Networking

Networking

  • APW Wright Line CSW18 LMS KVM Switch – front panel and top view showing black 1U rackmount chassis APW Wright Line CSW18 LMS KVM Switch – rear panel showing 8x VGA and 8x PS/2 port sets plus IEC power inlet

    APW Wright Line CSW18 LMS 8-Port KVM Switch PS/2 VGA 1U 19" Rackmount

    APW

    $40.00
    Was: $80.00
    APW Wright Line CSW18 LMS 8-Port KVM Switch PS/2 VGA 1U 19" Rackmount8-port KVM switch for controlling multiple servers or workstations from a single PS/2 keyboard, mouse, and VGA monitor. Mounts in...
    39704
    SKU:
    39704
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    APW Wright Line
    Model:
    CSW18
    MPN:
    CSW18
    Type:
    KVM Switch
    SKU:
    39704
    Number of Ports:
    8
    Video Interface:
    VGA (HD-15)
    Keyboard/Mouse Interface:
    PS/2
    Form Factor:
    1U 19" Rackmount
    Power Requirements:
    100-240V AC, 50-60Hz, 1.0A Max
    Certifications:
    FCC, UL, VCI, TUV/GS, CE
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    I/O controller cables are NOT included. Unit only.
    Compatible With:
    PS/2 keyboards, PS/2 mice, VGA monitors, servers
    Part Number:
    106-1772-00
    Condition Notes:
    APW Wright Line CSW18 LMS 8-Port KVM Switch. Inspected and in good used condition. Minor surface wear typical of rack use. All rear ports appear intact. I/O controller cables not included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • Allied Telesyn CentreCOM FS716E 16-port Fast Ethernet switch — front panel view showing RJ45 ports and status LEDs Allied Telesyn CentreCOM FS716E — rear/bottom view showing fan exhaust and DC power connector

    Allied Telesyn CentreCOM FS716E 16-Port 10/100 Fast Ethernet Switch RJ45

    Allied Telesyn

    $20.00
    Was: $40.00
    Allied Telesyn CentreCOM FS716E 16-Port 10/100 Fast Ethernet Switch RJ45Unmanaged Fast Ethernet switch with 16 RJ45 ports operating at 10/100 Mbps. Routes data between connected devices on a local...
    39557
    SKU:
    39557
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Allied Telesyn
    Model:
    FS716E
    MPN:
    CentreCOM FS716E
    Type:
    Fast Ethernet Switch
    SKU:
    39557
    Number of Ports:
    16
    Port Speed:
    10/100 Mbps (10BASE-T / 100BASE-TX)
    Connector Type:
    RJ45
    Management Type:
    Unmanaged
    Power Requirements:
    5V DC, 4A Max
    Standards:
    IEEE 802.3, IEEE 802.3u
    Form Factor:
    Desktop / Rackmountable
    Per-Port LEDs:
    POWER, LINK/ACT, 100M, FDX per port
    Cooling:
    Internal fan
    Country/Region of Manufacture:
    Taiwan
    Certifications:
    FCC Class B, CE, CSA, CISPR 22 Class B
    Condition:
    Used – Inspected and in good condition
    Seller Notes:
    Unit only — no power adapter included. Please confirm power supply compatibility before ordering.
    Condition Notes:
    Allied Telesyn CentreCOM FS716E 16-Port Fast Ethernet Switch. Inspected, good condition. Light surface wear. All 16 RJ45 ports intact. No power adapter included — requires 5V DC 4A supply.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • HP J2602A AdvanceStack ThinLAN Hub – right-angle front and side view showing four DB-44 segment port connectors and top LED indicator strip HP J2602A AdvanceStack left-side panel detail showing ThinLAN BNC port, Extension RJ-45 in/out, RS-232 DB-9 out-of-band management port, station address label, and LED indicators

    HP J2602A AdvanceStack 4-Port ThinLAN Hub RS-232 Out-of-Band Mgmt AUI 10Base2

    HP

    $35.00
    Was: $70.00
    HP J2602A AdvanceStack 4-Port ThinLAN Hub RS-232 Out-of-Band Mgmt AUI 10Base2A 4-port ThinLAN concentrator designed for 10Base2 Ethernet networks. This hub connects ThinLAN segments via BNC...
    39532
    SKU:
    39532
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    13.00 LBS
    Brand:
    HP
    Model:
    J2602A
    MPN:
    J2602A
    Type:
    Ethernet Hub / ThinLAN Concentrator
    SKU:
    39532
    Number of Ports:
    4 (ThinLAN/10Base2 segment ports)
    Interface Type:
    ThinLAN (10Base2 / BNC), AUI/Xcvr
    Management Type:
    Out-of-Band Management via RS-232
    Connector Type:
    BNC (ThinLAN), DB-9 RS-232, AUI, RJ-45 (Extension)
    Network Technology:
    Ethernet 10Base2 (ThinLAN)
    Expansion Slot:
    HP AdvanceSlot (1 slot, module bay)
    Power Requirements:
    100-127V / 200-240V AC, 50/60Hz, 0.8A
    Form Factor:
    Desktop / Rackmount
    Country/Region of Manufacture:
    USA
    Label Part Number:
    5182-1718
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; no additional cables or modules included.
    Compatible With:
    HP AdvanceStack networking systems
    LED Indicators:
    Power, Fault, ThinLAN, AdvSlot, Console, AUI/Xcvr, Security, Activity, Collision
    Condition Notes:
    HP J2602A AdvanceStack 4-Port ThinLAN Hub inspected and in good condition. Chassis is clean with normal light wear. All ports appear intact. HP AdvanceSlot bay cover in place.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Cybex Commander 4XP AutoBoot KVM Switch front panel showing channel status LEDs and AutoBoot Commander 4XP logo Cybex Commander 4XP front panel close-up showing SELECTED and ON-LINE LED indicators for channels A through D

    Cybex Commander 4XP AutoBoot KVM Switch 520-124 w/ XPAC 600-170 XPDU 283-002

    Cybex

    $85.00
    Was: $175.00
    Cybex Commander 4XP AutoBoot KVM Switch 520-124 w/ XPAC 600-170 XPDU 283-002Rack-mount KVM switch designed to manage multiple servers and systems from a single console. Supports 14 channels with...
    39520
    SKU:
    39520
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    25.00 LBS
    Brand:
    Cybex
    Model:
    Commander 4XP
    MPN:
    520-124
    Secondary Model:
    4XP CMDR Rear Access
    Type:
    AutoBoot KVM Switch
    SKU:
    39520
    Included Modules:
    XPAC 600-170 (x8), XPDU 283-002 (x1)
    Number of Slots:
    14
    Number of Ports (Channels):
    14 (A–N)
    Form Factor:
    Rack Mount
    Power Requirements:
    100–240V AC, 50/60 Hz, 3.2A
    Management Type:
    AutoBoot / Automatic Switching
    Status Indicators:
    Per-channel Selected (amber) and On-Line (green) LEDs; Fail and Power LEDs
    Connector Type:
    High-Density DB (SCSI-style) per module
    Certifications:
    CE, ETL, CSA C22.2 No. 950, FCC Part 15, EN 60950, ANSI/UL 1950
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes XPAC 600-170 modules and one XPDU 283-002 module installed in chassis
    Condition Notes:
    Cybex Commander 4XP AutoBoot KVM Switch, used, pulled from a working environment. Inspected and in good condition with normal wear. All XPAC 600-170 and XPDU 283-002 modules present and installed.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $85.00
    Was: $175.00
  • HP Hewlett-Packard 28688B EtherTwist Hub Plus – top and right-side view showing beige desktop enclosure with ventilation slots HP 28688B EtherTwist Hub Plus – rear panel angled view showing Console Port RS-232, ThinLAN connector, AUI port, and fan exhaust

    HP Hewlett-Packard 28688B EtherTwist Hub Plus 12-Port 10Base-T AUI RS-232

    HP

    $65.00
    Was: $125.00
    HP Hewlett-Packard 28688B EtherTwist Hub Plus 12-Port 10Base-T AUI RS-232A 12-port Ethernet hub from the 1990s that consolidates 10Base-T twisted-pair connections alongside AUI and 10Base2 (ThinLAN)...
    39514
    SKU:
    39514
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    HP
    Model:
    28688B
    MPN:
    28688B
    Assembly Number:
    28688-60011
    SKU:
    39514
    Type:
    Ethernet Hub
    Number of Ports:
    12 Twisted-Pair (10Base-T) + AUI + ThinLAN
    Port Speed:
    10 Mbps
    Networking Standard:
    10Base-T, 10Base2 (ThinLAN), AUI
    Console Interface:
    RS-232
    Connector Types:
    Twisted-Pair, AUI, ThinLAN (BNC), RS-232 DB25
    Management Type:
    Managed (RS-232 console port)
    Form Factor:
    Desktop / Rackmountable
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; no cables or accessories confirmed included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    HP 28688B EtherTwist Hub Plus inspected and in good used condition. Light surface scuffing and age-related discoloration; connectors and fan intact, no physical damage noted.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Corporate Computer Systems CCS Micro 56+ 601556 rackmount DSU/CSU – front panel three-quarter view showing unit in 1U rack chassis CCS Micro 56+ front panel close-up showing Audio HF Boost switch, Loopback switch, Input/Overload LED, and Receiver Framed LED

    CCS Micro 56+ 601556 V.35 Audio HF Boost Rackmount DSU/CSU 85-265VAC 50/60Hz

    Corporate Computer Systems

    $55.00
    Was: $100.00
    CCS Micro 56+ 601556 V.35 Audio HF Boost Rackmount DSU/CSU 85-265VAC 50/60HzThe Corporate Computer Systems CCS Micro 56+ is a 1U rackmount DSU/CSU (Data Service Unit/Channel Service Unit) designed...
    39368
    SKU:
    39368
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Corporate Computer Systems
    Model:
    CCS Micro 56+
    MPN:
    601556
    Secondary Model:
    CCS0895
    SKU:
    39368
    Type:
    DSU/CSU (Data Service Unit)
    Interface Type:
    V.35
    Connector Types:
    V.35 (34-pin), XLR Audio Input, XLR Audio Output, Alarm
    Form Factor:
    1U Rackmount
    Power Requirements:
    85-265VAC, 50/60Hz
    Front Panel Controls:
    Audio HF Boost (On/Off), Loopback (LB/Norm)
    Front Panel Indicators:
    Input/Overload LED, Receiver Framed LED, Power LED
    Audio Features:
    Audio HF Boost, XLR Audio Input, XLR Audio Output
    Loopback Testing:
    Yes — front panel Loopback switch (LB/Norm)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no cables included. Pulled from a working environment.
    Country/Region of Manufacture:
    United States
    Compatible With:
    Standard V.35 WAN routers, multiplexers, and CSU/DSU systems
    Condition Notes:
    Corporate Computer Systems CCS Micro 56+ 601556 V.35 DSU/CSU. Inspected, in good used condition. Pulled from a working environment where it was in use and functional. Light cosmetic rack wear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • Dynetcom Dyna-Patch Mark-1 153-004B-16 16-channel patching module — front panel angled view showing single-hole monitoring ports and COMP label Dynetcom Dyna-Patch Mark-1 153-004B-16 — rear view showing 16 DB25 connectors labeled COMP across full width

    Dynetcom 153-004B-16 Dyna-Patch Mark-1 16-Channel Patching Module 12 CKT

    Dynetcom

    $75.00
    Was: $150.00
    Dynetcom 153-004B-16 Dyna-Patch Mark-1 16-Channel Patching Module 12 CKTA 16-channel rackmount patching module designed for test circuit access and monitoring of modem, computer port, and data...
    39342
    SKU:
    39342
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Dynetcom
    Model:
    153-004B-16
    MPN:
    153-004B-16
    Secondary Model:
    Dyna-Patch Mark-1
    Type:
    16-Channel Rackmount Patching Module
    SKU:
    39342
    Number of Channels:
    16
    Number of Circuits:
    12
    Connector Type:
    DB25 (25-pin D-Sub)
    Form Factor:
    Rack Mount
    Rack Units:
    2U
    Interface Type:
    DB25 single-hole monitoring ports
    Application:
    Modem, computer port, and data test circuit access
    Management Type:
    Passive / Monitoring
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from working environment where it was in active use.
    Condition Notes:
    Dynetcom Dyna-Patch Mark-1 153-004B-16 patching module inspected and in good used condition. Pulled from a working environment where it was in active use and functional. DB25 connectors intact. Normal light wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Intel WM3945ABG PRO/Wireless 3945ABG Mini PCI-E card — top side showing regulatory certification labels including NTC, ICES/NMB-003, and IDA markings Intel WM3945ABG PRO/Wireless 3945ABG Mini PCI-E card — underside label showing model WM3945ABG MOW1, FCC ID PD9WM3945ABG, Intel PRO/Wireless 3945ABG Network Connection, Made in China

    Intel WM3945ABG PRO/Wireless 3945ABG Mini PCI-E Card 802.11a/b/g Sony NR

    Intel

    $8.00
    Was: $15.00
    Intel WM3945ABG PRO/Wireless 3945ABG Mini PCI-E Card 802.11a/b/g Sony NRMini PCI-E wireless network adapter for laptops and portable computing devices. Provides 802.11a/b/g connectivity via Mini PCI...
    39315
    SKU:
    39315
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Intel
    Model:
    WM3945ABG
    MPN:
    WM3945ABG MOW1
    Type:
    Mini PCI-E Wireless Network Adapter
    SKU:
    39315
    Wireless Standard:
    IEEE 802.11a, 802.11b, 802.11g
    Interface:
    Mini PCI Express (Mini PCI-E)
    Form Factor:
    Mini PCI-E Card
    FCC ID:
    PD9WM3945ABG
    IC:
    1000M-3945ABG
    Compatible With:
    Sony NR Series Notebook
    Country/Region of Manufacture:
    China
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; pulled from a Sony NR series notebook. No cables or accessories.
    Condition Notes:
    Intel WM3945ABG PRO/Wireless 3945ABG Mini PCI-E card. Pulled from a working Sony NR series notebook. Inspected and in good condition. Clean connector edge, normal light wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $8.00
    Was: $15.00
  • MICOM Marathon 1K 5001B/D Network Feeder Multiplexer — front panel view showing MICOM and Marathon 1K branding and ventilation grille MICOM Marathon 1K 5001B/D Network Feeder Multiplexer — rear panel showing six DB25 connectors, IEC power inlet, and cooling fan

    MICOM Marathon 1K 5001B/D Network Feeder Multiplexer 100-240V 50-60Hz

    MICOM

    $150.00
    Was: $300.00
    MICOM Marathon 1K 5001B/D Network Feeder Multiplexer 100-240V 50-60HzThe MICOM Marathon 1K 5001B/D is a standalone network feeder multiplexer designed to aggregate and distribute data traffic across...
    38898
    SKU:
    38898
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    21.00 LBS
    Brand:
    Micom
    Model:
    5001B/D
    MPN:
    150-2302-001
    Secondary Model:
    Marathon 1K
    Hardware Revision:
    Rev. J
    Type:
    Network Feeder Multiplexer
    SKU:
    38898
    Condition:
    Used – Pulled from Working Environment
    Power Requirements:
    100-240V AC, 50-60Hz, 3/1.5A
    Voltage:
    100-240V AC
    Amperage:
    3/1.5A
    Frequency:
    50-60Hz
    Form Factor:
    Desktop
    Interface Type:
    DB25 (multiple ports)
    Number of Ports:
    6 (DB25 connectors visible on rear/bottom)
    FCC Compliance:
    FCC Part 15
    Seller Notes:
    Unit only — no accessories. Pulled from a working environment.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    MICOM Marathon 1K 5001B/D Network Feeder Multiplexer. Inspected and in good used condition. Pulled from a working environment where it was in active use. Light surface wear only. DB25 ports and IEC inlet intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Cisco MN-4T Four-Port Serial Network Module — angled top view showing PCB, main processor chip, and four DB-60 serial port faceplate Cisco MN-4T Four-Port Serial Network Module — PCB reverse/underside view showing main ASIC, support ICs, and edge connector

    Cisco MN-4T Four-Port Serial Network Module NM-4T WAN Router Card

    Cisco Systems

    $25.00
    Was: $50.00
    Cisco MN-4T Four-Port Serial Network Module NM-4T WAN Router CardThis is a four-port serial WAN network module designed for Cisco modular routers. It provides DB-60 Smart Serial connectivity for...
    37170
    SKU:
    37170
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cisco
    Model:
    MN-4T
    MPN:
    MN-4T
    Secondary Model:
    NM-4T
    Type:
    Four-Port Serial WAN Network Module
    SKU:
    37170
    Number of Ports:
    4
    Port Type:
    DB-60 Serial (Smart Serial)
    Interface Type:
    Serial WAN
    Compatible With 1:
    Cisco 2600 Series Routers
    Compatible With 2:
    Cisco 3600 Series Routers
    Compatible With 3:
    Cisco 3700 Series Routers
    Form Factor:
    Network Module / Card
    Supported Protocols:
    Frame Relay, PPP, HDLC, X.25
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Module only; no cables or accessories included.
    Country/Region of Manufacture:
    Taiwan
    Condition Notes:
    Cisco MN-4T Four-Port Serial Network Module. Inspected and in good condition. Board and faceplate show normal wear from prior use. All 4 DB-60 serial ports intact. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • Cisco WIC-1DSU-T1 T1 DSU/CSU WAN Interface Card — angled top view showing PCB, yellow capacitors, main controller IC, and faceplate with RJ-48C port and LP/AL/CD LEDs Cisco WIC-1DSU-T1 WAN Interface Card — reverse angled view showing PCB underside with main controller chip labeled KOREA, yellow transformers, and WIC edge connector

    Cisco WIC-1DSU-T1 T1 DSU/CSU WAN Interface Card 1.544 Mbps RJ-48C 1700 2600 3600

    Cisco Systems

    $20.00
    Was: $40.00
    Cisco WIC-1DSU-T1 T1 DSU/CSU WAN Interface Card 1.544 Mbps RJ-48C 1700 2600 3600The Cisco WIC-1DSU-T1 is a T1 DSU/CSU WAN Interface Card designed for Cisco modular routers. It terminates and manages...
    37163
    SKU:
    37163
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cisco
    Model:
    WIC-1DSU-T1
    MPN:
    WIC-1DSU-T1
    Type:
    T1 DSU/CSU WAN Interface Card
    SKU:
    37163
    Interface Type:
    T1 / Fractional T1
    Data Rate:
    1.544 Mbps
    Connector Type:
    RJ-48C
    Form Factor:
    WIC Module / Card
    Compatible With 1:
    Cisco 1700 Series Routers
    Compatible With 2:
    Cisco 2600 Series Routers
    Compatible With 3:
    Cisco 3600 Series Routers
    Protocol:
    T1 ESF, D4 / SF
    Standards Compliance:
    ANSI T1.403
    Number of Ports:
    1
    Management Type:
    Managed
    Country/Region of Manufacture:
    Korea
    Seller Notes:
    Card only. No accessories included.
    Condition Notes:
    Cisco WIC-1DSU-T1 T1 DSU/CSU WAN Interface Card. Inspected and in good used condition. Faceplate and PCB are clean; RJ-48C port and LEDs intact. Light handling wear. Card only, no accessories. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Cisco WIC-1B-U ISDN BRI U WAN Interface Card 800-01834 – angled top view showing PCB components and front bracket Cisco WIC-1B-U ISDN BRI U WAN Interface Card – reverse PCB view showing power components, transformer, and edge connector

    Cisco WIC-1B-U ISDN BRI U WAN Interface Card 800-01834 73-7542-01 Router

    Cisco Systems

    $20.00
    Was: $50.00
    Cisco WIC-1B-U ISDN BRI U WAN Interface Card 800-01834 73-7542-01 RouterThis is an ISDN BRI U WAN Interface Card (WIC) module for Cisco routers. It provides a single ISDN BRI U interface with...
    37158
    SKU:
    37158
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Cisco
    Model:
    WIC-1B-U
    MPN:
    800-01834
    Secondary Model:
    73-7542-01
    SKU:
    37158
    Type:
    ISDN BRI U WAN Interface Card (WIC)
    Interface Type:
    ISDN BRI U (NT1 built-in)
    Number of Ports:
    1 x RJ-45 ISDN BRI U port
    Connector Type:
    RJ-45
    Compatible With:
    Cisco 1700, 2600, 2600XM, 3600, 3700 series routers
    Form Factor:
    WIC (WAN Interface Card) module
    Protocol:
    ISDN BRI
    NT1 Included:
    Yes — built-in NT1 (U interface)
    ISDN Channels:
    2B+1D (2 Bearer channels + 1 Data channel)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; no cables or documentation included
    Country/Region of Manufacture:
    Taiwan
    Condition Notes:
    Cisco WIC-1B-U ISDN BRI U WAN Interface Card (800-01834) pulled from a working environment and inspected. PCB is clean, RJ-45 port intact, bracket present. Good used condition. Card only — no cables included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $50.00
  • Cisco WIC-1DSU-56K4 WAN Interface Card – angled top view showing PCB components and front faceplate with RJ-48 port Cisco WIC-1DSU-56K4 – reverse side of PCB showing edge connector, transformer modules, and Cisco-labeled ICs

    Cisco WIC-1DSU-56K4 WAN Interface Card 56/64K DSU/CSU 74-0573-05 Series 2600

    Cisco

    $18.00
    Was: $40.00
    Cisco WIC-1DSU-56K4 WAN Interface Card 56/64K DSU/CSU 74-0573-05 Series 2600A WAN interface card for Cisco routers that provides 56/64 Kbps DSU/CSU connectivity. This module installs into compatible...
    37157
    SKU:
    37157
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    Cisco
    Model:
    WIC-1DSU-56K4
    MPN:
    74-0573-05
    Type:
    WAN Interface Card (WIC)
    SKU:
    37157
    Interface Type:
    56/64K DSU/CSU
    Data Rate:
    56 Kbps / 64 Kbps
    Connector Type:
    RJ-48 (single port, front panel)
    Compatible With 1:
    Cisco 2600 Series Routers
    Compatible With 2:
    Cisco 2610, 2611, 2620, 2621, 2650, 2651
    Compatible With 3:
    Cisco 1700, 2800, 3700 Series (select models)
    Form Factor:
    WIC Module / Card
    Number of Ports:
    1
    Management Type:
    Managed
    LED Indicators:
    TD, RD, LP, AL, CD
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Card only; no cables or accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Cisco WIC-1DSU-56K4 56/64K DSU/CSU WAN Interface Card. Inspected and in good condition. Normal light wear from prior use. Faceplate and RJ-48 port intact. PCB shows no visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $18.00
    Was: $40.00
  • Cisco 7200 Series VXR 7204VXR rackmount router chassis front-left angle view showing module bays and rack ears Cisco 7204VXR front panel close-up showing Fast Ethernet I/O controller with DB-25 connector and RJ-45 port with LED indicators

    Cisco 7204VXR Router Chassis w/ NPE Fast Ethernet I/O Controller Dual PSU Rack

    Cisco Systems

    $150.00
    Was: $300.00
    Cisco 7204VXR Router Chassis w/ NPE Fast Ethernet I/O Controller Dual PSU RackThe Cisco 7204VXR is a 4-slot, 3U rackmount chassis from the Cisco 7200 Series VXR platform — a high-performance modular...
    37156
    SKU:
    37156
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    50.00 LBS
    Brand:
    Cisco
    Model:
    7204VXR
    MPN:
    7204VXR
    Secondary Model:
    Cisco 7200 Series VXR
    Type:
    Rackmount Enterprise Router Chassis
    SKU:
    37156
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes Fast Ethernet I/O Controller, NPE module, and 2x Cisco 34-0687-01 power supplies
    Country/Region of Manufacture:
    United States
    Form Factor:
    Rack Mount
    Rack Size:
    19 inch, 3U
    Number of Slots:
    4
    Power Supply MPN:
    34-0687-01 Rev G0
    Number of Power Supplies:
    2 (Dual Redundant)
    Power Requirements:
    100–240V AC, 5A, 50/60Hz
    I/O Controller:
    Fast Ethernet Input/Output Controller
    Interface Type:
    Fast Ethernet, AUX, Console
    Console Port:
    DB-25 Serial (Console)
    AUX Port:
    DB-25 Serial (AUX)
    Management Type:
    Managed
    Compatible With:
    Cisco 7200 Series VXR: 7204VXR, 7206VXR
    Platform:
    Cisco IOS
    Network Processing Engine:
    NPE module installed (model not fully legible)
    Condition Notes:
    Cisco 7204VXR router chassis pulled from a working environment. Inspected and in good used condition with normal cosmetic wear. Includes Fast Ethernet I/O Controller, NPE module, and 2x Cisco 34-0687-01 power supplies.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Tektronix 671-4128 Phaser Share Ethernet Card – angled top view showing PCB components and faceplate with BNC and RJ-45 ports Tektronix 671-4128 Phaser Share Ethernet Card – reverse angled top view showing Xilinx and other ICs and edge connector

    Tektronix 671-4128 Phaser Share Ethernet Card 10Base2 10Base-T Network Module

    Tektronix

    $25.00
    Was: $50.00
    Tektronix 671-4128 Phaser Share Ethernet Card 10Base2 10Base-T Network ModuleNetwork interface card designed for Tektronix Phaser Series color printers. Provides 10 Mbps Ethernet connectivity via...
    36640
    SKU:
    36640
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Tektronix
    Model:
    671-4128
    MPN:
    671-4128
    Type:
    Ethernet Network Interface Card / Module
    SKU:
    36640
    Compatible With:
    Tektronix Phaser Series Color Printers
    Interface Type:
    10Base2 (BNC), 10Base-T (RJ-45)
    Data Rate:
    10 Mbps
    Connector Type 1:
    BNC (10Base2)
    Connector Type 2:
    RJ-45 (10Base-T)
    Form Factor:
    Card / Module
    Network Standard:
    Ethernet 10Base2, 10Base-T
    LED Indicators:
    TX, RX, Link
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; no accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Tektronix 671-4128 Phaser Share Ethernet Card inspected and in good used condition. Pulled from a working environment. BNC and RJ-45 ports appear intact. Normal handling wear on PCB.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • Belkin F5D6130 Wireless Access Point 802.11b with original retail box, power supply, and driver CD laid out Belkin F5D6130 wireless access point front view showing dual antennas, Belkin logo, and three status indicator LEDs

    Belkin F5D6130 Wireless Access Point 802.11b 11Mbps w/ Power Supply & CD

    Belkin

    $10.00
    Was: $20.00
    Belkin F5D6130 Wireless Access Point 802.11b 11Mbps w/ Power Supply & CD802.11b wireless access point providing network connectivity at 11 Mbps over 2.4 GHz frequency. Connects to wired networks via...
    36581
    SKU:
    36581
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Belkin
    Model:
    F5D6130
    MPN:
    F5D6130
    Secondary Model:
    P73875
    SKU:
    36581
    Type:
    Wireless Network Access Point
    Wireless Standard:
    IEEE 802.11b
    Maximum Data Transfer Rate:
    11 Mbps
    Frequency Band:
    2.4 GHz
    Number of LAN Ports:
    1
    LAN Port Type:
    RJ-45 Ethernet (LAN)
    Power Requirements:
    DC 9V, 1.0A
    Power Supply Input:
    100-240V AC, 1.0A, 50-60Hz
    Power Supply Model:
    HPW-1009U C1
    Antennas:
    2x external fixed antennas
    Form Factor:
    Desktop
    Country/Region of Manufacture:
    Taiwan
    FCC ID:
    K7SF5D6130
    Canada ID:
    3823A 12011
    Compatible With:
    Windows 95, 98, 2000, Me, NT 4.0
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes power supply (HPW-1009U) and Belkin driver/installation CD (P73875)
    Condition Notes:
    Belkin F5D6130 802.11b Wireless Access Point in good used condition. Pulled from a working environment where it was in use and functional. Includes power supply and driver CD.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $10.00
    Was: $20.00
  • Cabletron 6H123-50 Smart Switch 6000 Ethernet Module – front panel angle showing four DB50 Z200 connectors, FE-100FX fiber port, and RJ-45 COM port Cabletron 6H123-50 Smart Switch 6000 Ethernet Module – top-down PCB view showing switching ICs, memory modules, and daughterboard

    Cabletron Smart Switch 6000 6H123-50 Ethernet Module FE-100FX Fiber Optic

    Cabletron Systems

    $75.00
    Was: $150.00
    Cabletron Smart Switch 6000 6H123-50 Ethernet Module FE-100FX Fiber OpticThe Cabletron Systems 6H123-50 is a chassis-based Ethernet switching module designed for the Smart Switch 6000 platform. It...
    36364
    SKU:
    36364
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    Cabletron
    Model:
    6H123-50
    MPN:
    6H123-50
    Type:
    Ethernet Switch Module
    SKU:
    36364
    Compatible With:
    Cabletron Smart Switch 6000
    Interface Type:
    100Base-FX Fiber Optic (FE-100FX)
    Number of Ports:
    4 x SCSI-style (Z200) + 1 x FE-100FX fiber + 1 x COM
    Connector Type:
    MT-RJ / SC Fiber Optic, RJ-45, DB50 (Z200)
    Form Factor:
    Card / Chassis Module
    Network Technology:
    Fast Ethernet, 100Base-FX
    Management Type:
    Managed
    Chipset:
    S3 (Sandcraft) switching ICs; Lattice CPLD
    Condition:
    Used – Inspected and in Good Condition
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Module only; no chassis included. Inspected and in good condition.
    Condition Notes:
    Cabletron 6H123-50 Smart Switch 6000 Ethernet Module. Inspected and in good used condition. Board and connectors are clean with no obvious damage. Module only, no chassis. See photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Cabletron 6H123-50 Smart Switch 6000 Ethernet Module – angled top view showing PCB, four high-density front ports, and RJ-45 port Cabletron 6H123-50 Smart Switch 6000 Ethernet Module – top-down view of full PCB showing main ICs, memory chips, and daughterboard

    Cabletron Smart Switch 6000 Ethernet Module 6H123-50 Managed Chassis Card

    Cabletron Systems

    $65.00
    Was: $125.00
    Cabletron Smart Switch 6000 Ethernet Module 6H123-50 Managed Chassis CardThis is a managed Ethernet switching module designed for installation in Cabletron Smart Switch 6000 chassis systems. The card...
    36362
    SKU:
    36362
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    Cabletron
    Model:
    6H123-50
    MPN:
    6H123-50
    Type:
    Managed Ethernet Switching Module
    SKU:
    36362
    Compatible With:
    Cabletron Smart Switch 6000 Chassis
    Form Factor:
    Chassis Module / Card
    Number of Ports:
    4 high-density (SCSI-style) + 1 RJ-45 COM
    Management Type:
    Managed
    Interface Type:
    Ethernet
    Connector Type:
    High-Density 50-pin (SCSI-style), RJ-45
    Seller Notes:
    Module only — no cables or accessories included
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Condition Notes:
    Cabletron 6H123-50 Smart Switch 6000 Ethernet Module. Inspected and in good condition. Shows normal wear from previous rack use. Board and connectors appear clean with no visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Cabletron 6E233-49 Ethernet module – top-down view showing full PCB and front faceplate with four Telco connectors Cabletron 6E233-49 Ethernet module – angled top view showing PCB daughter cards and rear connector area

    Cabletron 6E233-49 Ethernet Module for Smart Switch 6000 SS6000 6C105 Chassis

    Cabletron Systems

    $45.00
    Was: $90.00
    Cabletron 6E233-49 Ethernet Module for Smart Switch 6000 SS6000 6C105 ChassisThis is an Ethernet switching module designed for the Cabletron Smart Switch 6000 (SS6000) 6C105 chassis. The module...
    36361
    SKU:
    36361
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    Cabletron
    Model:
    6E233-49
    MPN:
    6E233-49
    Type:
    Ethernet Switching Module
    SKU:
    36361
    Compatible With:
    Cabletron Smart Switch 6000 (SS6000) 6C105 Chassis
    Form Factor:
    Card / Module
    Network Type:
    Ethernet
    Interface Type:
    Ethernet
    Connector Type:
    RJ-45 (COM port), CHAMP/Telco 50-pin (x4)
    Number of Ports:
    4 x 50-pin Telco/CHAMP connectors + 1 x RJ-45 COM
    Management Type:
    Managed
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Module only; pulled from Cabletron Smart Switch 6000 6C105 chassis
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Cabletron 6E233-49 Ethernet module inspected and in good used condition. Pulled from a working environment where it was in active use and functional. Faceplate and connectors appear clean and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • Intel Network Processor Evaluation Platform KEIXP12EBAA — three-quarter front view showing brushed-metal faceplate label and open chassis with internal PCI backplane and power supply Intel KEIXP12EBAA Network Processor Evaluation Platform — rear panel view showing IEC power inlet, Console DB-9 port, Intel label, and E0/E1 Gigabit Ethernet ports

    Intel KEIXP12EBAA A14226-001 Network Processor Evaluation Platform PCI RJ45

    Intel

    $125.00
    Was: $250.00
    Intel KEIXP12EBAA A14226-001 Network Processor Evaluation Platform PCI RJ45Desktop evaluation platform designed for Intel IXP1200 network processor development and testing. Provides a hardware...
    36241
    SKU:
    36241
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    23.00 LBS
    Brand:
    Intel
    Model:
    KEIXP12EBAA
    MPN:
    A14226-001
    Secondary Model:
    A14226-001
    TA P/N:
    A14226-001
    SKU:
    36241
    Type:
    Network Processor Evaluation Platform
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Does not power on. Sold as-is for parts or repair. No functionality guarantee.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Desktop Chassis
    Power Requirements:
    100-127V / 220-240V AC, 50/60Hz, 6/3A Max, 50W
    Interface Type:
    PCI, RS-232 Console, Async
    Number of Ports:
    2x Gigabit Ethernet (E0/E1), 8x RJ45, Console DB-9, Async
    Port Speed:
    10/100 Ethernet + Gigabit Ethernet
    Connector Type:
    RJ45, DB-9 (Console), IEC C14 Power
    Compatible With:
    Intel IXP1200 Network Processor development/evaluation
    Application:
    Network processor evaluation, development, and testing
    Condition Notes:
    Intel KEIXP12EBAA A14226-001 Network Processor Evaluation Platform does not power on. Tested at our facility — failed to power up. Sold as-is for parts or repair only. No functionality guaranteed.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00