Vacuum Chamber Accessories
Vacuum chamber accessories are essential components used to enhance the functionality and efficiency of vacuum chambers. These accessories include items such as vacuum pumps, vacuum gauges, vacuum valves, vacuum feedthroughs, and vacuum fittings. They are designed to create and maintain vacuum conditions within the chamber, allowing for the precise control of pressure levels. Vacuum chamber accessories are crucial for conducting various experiments, processes, and tests that require a controlled vacuum environment. These accessories play a vital role in ensuring optimal performance, reliability, and safety of vacuum chambers. Purchase the best quality Vacuum Chamber Accessories to maximize the efficiency of your vacuum setup.
-
Inficon Quadrex 100 017-010-G1 Residual Gas Analyzer RGA 1-100 amu Leybold
Leybold-Heraeus
$450.00Was: $900.00Inficon Quadrex 100 017-010-G1 Residual Gas Analyzer RGA 1-100 amu LeyboldResidual gas analyzer controller for vacuum system monitoring and leak detection. Measures gas composition across a 1 to 100...47139- SKU:
- 47139
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 35.00 LBS
- Brand:
- INFICON
- Model:
- Quadrex 100
- MPN:
- 017-010-G1
- Secondary Model:
- 017-010-G1
- SKU:
- 47139
- Type:
- Residual Gas Analyzer (RGA) Controller
- Manufacturer:
- Leybold Inficon (Leybold-Heraeus)
- Mass Range:
- 1 to 100 amu
- Display Formats:
- 5 (Analog, Bar Graph, Table, Leak Check, Bar Subtract)
- Display Storage:
- Up to 4 displays
- Power Requirements:
- 120V or 220V, 50-60 Hz, 0.5 KVA
- Fuse Rating:
- 120V: 1.5A S.B. / 220V: 0.75A S.B.
- Form Factor:
- Benchtop
- Internal Modules:
- Analog, Video, CPU, Control card slots (rear)
- Country/Region of Manufacture:
- United States
- Software Version:
- 2.00 (visible on screen)
- Application / Use Case:
- Residual gas analysis, vacuum system leak detection
- Condition:
- Used – Powers On, Menu Responds; PROGRAM LOSS & CABLE ERROR displayed
- Seller Notes:
- Unit only; no sensor/probe head included. Sold as-inspected.
- Condition Notes:
- Inficon Quadrex 100 RGA (017-010-G1) powers on, CRT lights, front panel menu responds. Displays PROGRAM LOSS and CABLE ERROR — no further testing possible. Good physical condition. Sold as-inspected.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$450.00Was: $900.00 -
Inficon Leybold-Heraeus CS751-120-A IEEE-488 GPIB Plug-In Module 751-120-A
Ificon Leybold-Heraeus
$125.00Was: $250.00Inficon Leybold-Heraeus CS751-120-A IEEE-488 GPIB Plug-In Module 751-120-AThe Inficon Leybold-Heraeus CS751-120-A is an IEEE-488 (GPIB) interface plug-in module designed for use in Inficon...45750- SKU:
- 45750
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- INFICON
- Model:
- CS751-120-A
- MPN:
- CS751-120-A
- Secondary Model:
- 751-120-A
- Assembly Number:
- 751-122
- PCB Reference:
- WS751-120-A
- Type:
- IEEE-488 GPIB Plug-In Interface Module
- Interface:
- IEEE-488 / GPIB
- Form Factor:
- Plug-In Card / Module
- Country/Region of Manufacture:
- United States
- Compatible With:
- Inficon Leybold-Heraeus deposition control systems
- Connector Type:
- IEEE-488 GPIB; multi-pin card-edge backplane connector
- Features:
- 488 Enable DIP switch; Device Address DIP switch; Data indicator
- Assembly Revision:
- Rev 2
- Condition:
- Used – Inspected
- SKU:
- 45750
- Seller Notes:
- Plug-in module only; no chassis or cables included.
- Condition Notes:
- Inficon Leybold-Heraeus CS751-120-A IEEE-488 GPIB plug-in module. Inspected and in good condition. PCB clean, card-edge contacts good, normal wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Metra Inc 1010-026 Stainless Steel Vacuum Line Filter NW40 KF40 QF Flange
Metra
$55.00Was: $100.00Metra Inc 1010-026 Stainless Steel Vacuum Line Filter NW40 KF40 QF FlangeIn-line vacuum filter with stainless steel body and woven wire mesh screen element. Removes particulates from vacuum lines in...45548- SKU:
- 45548
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Metra Inc
- Model:
- 1010-026
- MPN:
- 1010-026
- Type:
- In-Line Vacuum Filter
- SKU:
- 45548
- Flange Type:
- KF40 / NW40 / QF40 Quick Flange
- Flange OD:
- 2-1/8 in (approx. 54 mm)
- Filter Element:
- Woven wire mesh screen
- Body Material:
- Stainless Steel
- Connection Style:
- KF/QF Quick Flange (both ends)
- Application:
- Vacuum line particulate filtration
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Filter only; no clamps or centering rings included
- Condition Notes:
- Metra Inc 1010-026 stainless vacuum filter inspected and in good used condition. Body clean with minor surface scuffs. Both KF40 flanges undamaged. Internal mesh element intact. No clamps or centering rings included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Nagano Keiki KH15-PT14-C-200 Pressure Transmitter 0-200 kgf/cm² 24V DC 1-5V
Nagano Keiki Co
$85.00Was: $175.00Nagano Keiki KH15-PT14-C-200 Pressure Transmitter 0-200 kgf/cm² 24V DC 1-5VThe Nagano Keiki KH15-PT14-C-200 is a compact inline pressure transmitter designed for industrial process measurement. It...45521- SKU:
- 45521
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Nagano Keiki
- Model:
- KH15-PT14-C-200
- MPN:
- KH15-PT14-C-200-0.25
- Type:
- Pressure Transmitter
- SKU:
- 45521
- Pressure Range:
- 0-200 kgf/cm²
- Power Supply Voltage:
- 24V DC
- Output Signal:
- 1-5V DC
- Connector Type:
- 7-Pin Circular (MIL-style)
- Process Connection:
- Male threaded fitting (NPT/PT style)
- Form Factor:
- Inline / Inline Cylindrical
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no cable or connector included.
- Country/Region of Manufacture:
- Japan
- Condition Notes:
- Nagano Keiki KH15-PT14-C-200 pressure transmitter. Inspected, good used condition. Body and label intact; some surface oxidation on the process fitting typical of used industrial hardware. 7-pin connector undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
Nagano Keiki KH15-PT14-C-200-0.5 Pressure Transmitter 24V DC 1-5V DC 200 kgf/cm2
Nagano Keiki Co
$120.00Was: $250.00Nagano Keiki KH15-PT14-C-200-0.5 Pressure Transmitter 24V DC 1-5V DC 200 kgf/cm2Pressure transmitter that converts hydraulic, pneumatic, or fluid pressure measurements into a standardized 1–5V DC...45520- SKU:
- 45520
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Nagano Keiki
- Model:
- KH15-PT14-C-200-0.5
- MPN:
- KH15-PT14-C-200-0.5
- Type:
- Pressure Transmitter
- SKU:
- 45520
- Supply Voltage:
- 24V DC
- Output Signal:
- 1–5V DC
- Pressure Range:
- 0–200 kgf/cm²
- Electrical Connector:
- 6-pin circular mil-spec style connector
- Process Connection:
- Male threaded fitting (NPT/PT style, visible in photos)
- Form Factor:
- Inline / Threaded Body
- Application:
- Industrial process control, hydraulic, pneumatic systems
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- Nagano Keiki KH15-PT14-C-200-0.5 pressure transmitter. Inspected and in good used condition. Body intact, light surface marks from normal industrial use. Threaded port and 6-pin connector appear clean and undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$120.00Was: $250.00 -
Inficon Leybold-Heraeus Quadrex 200 901-002-G1 Residual Gas Analyzer 19" Rack
Leybold-Heraeus
$375.00Was: $750.00Inficon Leybold-Heraeus Quadrex 200 901-002-G1 Residual Gas Analyzer 19" RackResidual gas analyzer controller designed for vacuum system monitoring and residual gas analysis. 19" rackmount unit with...43953- SKU:
- 43953
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 38.00 LBS
- Brand:
- INFICON
- Model:
- Quadrex 200
- MPN:
- 901-002-G1
- Secondary Model:
- 901-002-G1
- SKU:
- 43953
- Type:
- Residual Gas Analyzer Controller
- Manufacturer (Historical):
- Leybold-Heraeus
- Form Factor:
- 19" Rackmount
- Power Requirements:
- 120V or 220V AC, 50-60 Hz, 0.5 KVA
- Fuse Rating:
- 120V: 1.5A S.B. / 220V: 0.75A S.B.
- Power Connector:
- IEC C13 inlet
- Display:
- Built-in CRT monitor
- Interface - Rear:
- VIDEO, CPU, CONTROL connectors (rear panel)
- Front Panel Controls:
- Numeric keypad, MENU, RESET, SAVE, MEM-X, COPY, GAIN, SCAN, CURSOR, RELAYS, CIEGAS, E-MULT, EMIS, POWER
- Application:
- Residual gas analysis, vacuum system monitoring
- Condition:
- Used – Powers On; Flashes PROGRAM LOSS and CABLE ERROR
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Unit only; no external sensor/analyzer tube included. Powers on, menu responds, see condition notes.
- Condition Notes:
- Inficon Quadrex 200 RGA Controller 901-002-G1 powers on, CRT display lights up, front-panel menu responds. Flashes PROGRAM LOSS and CABLE ERROR — likely no sensor head connected. Not tested further. Good cosmetic condition.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$375.00Was: $750.00 -
Micro Weld A554 Vacuum Feedthrough Stainless Steel Shaft D-Sub Connector Valve
Micro Weld
$125.00Was: $250.00Micro Weld A554 Vacuum Feedthrough Stainless Steel Shaft D-Sub Connector ValveMechanical vacuum feedthrough with stainless steel shaft and D-Sub multi-pin connector. Enables signal and motion...41525- SKU:
- 41525
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 7.00 LBS
- Brand:
- Micro Weld
- Model:
- A554
- MPN:
- A554
- Type:
- Mechanical Vacuum Feedthrough
- SKU:
- 41525
- Condition:
- Used – Inspected
- Shaft Material:
- Stainless Steel
- Body Material:
- Brass
- Connector Type:
- D-Sub (Multi-pin), approximately 37-pin
- Additional Fitting:
- Integral brass gas/vacuum valve with green handle
- Coil Assembly:
- Wire coil wound on cylindrical end body
- Application / Use Case:
- Vacuum chamber signal and motion feedthrough
- Compatible With:
- Vacuum chambers, deposition systems, research chambers
- Seller Notes:
- Unit only — no additional accessories included
- Condition Notes:
- Micro Weld A554 vacuum feedthrough inspected and in good used condition. Stainless shaft straight and intact; brass ends show oxidation and lab patina; solder/epoxy residue at shaft seal. D-Sub connector and pin array appear complete.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Stainless Steel Vacuum Pressure Sensor DN63KF Ports MS3102E14S-1P ITT 9309
Unbranded
$150.00Was: $300.00Stainless Steel Vacuum Pressure Sensor DN63KF Ports MS3102E14S-1P ITT 9309Electronic vacuum and pressure sensor with dual DN63KF flanges and MIL-spec circular connector. Designed for inline or...41142- SKU:
- 41142
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 7.00 LBS
- Brand:
- Unbranded
- Model:
- ITT 9309
- MPN:
- ITT 9309
- Secondary Model:
- MS3102E14S-1P
- Type:
- Electronic Vacuum / Pressure Sensor
- SKU:
- 41142
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Sensor body with dual DN63KF flanges and MS3102E14S-1P connector. No cable.
- Connector Type:
- MS3102E14S-1P (MIL-C-5015 circular mil-spec)
- Port / Flange Type:
- DN63KF (KF63 / NW63) — 2 ports
- Flange Inner Diameter:
- 1.75 in
- Flange Outer Diameter:
- 2.5 in
- Overall Height:
- 4 in
- Overall Width:
- 7.5 in
- Body Material:
- Stainless Steel / Aluminum
- Application:
- High-vacuum chamber pressure / vacuum measurement
- Compatible With:
- DN63KF / NW63 / KF63 vacuum systems and chambers
- Form Factor:
- Inline / Tee-body vacuum sensor
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Used stainless steel vacuum/pressure sensor ITT 9309, MS3102E14S-1P connector. Inspected, good condition. Pulled from working service. DN63KF flanges and mil-spec connectors intact. No cable included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Stainless Steel Vacuum Port 1" OD KF Flange 3/8" Barb Nipple 2" Threaded Cap
Stainless Steel
$45.00Was: $90.00Stainless Steel Vacuum Port 1" OD KF Flange 3/8" Barb Nipple 2" Threaded CapThis stainless steel vacuum port is a compact, polished fitting designed to pass a gas line or vacuum connection through a...41000- SKU:
- 41000
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- Vacuum Port 1" OD Flange 3/8" Nipple
- MPN:
- HTH991ADN
- Type:
- Vacuum Port Fitting
- SKU:
- 41000
- Material:
- Stainless Steel
- Flange OD:
- 1" (approx. 25mm) OD
- Nipple / Barb Size:
- 3/8"
- Cap Thread Size:
- 2" Threaded
- Cap Style:
- Knurled Threaded Cap
- Finish:
- Polished / Bright
- Connection Type:
- Flanged + Barb Nipple + Threaded Cap
- Application:
- Vacuum Chamber, Lab Vacuum Systems
- Seller Notes:
- Sold as pictured; includes vacuum port assembly with threaded cap.
- Condition:
- Used – Inspected and in Good Condition
- Condition Notes:
- Stainless steel vacuum port with 1" OD KF flange and 3/8" barb nipple. Inspected and in good used condition. Clean polished body, no cracks or corrosion. Knurled threaded base shows light handling wear. Openings clear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Cajon 316 Stainless Steel 3ft Braided Flex Hose 15/16" Fittings Vacuum Gas Line
Cajon
$40.00Was: $80.00Cajon 316 Stainless Steel 3ft Braided Flex Hose 15/16" Fittings Vacuum Gas LineThis Cajon 316 stainless steel braided flexible hose is a 3-foot vacuum-rated flex line fitted with 15/16" swaged end...40985- SKU:
- 40985
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Cajon
- Model:
- 316
- MPN:
- 316
- Type:
- Stainless Steel Braided Flexible Hose
- SKU:
- 40985
- Condition:
- Used – Pulled from Working Environment
- Material:
- 316 Stainless Steel
- Hose Length:
- 3 ft (36 inches)
- Fitting Size:
- 15/16"
- Fitting Type:
- Swaged / Compression End Fittings
- Construction:
- Stainless Steel Braided Exterior
- Application:
- Vacuum Systems, Gas Lines, Lab Equipment
- Seller Notes:
- Hose only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Cajon 316 SS 3ft braided flex hose in good used condition. Pulled from a working environment. Minor surface wear on braid and fittings; no kinks or damage. Both 15/16" end fittings intact. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $80.00 -
Stainless Steel Vacuum Blank 2.5" OD for 2" Conflat CF Flange Seal Cap Cover
Unbranded
$18.00Was: $40.00Stainless Steel Vacuum Blank 2.5" OD for 2" Conflat CF Flange Seal Cap CoverThis is a stainless steel vacuum blank disc sized for 2" Conflat (CF) flange fittings, with an outer diameter of 2.5"...40984- SKU:
- 40984
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- Vacuum Blank 2.5" OD / 2" CF Flange
- Type:
- Vacuum Blank Flange Cap
- Material:
- Stainless Steel
- Outer Diameter (OD):
- 2.5"
- Compatible Flange Size:
- 2.0" Conflat (CF) Flange
- Flange Standard:
- Conflat (CF)
- Application:
- High Vacuum / UHV Chamber Port Sealing
- Form Factor:
- Flat Disc / Blank Flange
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Blank only — no fasteners or gasket included.
- SKU:
- 40984
- Condition Notes:
- Stainless steel vacuum blank, 2.5" OD / 2" CF flange. Pulled from a working vacuum system. Inspected and in good used condition. Light surface scratches on disc face; sealing surfaces and rim intact. No cracks or damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
Cashco 8903 Stainless Steel Pressure Reducing Regulator 150 PSIG 300F Ryton EPDM
Cashco
$65.00Was: $125.00Cashco 8903 Stainless Steel Pressure Reducing Regulator 150 PSIG 300F Ryton EPDMThe Cashco 8903 is a stainless steel pressure reducing regulator designed for industrial process applications where...40982- SKU:
- 40982
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Cashco
- Model:
- 8903
- MPN:
- 8903
- Type:
- Pressure Reducing Regulator
- SKU:
- 40982
- Configuration Code:
- C-6PV-INV
- Trim / Seat Code:
- CFBM
- Seat / Seal Material:
- Ryton / EPDM (R1)
- Body Material:
- Stainless Steel
- Maximum Pressure Rating:
- 150 PSIG
- Maximum Temperature Rating:
- 300°F
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Regulator only, no additional accessories included.
- Country/Region of Manufacture:
- United States
- Application:
- Industrial Process, Chemical, Sanitary, Fluid Control
- End Connection Type:
- Flanged Base
- Condition Notes:
- Cashco 8903 stainless steel pressure reducing regulator. Inspected and in good used condition. Body, flange, and handle assembly intact. Light surface marks consistent with normal use. No cracks or damage observed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
KF Stainless Steel Vacuum Line Adapter Pipe Fitting OD 3-1/16" to 1" ID 3/8"
Unbranded
$12.00Was: $25.00KF Stainless Steel Vacuum Line Adapter Pipe Fitting OD 3-1/16" to 1" ID 3/8"This is an unbranded KF-style stainless steel vacuum line adapter designed to transition between two different outer...40972- SKU:
- 40972
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- KF Vacuum Line Adapter
- Type:
- Vacuum Line Adapter / Pipe Fitting
- SKU:
- 40972
- Material:
- Stainless Steel with Brass Knurled Locking Nut
- Opening 1 OD:
- 3-1/16"
- Opening 1 ID:
- 3/8"
- Opening 2 OD:
- 1"
- Opening 2 ID:
- 3/8"
- Seal Type:
- O-Ring (Yellow)
- Connection Type:
- KF / NW Flange
- Condition:
- Used – Pulled from Working Environment
- Application:
- Vacuum System, Vacuum Chamber
- Seller Notes:
- Includes yellow O-ring seal and brass knurled locking nut
- Condition Notes:
- KF stainless steel vacuum line adapter pulled from a working vacuum system. Inspected — good used condition. Surface oxidation and staining on flange face and body. Brass knurled nut intact, yellow O-ring present, bore clear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Unbranded Electronic Shutter Assembly Mask Aligner Semiconductor UV Optics DB9
Generic
$150.00Was: $300.00Unbranded Electronic Shutter Assembly Mask Aligner Semiconductor UV Optics DB9This is an unbranded electronic shutter assembly removed from a mask aligner UV exposure system. The assembly consists of...40971- SKU:
- 40971
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Unbranded
- Model:
- Electronic Shutter Assembly
- Type:
- Electronic Shutter Assembly
- Application:
- Mask Aligner / Photolithography UV Exposure System
- Actuator Type:
- Rotary Solenoid
- Connector Type:
- DB9 Male (9-pin D-sub)
- Housing Material:
- Black Anodized Aluminum
- Number of Optical Apertures:
- 2 (one per housing block)
- Aperture Style:
- Circular, with shutter blade/disc
- Mounting Base:
- Integrated black anodized aluminum baseplate
- Cable:
- Gray multi-conductor cable with red/white leads
- Dimensions (approx.):
- 7 in x 6 in x 5 in
- Form Factor:
- Benchtop / Inline Module
- Compatible With:
- Mask Aligner UV Exposure Systems
- SKU:
- 40971
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes integrated cable and DB9 connector; pulled from a working mask aligner.
- Condition Notes:
- Unbranded mask aligner electronic shutter assembly pulled from a working environment. Inspected and in good condition — housings show light surface wear. Solenoid actuator, shutter discs, cable, and DB9 connector all present and appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Riber ACE 576 N E-Gun Power Supply Analytical Chamber 220V 500mA Rackmount
Riber
$700.00Was: $1,400.00Riber ACE 576 N E-Gun Power Supply Analytical Chamber 220V 500mA RackmountRiber electron gun power supply designed for analytical and molecular beam epitaxy (MBE) chamber applications. Supplies...40630- SKU:
- 40630
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 46.00 LBS
- Brand:
- Riber
- Model:
- ACE 576 N
- MPN:
- ACE 576 N
- Secondary Model:
- 600.045
- Serial Number (Internal):
- I7666
- Type:
- Electron Gun (E-Gun) Power Supply
- SKU:
- 40630
- Voltage Rating:
- 220V
- Current Rating:
- 500mA
- Power Requirements:
- 220V AC
- Code / Configuration:
- 250 IOI 60 P
- OF Number:
- 7I7290
- Application / Use Case:
- Electron Gun Power Supply for Analytical/MBE Chamber
- Filament Current Limit:
- 2.7A / 3.7A selectable
- HV Controls:
- H.T. (High Tension), Wehnelt Grid, Lens
- Regulation Mode:
- Selectable (-100 to +100 Grid)
- Emission Control:
- If / Ie selectable
- Modulation Input:
- J18 — Modulation Input connector
- Remote Control:
- H.V. Remote Control (J16), Local/Distance switch
- Connectors — Front:
- Multi-pin Cannon/Gun connector, BNC
- Connectors — Rear:
- J14, J15, J17, J19 (Cannon), J20, J21, J22 (IEC power), J23
- Scanning Inputs:
- Entrees Balayage / Scanning Inputs (J20)
- Display:
- Newport red LED digital readout
- Form Factor:
- Rackmount
- Country/Region of Manufacture:
- France
- Condition:
- Used – Inspected and in Good Condition
- Included Accessories:
- Multi-pin braided cannon cable with two connectors
- Seller Notes:
- Includes multi-pin braided cannon interface cable with two connectors.
- Condition Notes:
- Riber ACE 576 N E-Gun Power Supply, inspected and in good condition. Normal cosmetic wear from lab use. Multi-pin cannon cable included. Front panel controls and LED display intact. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$700.00Was: $1,400.00 -
Senior Flexonics 304-3/4 Flexible SS Braided Hose 28" 3/4" ID 304 Stainless
Senior Flexonics
$25.00Was: $50.00Senior Flexonics 304-3/4 Flexible SS Braided Hose 28" 3/4" ID 304 Stainless SteelThe Senior Flexonics 304-3/4 is a flexible metal hose constructed with a corrugated 304 stainless steel inner core and...40050- SKU:
- 40050
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Senior Flexonics
- Model:
- 304-3/4
- MPN:
- 304-3/4
- Type:
- Flexible Stainless Steel Braided Hose
- SKU:
- 40050
- Material:
- 304 Stainless Steel
- Overall Length:
- 28 inches
- Nominal Hose ID:
- 0.75 in (3/4")
- Nominal Hose OD:
- 1.05 in
- High Pressure Nut OD:
- 1.25 in
- Open Thread End OD:
- 1.05 in
- End Connection Type:
- One male threaded end, one female swivel nut
- Braid Type:
- Stainless Steel Wire Braid
- Application:
- Vacuum, gas, fluid transfer, industrial piping
- Condition:
- Used – Inspected, Good Condition
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Hose only; no additional accessories included.
- Condition Notes:
- Senior Flexonics 304-3/4 flexible SS braided hose inspected and in good used condition. Braid intact, threads and bore clean. Fittings show surface oxidation typical of prior use. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Consolidated Precision Corp B-8000-016-096 1.5" Braided Steel Vacuum Hose 8 Ft
Consolidated Precision Corp.
$70.00Was: $150.00Consolidated Precision Corp B-8000-016-096 1.5" Braided Steel Vacuum Hose 8 FtThe Consolidated Precision Corp B-8000-016-096 is a flexible braided stainless steel vacuum hose measuring 1.5 inches in...39958- SKU:
- 39958
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Consolidated Precision Corp
- Model:
- B-8000-016-096
- MPN:
- B-8000-016-096
- Type:
- Braided Stainless Steel Flexible Vacuum Hose
- SKU:
- 39958
- Hose Inner Diameter:
- 1.5 in
- Hose Length:
- 8 ft (96 in)
- Material:
- Stainless Steel Braided
- End Fittings:
- Female Threaded, Both Ends
- Application:
- Vacuum Systems, Industrial Fluid Transfer
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Hose only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Consolidated Precision Corp B-8000-016-096 1.5" braided stainless vacuum hose inspected and in good used condition. Braid intact, no kinking. Both threaded fittings present; one end shows light surface oxidation/discoloration. Structurally sound.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$70.00Was: $150.00 -
Taber Teledyne 176-SA Electrical Pressure Transmitter 0-1000 PSI 350 Ohm
Teledyne Taber
$125.00Was: $250.00Taber Teledyne 176-SA Electrical Pressure Transmitter 0-1000 PSI 350 OhmElectrical pressure transmitter with 0–1000 PSI range and 350-ohm bridge resistance output. Stainless steel and aluminum alloy...39252- SKU:
- 39252
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Taber Instrument Corporation
- Model:
- 176-SA
- MPN:
- 176-SA
- Type:
- Electrical Pressure Transmitter
- SKU:
- 39252
- Pressure Range:
- 0–1000 PSI
- Bridge Resistance:
- 350 Ohms
- Connector Type:
- Multi-pin circular military-style connector
- Body Material:
- Stainless steel / aluminum alloy
- Manufacturer:
- Taber Instrument Corporation, North Tonawanda, NY, USA
- Associated Brand:
- Teledyne
- Application:
- Aerospace, rocket motor chamber pressure measurement
- Service Medium:
- Liquid Fluorine (per unit label)
- Country/Region of Manufacture:
- United States
- Form Factor:
- Cylindrical body with threaded pressure port
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from aerospace rocket motor service.
- Condition Notes:
- Taber Teledyne 176-SA Pressure Transmitter pulled from active service, inspected and in good used condition. Body shows normal wear; connector has surface oxidation. LIQUID FLUORINE service labels present. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Stainless Steel Vacuum Flange Ring O.D. 10.375" I.D. 5.75" Device 44
SS
$65.00Was: $125.00Stainless Steel Vacuum Flange Ring O.D. 10.375" I.D. 5.75" Device 44This is a precision-machined stainless steel vacuum flange ring with an outer diameter of 10.375 inches and an inner diameter of 5...38392- SKU:
- 38392
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Unbranded
- Model:
- Device 44
- MPN:
- Device 44
- Type:
- Vacuum Flange Ring
- SKU:
- 38392
- Material:
- Stainless Steel
- Outer Diameter (O.D.):
- 10.375 in
- Inner Diameter (I.D.):
- 5.75 in
- Condition:
- Used – Inspected
- Seller Notes:
- Component only; no additional hardware included.
- Application / Use Case:
- Vacuum chamber system accessory
- Compatible With:
- Vacuum deposition, CVD, PVD, semiconductor systems
- Surface Finish:
- Machined stainless steel
- Mounting:
- Multiple drilled mounting holes around perimeter
- Form Factor:
- Ring / Flange
- Condition Notes:
- Stainless steel vacuum flange ring 10.375" OD x 5.75" ID, Device 44. Inspected and in good used condition. Machined surfaces clean; minor handling marks. Mounting holes intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Stainless Steel Vacuum Flange Plate 4" OD 4-1/8" Center 1/2" ID Port
SS
$25.00Was: $50.00Stainless Steel Vacuum Flange Plate 4" OD 4-1/8" Center 1/2" ID PortThis is a solid stainless steel vacuum flange plate featuring a center bore port and multiple countersunk mounting holes arranged...38390- SKU:
- 38390
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- Vacuum Flange Plate 4" OD
- MPN:
- 38390
- SKU:
- 38390
- Type:
- Vacuum Flange / Blanking Plate
- Material:
- Stainless Steel
- Outer Diameter (OD):
- 4 inches (approx.)
- Center Port Inner Diameter (ID):
- 1/2 inch (approx.)
- Bolt Circle Diameter:
- 4-1/8 inches (approx.)
- Mounting Holes:
- Multiple countersunk mounting holes visible
- Finish:
- Machined stainless steel, brushed/turned face
- Compatible With:
- Vacuum chambers, vacuum deposition systems
- Application:
- Vacuum chamber port sealing, feedthrough mounting
- Condition:
- Used – Inspected
- Seller Notes:
- Flange plate only; no additional hardware included
- Condition Notes:
- Stainless steel vacuum flange plate, inspected and in good used condition. Surface shows light discoloration and minor oxidation typical of age. Center bore and mounting holes intact. Flange plate only, no hardware included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00