Networking

Networking

  • Metraplex 183-49 signal conditioner rackmount chassis – front three-quarter view showing installed plug-in modules with indicator LEDs Metraplex 183-49 signal conditioner – rear three-quarter view showing multiple BNC output connectors and power supply heat sink with power cable

    Metraplex 183-49 Signal Conditioner VCO Frequency Discriminator Rackmount

    Metraplex

    $300.00
    Was: $600.00
    Metraplex 183-49 Signal Conditioner VCO Frequency Discriminator RackmountThe Metraplex 183-49 is a rackmount multi-channel signal conditioner chassis populated with plug-in oscillator and...
    24421
    SKU:
    24421
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    41.00 LBS
    Brand:
    Metraplex
    Model:
    183-49
    MPN:
    183-49
    Secondary Model:
    2934
    SKU:
    24421
    Type:
    Signal Conditioner
    Form Factor:
    Rackmount Chassis
    Module Types Installed:
    I14 VCO Oscillator, I20 Frequency Discriminator
    Frequency Range:
    450 kHz ±20%, 64 kHz ±8 kHz
    Connector Type:
    BNC
    Number of Rear BNC Connectors:
    Approximately 30 (J1–J30 labeled)
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Includes all installed plug-in modules; oscillators and discriminators tested working
    Country/Region of Manufacture:
    United States
    Application:
    Telemetry, aerospace data acquisition, signal conditioning
    Condition Notes:
    Metraplex 183-49 Signal Conditioner tested in good working condition. I14 VCO oscillator modules and I20 frequency discriminator modules confirmed working. Chassis shows normal wear. Inspected and good.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $300.00
    Was: $600.00
  • GNP PDSi 1-503751 3U cPSB 8FE+2GE Switch Module — front panel view showing RJ-45 ports, LED indicators, and power LED GNP PDSi 1-503751 Ethernet Switch Module — rear/board view showing PCB components, ICs, and CompactPCI edge connector

    GNP PDSi 1-503751 Rev C 3U cPCI cPSB 8FE 2GE Ethernet Switch Module

    GNP

    $95.00
    Was: $200.00
    GNP PDSi 1-503751 Rev C 3U cPCI cPSB 8FE 2GE Ethernet Switch ModuleManaged Ethernet switch module for 3U CompactPCI systems. This PCB provides network connectivity with 8 Fast Ethernet ports and 2...
    24415
    SKU:
    24415
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    GNP PDSi
    Model:
    1-503751
    MPN:
    1-503751
    PCB Revision:
    Rev C
    Type:
    Embedded Ethernet Switch Module
    SKU:
    24415
    Form Factor:
    3U CompactPCI / cPSB
    Number of Ports:
    10 (8x Fast Ethernet + 2x Gigabit Ethernet)
    Fast Ethernet Ports:
    8
    Gigabit Ethernet Ports:
    2
    Port Speed:
    10/100 Mbps (FE), 1 Gbps (GE)
    Bus Interface:
    cPSB / CompactPCI
    Management Type:
    Managed
    Interface Type:
    Ethernet, Fast Ethernet, Gigabit Ethernet
    Connector Type:
    RJ-45, CompactPCI backplane
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    PCB only — no chassis or accessories included
    Compatible With:
    3U cPSB / CompactPCI chassis and backplanes
    Condition Notes:
    GNP PDSi 1-503751 Rev C 3U cPSB 8FE+2GE Switch Module. Inspected and in good used condition. Normal light wear from prior installation. Ports and edge connector appear intact and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • GNP PDSi 1-503753C1 3U cPSB Switch RTM – front panel view showing Port 6, 7, 8, Port 9 (1000MB) RJ45 ports and Console port GNP PDSi 1-503753C1 3U cPSB Switch RTM – rear/board view showing CompactPCI backplane connectors and PCB layout

    GNP PDSi 3U cPSB 8FE+2GE Switch RTM 1-503753C1 Rev B CompactPCI RTM

    GNP

    $65.00
    Was: $125.00
    GNP PDSi 3U cPSB 8FE+2GE Switch RTM 1-503753C1 Rev B CompactPCI RTMRear Transition Module (RTM) for CompactPCI systems providing integrated Ethernet switching. This card plugs into a 3U CompactPCI...
    24413
    SKU:
    24413
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    GNP PDSi
    Model:
    1-503753C1
    MPN:
    1-503753C1
    Secondary Model:
    1-503753+1 Rev B
    Type:
    CompactPCI Rear Transition Module (RTM)
    SKU:
    24413
    Form Factor:
    3U CompactPCI (cPSB) RTM
    Number of Ports:
    8 Fast Ethernet (FE) + 2 Gigabit Ethernet (GE)
    Port Type:
    RJ45 (Fast Ethernet); RJ45 1000MB (Gigabit); Console
    Switch Type:
    8FE + 2GE Ethernet Switch RTM
    Connector Type:
    RJ45
    Hardware Revision:
    Rev B
    PCB Number:
    PCB# 1-503753C1 Rev B
    Manufacture Date:
    August 15, 2003
    Country/Region of Manufacture:
    United States
    Interface:
    CompactPCI (cPSB) backplane connector
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    RTM card only; no chassis or accessories included.
    Condition Notes:
    GNP PDSi 1-503753C1 3U cPSB 8FE+2GE Switch RTM Rev B. Inspected, in good condition. PCB clean, RJ45 and console ports intact, backplane connectors undamaged. Normal light wear from prior installation.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • GNP PDSi 3U cPSB 8+1 Switch RTM 1-503284C1 front panel showing four RJ-45 ports labeled Port 6, Port 7, Port 8, and MGT Port GNP PDSi 3U cPSB Switch RTM rear/top view showing SFP-style connector rows, GNP logo, PCB label, and backplane edge connector

    GNP PDSi 3U cPSB 8+1 Switch RTM PCB 1-503284C1 Rev A 4-Port RJ-45 MGT

    GNP

    $75.00
    Was: $150.00
    GNP PDSi 3U cPSB 8+1 Switch RTM PCB 1-503284C1 Rev A 4-Port RJ-45 MGTThis is a Rear Transition Module (RTM) designed for GNP PDSi 3U CompactPCI Switched Backplane systems. The RTM provides four RJ-45...
    24412
    SKU:
    24412
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    GNP PDSi
    Model:
    1-503284C1
    MPN:
    1-503284C1
    Type:
    Rear Transition Module (RTM)
    SKU:
    24412
    Hardware Revision:
    Rev A
    PCB Number:
    1-503284C1
    Form Factor:
    3U
    Switch Configuration:
    8+1
    Bus Architecture:
    cPSB (CompactPCI Switched Backplane)
    Number of Ports:
    4 (Port 6, Port 7, Port 8, MGT Port)
    Connector Type:
    RJ-45
    Interface Type:
    RJ-45 Ethernet + Management Port
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected
    Seller Notes:
    Module only; no additional accessories included.
    Compatible With:
    GNP PDSi 3U cPSB 8+1 Switch chassis
    Condition Notes:
    GNP PDSi 3U cPSB 8+1 Switch RTM 1-503284C1 Rev A. Inspected and in good used condition. Board shows normal wear; all RJ-45 ports and backplane connector appear intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Black Box MX330A-C 3174/3274 I-Mux — front-left three-quarter view showing 1U rackmount chassis, fiber optic link section, copper BNC port, and four controller BNC ports Black Box MX330A-C rear panel view showing IEC power inlet, power switch, warning label, rating plate, and copper/fiber output ports

    Black Box MX330A-C 3174/3274 4-Port Rackmount Controller Side I-Mux Fiber Coax

    Black Box

    $110.00
    Was: $225.00
    Black Box MX330A-C 3174/3274 4-Port Rackmount Controller Side I-Mux Fiber Coax Controller-side inverse multiplexer (I-Mux) for IBM 3174 and 3274 terminal control systems. Combines up to 4 controller...
    24357
    SKU:
    24357
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Black Box
    Model:
    MX330A-C
    MPN:
    MX330A-C
    SKU:
    24357
    Type:
    Controller Side I-Mux (Inverse Multiplexer)
    Compatible With:
    IBM 3174 Establishment Controller
    Compatible With 2:
    IBM 3274 Control Unit
    Number of Ports:
    4 (Controller/BNC coax input) + 1 multiplexed output
    Interface Type:
    BNC Coaxial (controller ports); Fiber Optic; Copper BNC
    Output Type:
    Fiber Optic or Copper (BNC) — selectable via rear switch
    Max Terminal Signals:
    Up to 32 terminal signals
    Connector Type:
    BNC (coax controller ports and copper output); ST or SMA (fiber)
    Form Factor:
    1U Rackmount
    Power Requirements:
    100-120 VAC, 0.3A, 47-63 Hz
    Fuse Rating:
    T 250V 0.8A
    Certifications:
    UL Listed (1N17), ITE E160629, GS
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Includes original manual. Does not include device-side mux.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Black Box MX330A-C Controller Side I-Mux inspected and in good condition. Light shelf wear only. Includes original manual. Does not include device-side mux. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • Cavium CN1120-350-NFB Nitrox XL PCI-X security accelerator card — angled front view showing DB-9 connector and blue shielded module Cavium CN1120-350-NFB Nitrox XL PCI-X accelerator card — angled rear view showing full PCI edge connector and blue EMI shield

    Cavium CN1120-350-NFB Nitrox XL SSL IPSec Security Accelerator PCI-X Card Rev

    Cavium

    $75.00
    Was: $150.00
    Cavium CN1120-350-NFB Nitrox XL SSL IPSec Security Accelerator PCI-X Card Rev 3.0Hardware security accelerator card for SSL and IPSec encryption. Processes cryptographic operations offload from host...
    24336
    SKU:
    24336
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Cavium Networks
    Model:
    CN1120-350-NFB
    MPN:
    CN1120-350-NFB
    SKU:
    24336
    Type:
    Hardware SSL/IPSec Security Accelerator Card
    Hardware Revision:
    Rev 3.0
    Bus Interface:
    PCI / PCI-X
    Bus Width:
    64-bit
    Bus Speed:
    66 MHz
    Voltage:
    3.3V / 5V Universal
    Form Factor:
    Half-Height PCI Card
    Protocols Supported:
    SSL, IPSec, 3DES, SHA1, ARC4, MD5
    IPSec Throughput:
    1,000 Mbps (3DES + SHA1)
    SSL Record Throughput:
    1,000 Mbps (ARC4 + MD5)
    RSA Performance:
    14,000 RSA 1024-bit ops/sec
    DH Performance:
    24,000 DH 1024-bit ops/sec
    Connector:
    DB-9 (external), header pins
    Condition:
    Used – Inspected and Pulled from Working Environment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Card only. No bracket or accessories included.
    Condition Notes:
    Cavium CN1120-350-NFB Nitrox XL PCI-X security accelerator. Inspected, good condition. EMI shield shows light wear; PCI-X edge connector clean. Pulled from a working environment.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • GNP 1-503821A 3U cPSB 8FE+2GE Switch RTM front panel showing RJ45 Fast Ethernet ports, two Gigabit Ethernet ports, and console port with ejector handle GNP 1-503821A cPCI Rear Transition Module PCB reverse side showing J2 backplane connector and board layout

    GNP 1-503821A PDSi 3U cPSB 8FE+2GE Switch RTM cPCI Rear Transition Module

    GNP

    $95.00
    Was: $200.00
    GNP 1-503821A PDSi 3U cPSB 8FE+2GE Switch RTM cPCI Rear Transition ModuleThis is a CompactPCI rear transition module designed for GNP PDSi chassis systems. It provides network switching and...
    24332
    SKU:
    24332
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    GNP
    Model:
    1-503821A
    MPN:
    1-503821A
    Secondary Model:
    1-503754 Rev B
    Type:
    cPCI Rear Transition Module (RTM)
    SKU:
    24332
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Form Factor:
    3U CompactPCI (cPCI) Module
    Bus Type:
    CompactPCI (cPCI) Standard Bus
    Connector:
    J2 Connection
    Number of Ports:
    10 (8x Fast Ethernet + 2x Gigabit Ethernet + Console)
    Port Types:
    8x 10/100 FE RJ45, 2x GE (1000MB) RJ45, 1x Console RJ45
    Interface Type:
    Fast Ethernet, Gigabit Ethernet
    PCB Number:
    1-503753C1 Rev B
    Manufacture Date:
    August 15, 2003
    Compatible With:
    GNP PDSi CompactPCI chassis systems
    Condition Notes:
    GNP 1-503821A 3U cPSB 8FE+2GE Switch RTM. Inspected, in good condition. Pulled from a working environment where it was in use. Normal handling wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • GNP 1-503285 AM 3U cPSB 8+1 RTM cPCI Switch Board — front view showing four RJ-45 ports (Port 1, Port 2, Port 3, MGT Port) and ejector handle GNP 1-503285 AM cPCI Switch Board — rear/top view showing J2 connector, GNP label, board traces, and RJ-45 port array

    GNP 1-503285 AM 3U cPSB 8+1 RTM cPCI Switch Board J2 PDSi Module

    GNP

    $65.00
    Was: $125.00
    GNP 1-503285 AM 3U cPSB 8+1 RTM cPCI Switch Board J2 PDSi ModuleThe GNP 1-503285 AM is a 3U CompactPCI (cPCI) Peripheral Switch Board (cPSB) configured as an 8+1 Rear Transition Module (RTM) with a...
    24331
    SKU:
    24331
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    GNP
    Model:
    1-503285 AM
    MPN:
    1-503285 AM
    Type:
    3U CompactPCI Peripheral Switch Board / RTM
    SKU:
    24331
    Form Factor:
    3U CompactPCI (cPCI)
    Bus Type:
    CompactPCI (cPCI)
    Configuration:
    8+1 Switch
    Module Type:
    Rear Transition Module (RTM)
    Connector:
    J2
    Interface:
    cPCI Standard Bus with J2 Connection
    Number of Ports:
    3 data ports + 1 management port (RJ-45)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Board only; pulled from a working cPCI system environment.
    Compatible With:
    CompactPCI (cPCI) 3U chassis and backplane systems
    Condition Notes:
    GNP 1-503285 AM 3U cPSB cPCI Switch Board. Inspected, in good condition. Pulled from a working cPCI system environment. Normal handling wear. RJ-45 ports and J2 connector appear intact. View photos; contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Black Box SR-3020-Q rackmount switch box — front panel view showing Black Box logo, selector knobs, and port indicators Black Box SR-3020-Q front panel close-up showing P1–P5 port labels, SW1/SW2 switches, red keyboard-lock button, and one missing knob

    Black Box SR-3020-Q Rackmount KVM Switch Box 5-Port DB9 PS/2 Serial

    Black Box

    $45.00
    Was: $90.00
    Black Box SR-3020-Q Rackmount KVM Switch Box 5-Port DB9 PS/2 SerialThe Black Box SR-3020-Q is a rackmount switch box that allows a single keyboard, video monitor, and mouse (KVM) console to be shared...
    24328
    SKU:
    24328
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    10.00 LBS
    Brand:
    Black Box
    Model:
    SR-3020-Q
    MPN:
    SR-3020-Q
    Type:
    Rackmount KVM / Serial Switch Box
    SKU:
    24328
    Number of Ports:
    5
    Form Factor:
    Rack Mount
    Connector Types:
    DB9, PS/2 (Mini-DIN 6), DIN, DB15
    Interface Type:
    Serial / KVM
    Selector:
    Rotary knob (one of three knobs broken)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected; one selector knob broken off
    Seller Notes:
    One of three selector knobs is broken off. Unit sold as-is for this cosmetic damage.
    Condition Notes:
    Black Box SR-3020-Q Rackmount KVM Switch Box. Inspected; good overall condition. One of three front-panel selector knobs is broken off — post intact. Rear connectors clean. See photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • GarrettCom DS12-CPCI 12-Port 10/100 Hub cPCI Card — front panel view showing 12 RJ-45 ports and BLADE label GarrettCom DS12-CPCI Magnum Blade Hub Card — PCB top view showing capacitors, heatsinks, and yellow power connector

    GarrettCom Magnum Blade DS12-CPCI 12-Port 10/100 Dual Speed Hub cPCI Card 6U

    Garrett Communications

    $175.00
    Was: $350.00
    GarrettCom Magnum Blade DS12-CPCI 12-Port 10/100 Dual Speed Hub cPCI Card 6UThis is a CompactPCI Ethernet hub card designed for use in GarrettCom Magnum CompactPCI chassis systems. It provides 12...
    24222
    SKU:
    24222
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    GarrettCom
    Model:
    DS12-CPCI
    MPN:
    DS12-CPCI
    Secondary Model:
    Magnum Blade DS12
    Type:
    CompactPCI (cPCI) Ethernet Hub Card
    SKU:
    24222
    Number of Ports:
    12
    Port Speed:
    10/100 Mbps (Dual Speed)
    Connector Type:
    RJ-45
    Form Factor:
    CompactPCI (cPCI) Card, 6U
    Slot Type:
    6U Rear I/O — does not connect to backplane
    Network Standard:
    IEEE 802.3 10BASE-T / 802.3u 100BASE-TX
    Management Type:
    Unmanaged
    Compatible With:
    GarrettCom Magnum CompactPCI chassis
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Card only; no chassis included. 12 RJ-45 ports, 6U rear I/O slot.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    GarrettCom DS12-CPCI 12-Port cPCI Hub Card. Inspected and in good condition. Normal handling wear; all 12 RJ-45 ports intact, PCB clean, no visible damage. Card only — no chassis included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Znyx Networks ZX4008AB-A5 8-port cPCI Ethernet hub board — front panel showing eight RJ45 ports and status LEDs Znyx Networks ZX4008AB-A5 cPCI hub board — rear/component side showing PCB layout, relay ICs, and J3/J5 cPCI edge connectors

    Znyx Networks ZX4008AB-A5 8-Port 10/100 Ethernet cPCI Hub Board 6U RJ45

    Znyx Networks

    $75.00
    Was: $150.00
    Znyx Networks ZX4008AB-A5 8-Port 10/100 Ethernet cPCI Hub Board 6U RJ45A 6U CompactPCI Ethernet hub board with eight 10/100 Mbps ports. This board connects to cPCI systems via J3 and J5 bus...
    24214
    SKU:
    24214
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Znyx
    Model:
    ZX4008AB-A5
    MPN:
    ZX4008AB-A5
    Secondary Model:
    SA0094-A5
    SKU:
    24214
    Type:
    CompactPCI Ethernet Hub Board
    Form Factor:
    6U CompactPCI (cPCI)
    Number of Ports:
    8
    Port Speed:
    10/100 Mbps
    Connector Type:
    RJ45
    Bus Interface:
    cPCI J3 and J5
    Interface Type:
    CompactPCI (cPCI)
    Adapter Connector:
    Rear Transition Module (MDI)
    Protocol:
    Ethernet 10/100 Mbps
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Board only; pulled from a working environment.
    Condition Notes:
    Znyx Networks ZX4008AB-A5 cPCI Ethernet Hub Board. Used, inspected, good condition. Pulled from a working environment where it was in use and functional. RJ45 ports and cPCI connectors intact. No visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Znyx Networks ZX4500 Carrier Class Ethernet Switch 6U cPCI module — top-side PCB view showing Motorola 8240 PPC processor and onboard ICs Znyx Networks ZX4500 cPCI Ethernet Switch Module — reverse PCB view showing label, memory ICs, and board layout

    Znyx Networks ZX4500 Carrier Class Ethernet Switch 6U cPCI 24-Port 100Mbps 2GbE

    Znyx Networks

    $200.00
    Was: $400.00
    Znyx Networks ZX4500 Carrier Class Ethernet Switch 6U cPCI 24-Port 100Mbps 2GbEThe ZX4500 is a managed Ethernet switch module designed for CompactPCI systems. It provides 24 ports of 10/100 Mbps...
    24201
    SKU:
    24201
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Znyx
    Model:
    ZX4500
    MPN:
    ZX4500
    Type:
    Carrier Class Ethernet Switch Module
    SKU:
    24201
    Form Factor:
    6U CompactPCI (cPCI) Module
    Number of Ports:
    24x 10/100 Ethernet + 2x Gigabit Ethernet
    Port Speed:
    10/100 Mbps (24 ports); 1000 Mbps / 1 GbE (2 ports)
    Gigabit Uplink Ports:
    2x 1000FX Gigabit Ethernet (fiber, LC connectors)
    Bus Interface:
    CompactPCI (cPCI) — J1, J2, J3, J4, J5 connections
    Processor:
    Embedded Motorola 8240 PowerPC (PPC)
    Expansion:
    PMC/PPMC slot with RS-232 Serial Port
    Serial Interface:
    RS-232 (via PMC/PPMC)
    Gigabit Interface Type:
    1000FX — fiber optic, LC duplex connectors
    Front Panel Indicators:
    CLK, PWR, RTM, OK, EXT FLT, INT FLT, HOT SWAP LEDs; RESET
    Hot Swap:
    Yes — Hot Swap supported (front panel indicator)
    Standards:
    CompactPCI / cPCI (PICMG 2.x)
    Management Type:
    Managed
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Module only. Pulled from a working cPCI system. No accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Znyx Networks ZX4500 cPCI Ethernet Switch Module inspected and in good used condition. Pulled from a working cPCI system. Board and connectors appear intact with normal wear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Linksys BEFSR41 V3 EtherFast Cable/DSL Router – front and top angled view showing Linksys branding and status LEDs Linksys BEFSR41 V3 EtherFast Router – rear panel showing 1 WAN port, 4 LAN ports, reset button, and DC power jack

    Linksys BEFSR41 V3 EtherFast Cable/DSL Router 4-Port Switch No AC Adapter

    Linksys

    $12.00
    Was: $25.00
    Linksys BEFSR41 V3 EtherFast Cable/DSL Router 4-Port Switch No AC AdapterThe Linksys BEFSR41 V3 is an EtherFast Cable/DSL wired broadband router with a built-in 4-port 10/100 Mbps switch. Designed...
    23616
    SKU:
    23616
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Linksys
    Model:
    BEFSR41
    MPN:
    BEFSR41
    Type:
    Wired Broadband Router
    SKU:
    23616
    Version:
    V3
    Number of Ports:
    4-Port LAN + 1 WAN
    LAN Port Speed:
    10/100 Mbps
    WAN Port Speed:
    10/100 Mbps
    WAN Connection Type:
    Cable / DSL
    Switching:
    Built-in 4-Port 10/100 Switch
    Form Factor:
    Desktop
    Routing Protocol:
    NAT
    Network Standard:
    IEEE 802.3, IEEE 802.3u
    Connector Type:
    RJ-45
    Management Type:
    Unmanaged (Web UI)
    Country/Region of Manufacture:
    China
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    No AC adapter included. Unit only.
    Condition Notes:
    Linksys BEFSR41 V3 EtherFast Cable/DSL Router in good used condition. Pulled from a working environment. No AC adapter included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.00
    Was: $25.00
  • IBM 96F9156 Multiprotocol ISA Board – top component side view showing full PCB with memory chips and DB25 connector bracket IBM 96F9156 Multiprotocol ISA Board – side profile view showing full card length, ISA edge connector, and blue retention brackets

    IBM 96F9156 Multiprotocol Board ISA Card FRU AS/400 PS/2 Serial Communications

    IBM

    $30.00
    Was: $60.00
    IBM 96F9156 Multiprotocol Board ISA Card FRU AS/400 PS/2 Serial CommunicationsThis is an IBM multiprotocol communications adapter card designed for serial data transmission. The ISA card connects to...
    23582
    SKU:
    23582
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    IBM
    Model:
    96F9156
    MPN:
    96F9156
    Type:
    Multiprotocol Communications Adapter Card
    SKU:
    23582
    FRU Part Number:
    96F9156
    FCC ID:
    ANO9SA6450348
    Form Factor:
    ISA Card
    Bus Interface:
    ISA
    Connector Type:
    DB25 (25-pin D-sub)
    Compatible With:
    IBM AS/400, IBM PS/2, IBM PC Systems
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    IBM FRU P/N 96F9156 multiprotocol ISA board only; no cables or accessories included.
    Condition Notes:
    IBM 96F9156 Multiprotocol ISA Board inspected and in good used condition. PCB is clean, DB25 and ISA edge connectors appear intact. Light surface wear only. No cables included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $30.00
    Was: $60.00
  • Hubbell FPL13VD1D2 face plate label showing model number and lot number 3494 on packaging Hubbell FPL13VD1D2 wall plate face showing three labeled keystone openings: Voice, Data 1, Data 2

    Hubbell FPL13VD1D2 3-Port Keystone Wall Plate Voice Data Label Fields IFP

    Hubbell

    $10.00
    Was: $20.00
    Hubbell FPL13VD1D2 3-Port Keystone Wall Plate Voice Data Label Fields IFPThe Hubbell FPL13VD1D2 is a single-gang keystone wall plate with three port openings and pre-printed label fields for one...
    23225
    SKU:
    23225
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Hubbell
    Model:
    FPL13VD1D2
    MPN:
    FPL13VD1D2
    Type:
    Keystone Wall Plate / Face Plate
    SKU:
    23225
    Number of Ports:
    3
    Port Configuration:
    1 Voice, 2 Data (Data 1, Data 2)
    Jack Type:
    Keystone
    Label Fields:
    Yes – pre-printed Voice, Data 1, Data 2
    Color:
    Ivory / White
    Mounting Type:
    Wall Mount
    Compatible With:
    Hubbell IFP keystone inserts
    Seller Notes:
    New in original packaging; includes face plate only, no keystone inserts
    Country/Region of Manufacture:
    United States
    Condition:
    New – Open Box / New Old Stock
    Condition Notes:
    Hubbell FPL13VD1D2 3-port keystone wall plate. New and unused; appears in original bag. May be new old stock — outer retail packaging may be missing. Plate itself shows no use or wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $10.00
    Was: $20.00
  • Avaya BI02E1 4-pin patch panel rack enclosure – top-front angled view showing black sheet-metal housing with ventilation slots and rack ears Avaya BI02E1 patch module rack enclosure – rear-top angled view showing back panel ventilation slots and rack mounting hardware

    Avaya BI02E1 4-Pin Patch Panel Modules Telecom Cross-Connect 19" Rack Mount Lot

    Avaya

    $60.00
    Was: $125.00
    Avaya BI02E1 4-Pin Patch Panel Modules Telecom Cross-Connect 19" Rack Mount Lot 4This listing includes four Avaya BI02E1 4-pin patch panel modules installed in a 19-inch rackmount cross-connect...
    23198
    SKU:
    23198
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    20.00 LBS
    Brand:
    Avaya
    Model:
    BI02E1
    MPN:
    BI02E1
    SKU:
    23198
    Type:
    Telecom Patch Panel Module / Cross-Connect Rack
    Number of Modules:
    4
    Connector Type:
    4-Pin Patch
    Form Factor:
    19" Rackmount Enclosure
    Compatible With:
    Avaya telecom cross-connect systems
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes four Avaya BI02E1 4-pin patch panel modules installed in 19" rack enclosure
    Condition Notes:
    Four Avaya BI02E1 4-pin patch panel modules in 19" rack enclosure. Inspected and in good used condition; pulled from a working telecom environment. Normal cosmetic wear. All four modules present and appear complete.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • SMC Networks SMC2635W EZ Connect 2.4GHz 11Mbps Wireless CardBus Adapter — front label view showing model number and EZ Connect branding SMC Networks SMC2635W — rear label showing FCC ID HEDWN3304B17, IC ID, CE 0560 mark, and regulatory compliance text

    SMC Networks SMC2635W EZ Connect Wireless CardBus Adapter 2.4GHz 802.11b 11Mbps

    SMC Networks

    $15.00
    Was: $30.00
    SMC Networks SMC2635W EZ Connect Wireless CardBus Adapter 2.4GHz 802.11b 11MbpsCardBus wireless adapter for legacy laptops with PCMCIA slots. Connects to 802.11b networks at 2.4 GHz with maximum data...
    23186
    SKU:
    23186
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC Networks
    Model:
    SMC2635W
    MPN:
    SMC2635W
    Type:
    Wireless CardBus Adapter
    SKU:
    23186
    Wireless Standard:
    IEEE 802.11b
    Frequency Band:
    2.4 GHz
    Maximum Data Transfer Rate:
    11 Mbps
    Form Factor:
    CardBus (PCMCIA)
    Interface:
    CardBus
    FCC ID:
    HEDWN3304B17
    IC ID:
    3857A-WN330417
    Certifications:
    FCC, CE, IC Canada RSS-210, IDA Singapore
    Compatible With:
    Laptops with CardBus (32-bit PCMCIA) slot
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Adapter only; pulled from a working environment
    Country/Region of Manufacture:
    Korea
    Condition Notes:
    SMC Networks SMC2635W EZ Connect Wireless CardBus Adapter. Inspected and in good condition — pulled from a working environment where it was in use and functional. CardBus connector and antenna appear clean.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $15.00
    Was: $30.00
  • Madge Smart 16/4 AT Ringnode 152-048-06 Token Ring ISA Card – top component side showing main controller ICs and ISA edge connector Madge Smart 16/4 AT Ringnode 152-048-06 – solder side of PCB showing board traces and bracket with RJ-45 and DB-9 ports

    Madge Smart 16/4 AT Ringnode 152-048-06 Token Ring Network Card 16-Bit ISA

    Madge

    $25.00
    Was: $50.00
    Madge Smart 16/4 AT Ringnode 152-048-06 Token Ring Network Card 16-Bit ISAThe Madge Smart 16/4 AT Ringnode is a 16-bit ISA Token Ring network adapter designed for IBM PC/AT-compatible computers. It...
    22985
    SKU:
    22985
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Madge
    Model:
    Smart 16/4 AT Ringnode
    MPN:
    152-048-06
    Type:
    Token Ring Network Adapter Card
    SKU:
    22985
    Bus Type:
    ISA (16-bit)
    Network Protocol:
    Token Ring
    Data Rate:
    4/16 Mbps
    Connector Type:
    RJ-45 (UTP), DB-9 (STP)
    Form Factor:
    Half-Length ISA Card
    Compatible With:
    IBM PC/AT and compatible systems with 16-bit ISA slot
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; pulled from a working environment.
    Country/Region of Manufacture:
    United Kingdom
    Condition Notes:
    Madge Smart 16/4 AT Ringnode 152-048-06 Token Ring ISA card in good used condition. Pulled from a working environment where it was in active use. PCB and connectors appear intact with typical light wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • Ascend Communications MBV-BRI4U Multiband VSX router – front left three-quarter view showing front panel LEDs and power indicator Ascend Multiband VSX logo closeup on front panel of MBV-BRI4U router

    Ascend Communications MBV-BRI4U Multiband VSX ISDN NX Router RS366 V25bis X21

    Ascend Communications

    $85.00
    Was: $175.00
    Ascend Communications MBV-BRI4U Multiband VSX ISDN NX Router RS366 V25bis X21ISDN BRI inverse multiplexer and WAN router designed for aggregating multiple ISDN BRI connections. Supports inverse...
    22946
    SKU:
    22946
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Ascend
    Model:
    MBV-BRI4U
    Secondary Model:
    MBV-BRI4S-J
    MPN:
    MBV-BRI4U
    Part Number:
    0700-0050-003
    Hardware Revision:
    Rev F
    SKU:
    22946
    Type:
    ISDN BRI Inverse Multiplexer / WAN Router
    Condition:
    Used – Pulled from Working Environment
    Options Installed:
    ISDN NX, RS366, V25bis, X21
    Interface Type:
    ISDN BRI, RS366, V25bis, X21
    Form Factor:
    Desktop
    Number of Ports:
    4 BRI WAN ports (visible rear), plus NET and serial ports
    Management Type:
    Managed
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; pulled from a working environment. No accessories included.
    Condition Notes:
    Ascend MBV-BRI4U Multiband VSX ISDN NX Router. Inspected and in good used condition. Pulled from a working environment where it was in active use. Minor cosmetic wear only. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $85.00
    Was: $175.00
  • Belkin F5D5000 PCI Ethernet network card – top component side showing MPX controller chip, RJ45 port, and PCI edge connector Belkin F5D5000 PCI NIC – rear bracket and solder side view showing RJ45 port and CE/FCC compliance markings

    Belkin F5D5000 PCI 10/100 Ethernet Network Card RJ45 F300121102 NIC

    Belkin

    $8.00
    Was: $15.00
    Belkin F5D5000 PCI 10/100 Ethernet Network Card RJ45 F300121102 NICThe Belkin F5D5000 is a PCI Fast Ethernet network interface card (NIC) that adds a single 10/100 Mbps Ethernet port to any desktop...
    22675
    SKU:
    22675
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    Belkin
    Model:
    F5D5000
    MPN:
    F300121102
    Type:
    PCI Ethernet Network Interface Card (NIC)
    SKU:
    22675
    Network Speed:
    10/100 Mbps (10Base-T / 100Base-TX)
    Interface:
    PCI
    Number of Ports:
    1
    Connector Type:
    RJ45
    Form Factor:
    PCI Card
    Compatible With:
    Desktop PCs with PCI slot
    Certifications:
    CE, FCC
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; pulled from a working environment
    Country/Region of Manufacture:
    China
    Condition Notes:
    Belkin F5D5000 PCI 10/100 Ethernet NIC in good used condition. Pulled from a working environment where it was in use and functional. Normal light wear from prior installation.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $8.00
    Was: $15.00