Networking

Networking

  • TCL 2110 Multiport Transceiver chassis angled front-right view showing 9 installed cards with DB25 connectors and LED indicators TCL 2110 Multiport Transceiver front panel view showing POWER switch, fuse holder, and all 9 card slots with DB25 ports and LEDs

    TCL 2110 Multiport Transceiver w/ 6x 2110-2BDM 2x 2110-BDM 1x 2110-A0 Cards

    TCL

    $175.00
    Was: $350.00
    TCL 2110 Multiport Transceiver w/ 6x 2110-2BDM 2x 2110-BDM 1x 2110-A0 CardsThe TCL 2110 is a modular multiport transceiver chassis manufactured by TCL Inc. of Fremont, California. It provides a...
    42520
    SKU:
    42520
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    20.00 LBS
    Brand:
    TCL
    Model:
    2110
    MPN:
    2110
    Type:
    Multiport Transceiver Chassis
    SKU:
    42520
    Seller Notes:
    Includes 6x 2110-2BDM, 2x 2110-BDM, and 1x 2110-A0 cards installed
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Rackmount Chassis
    Power Requirements:
    1/2 Amp Fast Fuse (AC power via integrated cable)
    Number of Slots:
    9 (fully populated)
    Number of Ports:
    Multiple DB25 serial ports per card
    Connector Type:
    DB25 (D-Sub 25-pin)
    Card / Module 1:
    2110-2BDM MP Transceiver card (qty 6)
    Card / Module 2:
    2110-BDM MP Transceiver card (qty 2)
    Card / Module 3:
    2110-A0 card (qty 1)
    Interface Type:
    Serial / RS-232 (DB25)
    Management Type:
    Unmanaged
    Condition:
    Used – Inspected, Not Bench-Tested
    Condition Notes:
    TCL 2110 Multiport Transceiver, used, visually inspected. Unable to power or bench-test. Sold as-inspected. All 9 cards present (6x 2110-2BDM, 2x 2110-BDM, 1x 2110-A0). Normal wear. Contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Compaq 323553-001 Intel NC3121 PCI 10/100 network card — component side showing Intel controller chip and Pulse transformer Compaq 323553-001 NC3121 PCI NIC — solder side showing Compaq label reading 10/100 TX PCI Intel WOL UTP Controller and part number stickers

    Compaq 323553-001 PCI Network Card 10/100 Base-T Intel NC3121 WOL RJ-45

    Compaq

    $9.90
    Was: $20.00
    Compaq 323553-001 PCI Network Card 10/100 Base-T Intel NC3121 WOL RJ-45PCI network interface card for adding or replacing 10/100 Mbps Ethernet connectivity in legacy Compaq systems. Single RJ-45 port...
    42423
    SKU:
    42423
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    Compaq
    Model:
    NC3121
    MPN:
    323553-001
    Secondary Model:
    669209-003
    SKU:
    42423
    Type:
    PCI Network Interface Card (NIC)
    Network Chipset:
    Intel 82559
    Data Transfer Rate:
    10/100 Mbps
    Interface:
    PCI
    Connector Type:
    RJ-45 (UTP)
    Number of Ports:
    1
    Wake-on-LAN (WOL):
    Yes
    Form Factor:
    PCI Card
    Compatible With:
    Compaq ProLiant, Deskpro, Presario desktop systems
    Country/Region of Manufacture:
    Puerto Rico
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; pulled from a working environment and inspected.
    Condition Notes:
    Compaq 323553-001 Intel NC3121 PCI 10/100 NIC. Inspected and in good used condition. Pulled from a working environment where it was in active use. PCB clean, RJ-45 port and bracket show normal wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $9.90
    Was: $20.00
  • Black Box LE605A Thick/Thin Ethernet Repeater – front panel showing AUI 1 port, BNC 1 port, and PWR/COLL indicator LEDs Black Box LE605A Thick/Thin Repeater – right side and bottom view showing rating label and UL mark

    Black Box LE605A Thick/Thin Ethernet Repeater AUI 15-Pin BNC Coax 10Base2

    Black Box

    $45.00
    Was: $90.00
    Black Box LE605A Thick/Thin Ethernet Repeater AUI 15-Pin BNC Coax 10Base2 10Base5The LE605A is a desktop Ethernet repeater that extends coaxial network segments by regenerating and retiming signals...
    42379
    SKU:
    42379
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    4.00 LBS
    Brand:
    Black Box
    Model:
    LE605A
    MPN:
    LE605A
    Type:
    Thick/Thin Ethernet Repeater
    SKU:
    42379
    Condition:
    Used – Inspected
    Seller Notes:
    No power supply included. Unit only.
    Country/Region of Manufacture:
    United States
    Standards:
    IEEE 802.3
    Interface Type:
    AUI (15-pin DB15) and BNC Coax
    AUI Port:
    15-pin DB15 (AUI 1)
    Coax Port:
    BNC (BNC 1)
    Power Connector:
    Round DIN-style power jack (no supply included)
    Network Technology:
    10Base2 (Thinnet) / 10Base5 (Thicknet)
    LED Indicators:
    PWR1, COLL, PWR2 on front panel
    Form Factor:
    Desktop / Standalone
    Manufacturer:
    Garrett Communications, Inc.
    FCC Compliance:
    FCC Class A Computing Device
    Compatible With:
    10Base2 and 10Base5 coaxial Ethernet segments
    Condition Notes:
    Black Box LE605A Thick/Thin Ethernet Repeater inspected and in good condition. Light surface wear. AUI 15-pin and BNC connectors intact. No power supply included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • Tiara 15-00950-1 Lancard/E AT 16-bit ISA Ethernet card — top/component side showing full PCB layout with BNC and AUI bracket connectors Tiara Lancard/E AT close-up of part number label 15-00950-1, serial number TAEC01192, and Samsung MB502A network controller IC

    Tiara 15-00950-1 Lancard/E AT 16-Bit ISA Ethernet Network Card BNC AUI c.1990

    Tiara

    $20.00
    Was: $40.00
    Tiara 15-00950-1 Lancard/E AT 16-Bit ISA Ethernet Network Card BNC AUI c.199016-bit ISA Ethernet network interface card for IBM AT and compatible computers. Supports 10 Mbps Ethernet with BNC...
    42165
    SKU:
    42165
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Tiara
    Model:
    Lancard/E AT
    MPN:
    15-00950-1
    Secondary Model:
    11-00950-1000
    SKU:
    42165
    Type:
    16-Bit ISA Ethernet Network Card (NIC)
    Bus Interface:
    16-Bit ISA (AT)
    Connector Type:
    BNC (10Base2) and AUI (DB15)
    Data Rate:
    10 Mbps
    Network Standard:
    Ethernet 10Base2 / 10Base5
    Form Factor:
    Half-Length ISA Card
    Compatible With:
    IBM AT and compatible 16-bit ISA bus PCs
    Condition:
    Used – Inspected and in Good Condition
    Country/Region of Manufacture:
    USA
    Seller Notes:
    Card only; no software or documentation included.
    Condition Notes:
    Tiara 15-00950-1 Lancard/E AT 16-bit ISA Ethernet NIC inspected and in good used condition. PCB clean, no visible damage. BNC and AUI connectors intact. Normal storage wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Motorola A004087-02 8-bit ISA LAN card top side showing MHW10001 RF module, Hughes LAN Systems markings, and multiple ICs Motorola A004087-02 ISA LAN card bottom side showing PCB traces, part number label, and BNC coax connector bracket

    Motorola A004087-02 8-Bit ISA LAN Card MHW10001 Coax 9015 Hughes LAN Systems

    Motorola

    $60.00
    Was: $125.00
    Motorola A004087-02 8-Bit ISA LAN Card MHW10001 Coax 9015 Hughes LAN Systems8-bit ISA network interface card designed for wireless LAN connectivity in legacy industrial and telecom systems. Features...
    42001
    SKU:
    42001
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Motorola
    Model:
    A004087-02
    MPN:
    A004087-02
    Secondary Model:
    MHW10001
    SKU:
    42001
    Type:
    8-Bit ISA LAN / Network Interface Card
    Bus Interface:
    ISA (8-bit)
    Network Connector:
    Coaxial (BNC)
    RF Module:
    Motorola MHW10001
    Transmit Frequency:
    53.75–59.75 MHz
    Receive Frequency:
    246–252 MHz
    Firmware / PCB Revision:
    V3.2
    Manufacturer / Designer:
    Hughes LAN Systems
    Country/Region of Manufacture:
    United States
    Form Factor:
    Half-Length ISA Card
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; no accessories included.
    Condition Notes:
    Motorola A004087-02 8-bit ISA LAN card. Inspected, good used condition. Pulled from a working environment where it was in use and functional. PCB clean, MHW10001 RF module intact, BNC connector undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • Wang 9454 ISA 16-bit network adapter card – top component side showing main ICs, BNC connectors, and ISA edge connector Wang 9454 ISA network card – solder/bottom side showing PCB traces and unpopulated IC pads

    Wang 9454 ISA 16-Bit Network Adapter Card BNC Coax Ethernet LAN PC ISA Bus

    Wang

    $40.00
    Was: $80.00
    Wang 9454 ISA 16-Bit Network Adapter Card BNC Coax Ethernet LAN PC ISA BusThe Wang 9454 is a 16-bit ISA network interface card (NIC) designed for Wang Laboratories PCs and IBM PC/AT-compatible...
    41989
    SKU:
    41989
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Wang Laboratories
    Model:
    9454
    MPN:
    9454
    Type:
    ISA 16-Bit Network Interface Card (NIC)
    SKU:
    41989
    Bus Interface:
    ISA 16-Bit
    Connector Type:
    Dual BNC (Coaxial)
    Network Type:
    Ethernet (Coax / Thinnet / 10BASE2)
    Form Factor:
    Half-Length ISA Card
    Hardware Revision:
    R1
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Card only; no software or documentation included.
    Country/Region of Manufacture:
    United States
    Compatible With:
    Wang PC, IBM PC/AT, and compatible ISA 16-bit systems
    Condition Notes:
    Wang 9454 ISA 16-bit network adapter inspected and in good condition. PCB, edge connector, and BNC connectors appear intact. Normal light wear for age. Card only — no software or docs included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • Intel CINF9200B PRO/100 PCI LAN Adapter — component side view showing main controller IC and RJ-45 port Intel CINF9200B PRO/100 PCI LAN Adapter — rear label view showing Intergraph certification and model number

    Intel CINF9200B PCI PRO/100 LAN Adapter Network Card 100Mbps RJ-45 Intergraph

    Intel

    $12.00
    Was: $25.00
    Intel CINF9200B PCI PRO/100 LAN Adapter Network Card 100Mbps RJ-45 IntergraphThe Intel CINF9200B is a PCI Fast Ethernet network adapter designed for 10/100 Mbps connectivity. This card is certified...
    41728
    SKU:
    41728
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Intel
    Model:
    CINF9200B
    MPN:
    CINF9200B
    Secondary Model:
    667280-003
    Type:
    PCI LAN / Ethernet Network Adapter Card
    SKU:
    41728
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; no accessories included.
    Certified By:
    Intergraph
    Interface:
    PCI
    Network Speed:
    10/100 Mbps (Fast Ethernet)
    Connector Type:
    RJ-45
    Form Factor:
    Full-Height PCI Card
    Network Standard:
    IEEE 802.3, IEEE 802.3u (Fast Ethernet)
    Compatible With:
    Intergraph workstations, standard PCI desktop PCs
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Intel CINF9200B PCI PRO/100 LAN Adapter. Inspected and in good condition. Pulled from a working environment where it was in use and functional. Light surface wear typical for its age. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.00
    Was: $25.00
  • Intel CINF9200C PRO/100 PCI LAN Adapter – component side showing main controller IC, Pulse transformer, and RJ-45 port Intel CINF9200C PRO/100 PCI LAN Adapter – reverse side showing Intergraph certification label and board part number PB567901-065

    Intel CINF9200C PCI PRO/100 LAN Adapter Network Card Intergraph 10/100 RJ-45

    Intel

    $22.00
    Was: $40.00
    Intel CINF9200C PCI PRO/100 LAN Adapter Network Card Intergraph 10/100 RJ-45Half-height PCI Ethernet network interface card (NIC) with Intel 82557 chipset. Provides 10/100 Mbps Fast Ethernet...
    41727
    SKU:
    41727
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Intel
    Model:
    CINF9200C
    MPN:
    CINF9200C
    Secondary Model:
    PB567901-065
    Type:
    PCI Ethernet LAN Adapter / NIC
    SKU:
    41727
    Chipset:
    Intel 82557 (PRO/100 series)
    Network Speed:
    10/100 Mbps (Fast Ethernet)
    Interface:
    PCI
    Connector Type:
    RJ-45
    Number of Ports:
    1
    Certified By:
    Intergraph
    FCC ID:
    EJMNPDSPD035
    Form Factor:
    Half-Height PCI Card
    Compatible With:
    Intergraph workstations, standard PCI desktops
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Card only; no accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    This Intel CINF9200C PCI PRO/100 LAN Adapter is in good used condition. Pulled from a working environment. PCB and edge connector are clean; bracket and RJ-45 port intact. Normal light wear from prior installation.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $22.00
    Was: $40.00
  • Fastcomm F9200-SS-FNE1-A1000 EtherFRAD open-box contents — unit, manual, power adapter, cable, and adapters with original Fastcomm box Fastcomm EtherFRAD F9200-SS-FNE1-A1000 rear panel showing PORT 1 DB25, NETWORK DB25, ETHERNET RJ-45, DB15 connector, and POWER port

    Fastcomm F9200-SS-FNE1-A1000 EtherFRAD Ethernet FRAD Network Terminal w/ Manual

    Fastcomm

    $45.00
    Was: $90.00
    Fastcomm F9200-SS-FNE1-A1000 EtherFRAD Ethernet FRAD Network Terminal w/ ManualThe Fastcomm EtherFRAD F9200-SS-FNE1-A1000 is a desktop Ethernet Frame Relay Access Device (FRAD) designed to connect...
    41665
    SKU:
    41665
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    Fastcomm
    Model:
    F9200-SS-FNE1-A1000
    MPN:
    F9200-SS-FNE1-A1000
    Type:
    Ethernet Frame Relay Access Device (FRAD)
    SKU:
    41665
    Product Line:
    EtherFRAD
    Network Interface:
    Ethernet (RJ-45)
    WAN Port:
    PORT 1 — DB25 (frame relay network port)
    Network Port:
    NETWORK — DB25 (WAN/serial network port)
    Supervisor Port:
    RJ-11 (Supv console port, front panel)
    Ethernet Port:
    RJ-45 (rear Ethernet)
    Form Factor:
    Desktop
    Protocol:
    Frame Relay
    Technology:
    Ethernet to Frame Relay bridging/access
    Front Panel Indicators:
    Rst, Pwr, Enet Data, Enet Err, Port 1, NET
    Includes:
    Manual, power adapter, RJ cable, DB15 adapters
    Country/Region of Manufacture:
    United States
    Condition:
    Open Box – New, unused; may be out of original packaging
    Seller Notes:
    Includes manual, AC power adapter, RJ cable, and two DB15 adapters
    Condition Notes:
    Fastcomm F9200-SS-FNE1-A1000 EtherFRAD is open-box new — unused, no wear. Includes manual, AC adapter, RJ cable, and two DB15 adapters. Original box present. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • Xyplex MAXserver 1600 MX-1600-001 terminal server — front-left three-quarter view showing 1U rackmount chassis Xyplex MAXserver 1600 — rear panel view showing 16 RJ-45 serial ports, IEC AC inlet, AUI and BNC Ethernet connectors

    Xyplex MX-1600-001 MAXserver 1600 Terminal Server 16-Port AUI BNC Ethernet

    Xyplex

    $99.00
    Was: $200.00
    Xyplex MX-1600-001 MAXserver 1600 Terminal Server 16-Port AUI BNC Ethernet16-port terminal server for serial-to-Ethernet connectivity. Routes serial console and terminal connections over network...
    41595
    SKU:
    41595
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    Xyplex
    Model:
    MX-1600-001
    MPN:
    MX-1600-001
    Type:
    Terminal Server
    SKU:
    41595
    Number of Ports:
    16
    Serial Port Connector:
    RJ-45 (x16)
    Ethernet Interface:
    AUI (15-pin) and BNC Coax
    Form Factor:
    Rack Mount, 1U
    Power Requirements:
    110-240V AC, 1.0-0.5A, 50-60Hz
    Front Panel Indicators:
    CARD, RUN, LAN, CONSOLE LEDs
    Front Panel Features:
    PCMCIA/card slot, status LEDs
    Manufacture Date:
    06-30-93
    Ethernet Address:
    080087-0341D3
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only; no power cord or accessories shown.
    Condition Notes:
    Xyplex MAXserver 1600 MX-1600-001 terminal server inspected and in good used condition. All 16 RJ-45 ports, AUI, and BNC Ethernet connectors appear clean and intact. Normal light wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $99.00
    Was: $200.00
  • Carrier Access 8575H5 HUBmaster Ethernet Hub Module – angled front-left view showing faceplate with four RJ-45 ports and Carrier Access logo Carrier Access 8575H5 HUBmaster – rear angled view showing PCB underside, card-edge backplane connector, and metal shield cover

    Carrier Access 8575H5 HUBmaster 5-Port 10/100 Ethernet Hub Module Card

    Carrier Access

    $55.00
    Was: $100.00
    Carrier Access 8575H5 HUBmaster 5-Port 10/100 Ethernet Hub Module CardThe Carrier Access 8575H5 HUBmaster is a 5-port 10/100 Mbps Ethernet hub module designed to plug into a Carrier Access chassis...
    41408
    SKU:
    41408
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Carrier Access
    Model:
    8575H5
    MPN:
    8575H5
    Type:
    Ethernet Hub Module
    SKU:
    41408
    Number of Ports:
    5
    Port Speed:
    10/100 Mbps
    Connector Type:
    RJ-45
    Form Factor:
    Module / Card
    Management Type:
    Unmanaged
    Interface Type:
    Ethernet (10BaseT / 100BaseTX)
    Backplane Connector:
    High-density card-edge connector
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Hub module only; no chassis included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Carrier Access 8575H5 HUBmaster 5-Port Ethernet Hub Module in good used condition. Pulled from a working environment where it was actively in use. Faceplate and ports clean; no obvious damage. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • AVP 24-Port Video Jack Patchbay 2U Rackmount — front angled view showing two rows of video jacks AVP Video Jack Patchbay — front panel open/tilted showing color-coded TN (blue), RN (orange), T (red), R (black), S (white) terminal rows

    AVP 24-Port Dual Port Video Jack Patchbay 19" Rackmount 2U TN RN T R S

    AVP

    $125.00
    Was: $250.00
    AVP 24-Port Dual Port Video Jack Patchbay 19" Rackmount 2U TN RN T R SThis AVP 24-port dual-port video jack patchbay provides passive signal routing for analog video and audio applications in a 19"...
    41337
    SKU:
    41337
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    16.00 LBS
    Brand:
    AVP
    Model:
    24 Dual Port Video Jack Patchbay
    Type:
    Video Jack Patchbay
    SKU:
    41337
    Number of Ports:
    24 (dual port — 48 jacks total)
    Form Factor:
    19" Rackmount, 2U
    Signal Rows:
    TN, RN, T, R, S
    Ground Terminals:
    GND 1-24, GND 25-48 (green binding posts)
    Connector Type:
    Video Jack (dual row per port)
    Application:
    Broadcast, AV Signal Routing
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only — no cables or patch cords included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    AVP 24-Port Video Jack Patchbay inspected and in good used condition. Jack rows, color-coded terminals (TN, RN, T, R, S), and GND posts intact. Minor surface scuffing on chassis. No cables included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • HP 5182-5446 PCI Network Card – top component side showing main controller ICs, VACR chip, and dual RJ-45 port area on bracket HP 5182-5446 PCI Network Card – PCB solder side showing trace layout and PCI edge connector

    HP 5182-5446 PCI Network Card Rev B Dual RJ-45 Ethernet 5064-1802 Made in UK

    HP

    $12.00
    Was: $25.00
    HP 5182-5446 PCI Network Card Rev B Dual RJ-45 Ethernet 5064-1802 Made in UKThis is a dual-port Ethernet network interface card designed for installation in HP workstations and servers with available...
    41111
    SKU:
    41111
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    HP
    Model:
    5182-5446
    MPN:
    5182-5446
    Secondary Model:
    5064-1802
    SKU:
    41111
    Type:
    PCI Network Interface Card (NIC)
    Hardware Revision:
    Rev B
    Interface:
    PCI
    Connector Type:
    RJ-45
    Number of Ports:
    2
    Network Technology:
    Ethernet
    Form Factor:
    PCI Card
    Country/Region of Manufacture:
    United Kingdom
    Memory:
    Samsung SEC chips (2x, markings: KM68257CLG-15)
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Card only; no software or accessories included.
    Compatible With:
    HP workstations and servers with PCI slots
    Condition Notes:
    HP 5182-5446 PCI Network Card inspected and in good used condition. PCB is clean, bracket and dual RJ-45 ports are intact. Light handling wear typical of a pulled card. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.00
    Was: $25.00
  • Racore A8107-000 LANpac II 16-bit ISA network card – top component side showing full PCB layout and BNC bracket connector Racore A8107-000 LANpac II ISA NIC – solder side (bottom of PCB) with ISA edge connector and BNC port visible

    Racore A8107-000 LANpac II 16-Bit ISA Network Card RPL 3000-0068 Rev A

    Racore

    $35.00
    Was: $70.00
    Racore A8107-000 LANpac II 16-Bit ISA Network Card RPL 3000-0068 Rev A16-bit ISA network interface card with Remote Program Load (RPL) support. Designed for legacy IBM PC/AT compatible systems...
    41041
    SKU:
    41041
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Racore
    Model:
    A8107-000
    MPN:
    A8107-000
    Secondary Model:
    3000-0068
    Type:
    ISA Network Interface Card (NIC)
    SKU:
    41041
    Product Name:
    LANpac II
    Bus Interface:
    ISA (16-bit)
    Data Width:
    16-bit
    Board Revision:
    Rev A
    Features:
    RPL (Remote Program Load) support
    Main Memory Chips:
    Motorola MCM6164C55 (x4 visible)
    Logic ICs:
    SN74ALS574BN, SN74ALS245N (Texas Instruments)
    Connector:
    BNC (coaxial, on bracket)
    Form Factor:
    Full-length ISA card
    Country/Region of Manufacture:
    USA
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Card only; no accessories included.
    Compatible With:
    ISA-bus PCs, IBM PC/AT compatible systems
    Condition Notes:
    Racore A8107-000 LANpac II 16-bit ISA network card. Inspected and in good used condition. PCB is clean, no visible damage. BNC bracket shows light wear from prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • AC Data Systems TJ1010B T1 E1 TVSS surge suppressor shown with included installation instructions, ground cable, RJ-48C patch cable, and wire terminal hardware AC Data Systems TJ1010B surge suppressor – top view showing IN from telco and OUT to equipment terminal blocks, central ground stud, and serial number label 059260-42

    AC Data Systems TJ1010B T1 E1 TVSS Surge Suppressor Protector RJ-48C 10V

    AC Data Systems

    $28.00
    Was: $60.00
    AC Data Systems TJ1010B T1 E1 TVSS Surge Suppressor Protector RJ-48C 10VPassive surge suppression device for T1 and E1 telecom lines. Protects connected equipment from voltage transients and surges...
    40889
    SKU:
    40889
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    AC Data Systems
    Model:
    TJ1010B
    MPN:
    TJ1010B
    Type:
    T1/E1 TVSS Surge Suppressor Protector
    SKU:
    40889
    Clamp Voltage:
    10 Volts
    Interface Type:
    T1, E1
    Connector Type:
    RJ-48C, Terminal Block (screw terminals)
    Standards:
    T-1, E-1 Standard TVSS
    Ports:
    1x RJ-48C, IN terminal block (from telco), OUT terminal block (to equipment)
    Grounding:
    Central ground stud with lug terminal
    Form Factor:
    Compact DIN/surface-mount enclosure
    Seller Notes:
    Includes installation instructions, RJ-48C patch cable, green ground cable, and assorted wire terminals.
    Condition:
    New – Open Box
    Condition Notes:
    AC Data Systems TJ1010B T1/E1 TVSS Surge Suppressor. New, unused, open box — no signs of use or wear. Includes installation instructions, RJ-48C cable, ground cable, and wire terminals. No battery required — this is a passive surge suppressor.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00
  • Dynacom CAT 5e 24-port 1U rackmount patch panel – front view showing all 24 numbered RJ45 ports and rack ears Dynacom CAT 5e 24-port patch panel – rear view showing four punchdown blocks with color-coded T568A/T568B wiring guides and ETL certification labels

    Dynacom CAT 5e 24-Port Patch Panel 1U 19" Rackmount RJ45 T568A T568B ETL

    Dynacom

    $18.00
    Was: $40.00
    Dynacom CAT 5e 24-Port Patch Panel 1U 19" Rackmount RJ45 T568A T568B ETL A 24-port CAT 5e patch panel for 1U rackmount installations. Provides connection points for network cabling in standard 19"...
    40444
    SKU:
    40444
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Dynacom
    Model:
    CAT 5e 24-Port Patch Panel
    Type:
    CAT 5e Patch Panel
    SKU:
    40444
    Number of Ports:
    24
    Port Type:
    RJ45
    Cable Standard:
    CAT 5e
    Wiring Standard:
    T568A / T568B
    Form Factor:
    1U Rackmount
    Rack Width:
    19"
    Management Type:
    Unmanaged
    Certifications:
    ETL Listed, UL Listed, UL Verified
    Standards Compliance:
    ANSI/TIA/EIA-568-B.2
    Compatible With:
    19" standard equipment racks and cabinets
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Panel only; no cables or patch cords included.
    Condition Notes:
    Dynacom CAT 5e 24-Port Patch Panel inspected and in good used condition. Ports and punchdown blocks appear clean. Minor field labeling on port strip. Rack ears intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $18.00
    Was: $40.00
  • Extreme Networks Summit 7i 11702 managed Gigabit switch — front panel with 28 RJ-45 ports and GBIC slots, purple chassis Extreme Networks Summit 7i 11702 — rear panel showing dual PSU inlets (PSU-A and PSU-B) and four cooling fans

    Extreme Networks Summit 7i 11702 28-Port Gigabit Switch 803011-00-04 Dual PSU

    Extreme Networks

    $175.00
    Was: $350.00
    Extreme Networks Summit 7i 11702 28-Port Gigabit Switch 803011-00-04 Dual PSUManaged Gigabit Ethernet switch with 28 RJ-45 ports and 4 GBIC expansion slots. Provides non-blocking wire-speed switching...
    40206
    SKU:
    40206
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    53.00 LBS
    Brand:
    Extreme Networks
    Model:
    Summit 7i
    MPN:
    803011-00-04
    Secondary Model:
    11702
    SKU:
    40206
    Type:
    Managed Gigabit Ethernet Switch
    Number of Ports:
    32 (28x RJ-45 + 4x GBIC)
    LAN Ports:
    28 x RJ-45 100BASE-TX/1000BASE-T
    Expansion Slots:
    4 x GBIC (1000BASE-X)
    Port Speed:
    10/100/1000 Mbps
    Management Type:
    Managed
    Connector Type:
    RJ-45, GBIC
    Console Port:
    DB-9 Serial (Console)
    Modem Port:
    DB-9 Serial (Modem)
    PCMCIA Slot:
    Yes — 1 slot visible on front panel
    Management Port:
    10BASE-T/100BASE-TX RJ-45
    Power Supply:
    Dual Redundant (PSU-A and PSU-B)
    Input Voltage:
    90–264V AC, auto-ranging
    Input Voltage Range:
    90V AC to 264V AC
    Power Requirements:
    100–120V AC or 200–240V AC, 50/60Hz
    Form Factor:
    Desktop / Rackmountable, 4U
    Routing Protocol:
    IP/IPX
    Switching Type:
    Non-blocking wire-speed switching
    Stackable:
    Yes
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes dual power supplies (PSU-A and PSU-B). No GBIC modules included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Extreme Networks Summit 7i 11702 28-port Gigabit switch. Inspected and in good condition — pulled from a working environment where it was functional. Both PSUs present. No GBIC modules included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Promptus PC 100700-3 BRI NIC ISA card kit — full contents in open box showing card, floppy disk sets, and Venue 2000 documentation Promptus PTL370-0270-02 16-bit ISA BRI NIC card — angled top view showing three RJ45 ports and Austel permit label on bracket end

    Promptus PC 100700-3 BRI NIC ISA Card PTL370-0270-02 PictureTel Venue 2000

    Promptus

    $110.00
    Was: $225.00
    Promptus PC 100700-3 BRI NIC ISA Card PTL370-0270-02 PictureTel Venue 200016-bit ISA network interface card designed for BRI ISDN connectivity in PictureTel videoconferencing systems. This card...
    40011
    SKU:
    40011
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Promptus
    Model:
    PC 100700-3
    MPN:
    PTL370-0270-02
    Secondary Model:
    PTL370-0270-02
    SKU:
    40011
    Type:
    BRI ISDN Network Interface Card (NIC)
    Form Factor:
    16-bit ISA
    Bus Interface:
    ISA (16-bit)
    Number of Ports:
    3
    Connector Type:
    RJ45
    Interface Type:
    BRI ISDN
    FCC ID:
    LNY-BRI-NIC-ISA
    Hardware Revision:
    C2 A7 / REV B
    Compatible With:
    PictureTel Venue 2000, S2000 Videoconferencing System
    Software Included:
    Venue 2000 System Software v1.2 & v1.3
    Software Included 2:
    Virtuoso Audio Option, High Data Rates Option
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes card, Venue 2000 software disks (v1.2/1.3), Virtuoso Audio Option, High Data Rates Option, and Software Version 1.3 Release Bulletin
    Country/Region of Manufacture:
    United States
    Regulatory Compliance:
    FCC Part 15; Austel Permit A96/12/0215 (Australian)
    Condition Notes:
    Promptus PC 100700-3 BRI NIC ISA card inspected and in good used condition. Pulled from a working environment where it was in active use and functional. Includes full Venue 2000 software suite. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • Microtest Lanport-II 3851-02 network tester shown with original spiral-bound User Guide — top and front panel view Microtest Lanport-II 3851-02 side view showing BNC network connector on right end and power port on left

    Microtest Lanport-II 3851-02 Network Tester BNC COM1 COM2 Serial w/ User Guide

    Microtest

    $35.00
    Was: $70.00
    Microtest Lanport-II 3851-02 Network Tester BNC COM1 COM2 Serial w/ User GuideHandheld network testing device designed for 10BASE2 Thin Ethernet coaxial LAN diagnostics. Features one BNC network port...
    40008
    SKU:
    40008
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Microtest
    Model:
    Lanport-II
    MPN:
    3851-02
    Type:
    Network Testing Device
    SKU:
    40008
    Seller Notes:
    Includes original Lanport-II User Guide (Manual P/N 2920-4500-01)
    Country/Region of Manufacture:
    United States
    Form Factor:
    Handheld
    Interface Type:
    BNC (Network), DB9 Serial (COM1, COM2)
    Number of Ports:
    3 (1x BNC, 2x DB9 Serial)
    Connector Type:
    BNC, DB9
    Compatible With:
    10BASE2 / Thin Ethernet coax LAN networks
    Manual Part Number:
    2920-4500-01
    Document Number:
    04-101-0990-2
    Year:
    1990
    Condition:
    Used – Inspected and in Good Condition
    Condition Notes:
    Microtest Lanport-II 3851-02 network tester inspected and in good condition. Case shows light age-related discoloration and minor scuffing. BNC and dual DB9 serial ports intact. Includes original User Guide (P/N 2920-4500-01).
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Ortronics OR-809004981 96-port RJ45 patch panel — front face showing all 96 numbered RJ45 ports in grouped modules Ortronics OR-809004981 patch panel — rear view showing black steel chassis with visible scratches and a small label

    Ortronics OR-809004981 96-Port RJ45 Communication Circuit Patch Panel Rackmount

    Ortronics

    $75.00
    Was: $150.00
    Ortronics OR-809004981 96-Port RJ45 Communication Circuit Patch Panel Rackmount96-port patch panel for structured cabling systems. Provides centralized connection and management of RJ45 communication...
    39956
    SKU:
    39956
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    Ortronics
    Model:
    OR-809004981
    MPN:
    OR-809004981
    Type:
    RJ45 Communication Circuit Patch Panel
    SKU:
    39956
    Number of Ports:
    96
    Connector Type:
    RJ45
    Form Factor:
    Rackmount
    Termination Type:
    IDC (Insulation Displacement Connector)
    Certifications:
    UL Listed (E131600), CSA (LR 90894)
    Date Code:
    1091 (October 1991)
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Pre-wired rear IDC terminations; see photos for wiring configuration
    Country/Region of Manufacture:
    United States
    Compatible With:
    Standard EIA/TIA rackmount cabinets and enclosures
    Condition Notes:
    Ortronics OR-809004981 96-Port RJ45 Patch Panel. Inspected and in good used condition. Front ports clean and intact. Rear chassis shows moderate scratching from prior use. Pre-wired IDC rear terminations.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00