I/O board.
    Condition Notes:
    Sold AS-IS for parts or repair. Not tested, no functionality guaranteed. Contains Astec 5V & 12V PSUs, Corcom 10VK7 EMI filter, Crydom D2425 SSR, PC 6222 Rev C relay I/O board. Contact us with questions.
    $175.00
    Was: $350.00
    Add to Cart Quick view
  • Keithley M1142 Voltage Signal Conditioner – front face showing label with RS-485, +/-10V, code 0006, and 10-pin connector strip Keithley M1142 Voltage Signal Conditioner – rear/bottom view showing mirrored label and CE mark on blue housing
    Add to Cart
    Quick view

    Keithley M1142 Voltage Signal Conditioner RS-485 +/-10V 0006 10-Pin Made in USA

    Keithley

    $65.00
    Was: $125.00
    Keithley M1142 Voltage Signal Conditioner RS-485 +/-10V 0006 10-Pin Made in USAThe Keithley M1142 is a compact voltage signal conditioner module designed for use in industrial data acquisition and...
    46229
    SKU:
    46229
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.45 LBS
    Brand:
    Keithley
    Model:
    M1142
    MPN:
    M1142
    Type:
    Voltage Signal Conditioner
    SKU:
    46229
    Condition:
    Used – Pulled from Working Environment
    Signal Type:
    Voltage
    Voltage Range:
    +/-10V
    Interface:
    RS-485
    Connector Type:
    10-Pin
    Configuration Code:
    0006
    CE Certified:
    Yes
    Country/Region of Manufacture:
    United States
    Form Factor:
    Module
    Compatible With:
    Keithley KPCI, MetraByte, PLC data acquisition systems
    Seller Notes:
    Unit only; pulled from working environment, inspected.
    Condition Notes:
    Keithley M1142 Voltage Signal Conditioner, used, inspected, pulled from a working environment. Housing intact with minor scuffs. Label clean, 10-pin connector and studs present, no visible damage.
    $65.00
    Was: $125.00
    Add to Cart Quick view