Custom
-
Custom Plastic Sheet Corner Trimmer 14.5" Wide THK HSR20 SMC Pneumatic 110VAC
Custom
$750.00Was: $1,500.00Custom Plastic Sheet Corner Trimmer 14.5" Wide THK HSR20 SMC Pneumatic 110VACThis is a custom-built pneumatic corner trimmer designed to cut the corners of plastic sheets up to 14.5 inches wide. The...47242- SKU:
- 47242
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 220.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Corner Trimmer 14.5"
- Type:
- Pneumatic Corner Trimmer / Sheet Fabrication Machine
- SKU:
- 47242
- Power Requirements:
- 110 VAC
- Power Supply:
- Rhine PSP24-060S, 60W, 110VAC to 24VDC
- Sheet Width Capacity:
- 14.5 inches
- Blade Type:
- 1" wide x 0.25" thick slanted blades
- Linear Motion Guides:
- THK HSR20 (x2)
- Pneumatic Cylinders:
- SMC CG1UN50-25 (x2), Max Press 145 PSI / 1.00 MPa
- Solenoid Valves:
- SMC VQC4101-5 (x2)
- Filter/Regulator:
- SMC AW40-04E
- Safety Valve:
- SMC VHS40-04
- Optical Sensors:
- Keyence FS-N11CP (x2)
- Door Sensor:
- Telemacanique XSC-PA593 with Danner E5-FA-9AA
- Time Delay Relay:
- Fuji Electric MS4SA-CE-PA593 (x3)
- Frame:
- Aluminum extrusion frame with leveling feet
- Controls:
- Power On button, Emergency Stop (PARO DE EMERGENCIA)
- Enclosure:
- Clear acrylic safety guarding on upper cutting zone
- Catch Tray:
- Removable green steel scrap/catch drawer with handle
- Country/Region of Manufacture:
- United States
- Application:
- Corner trimming of plastic sheets in fabrication
- Condition:
- Used – Inspected
- Seller Notes:
- Custom machine; sold as pictured with all visible components.
- Condition Notes:
- This custom plastic sheet corner trimmer has been inspected and is in good condition. Frame, blade assemblies, THK linear guides, SMC pneumatic cylinders, and controls all appear intact. Normal surface wear from prior use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$750.00Was: $1,500.00 -
Custom Blind Rivet Station SMC Norgren Intensifier Pump 30:1 Pneumatic Assembly
Custom
$750.00Was: $1,500.00Custom Blind Rivet Station SMC Norgren Intensifier Pump 30:1 Pneumatic AssemblyThis is a custom-built, floor-standing pneumatic blind rivet station housed in a dark green steel cabinet on an aluminum...48198- SKU:
- 48198
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 254.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Blind Rivet Station
- MPN:
- TASQ-30-00-060
- Type:
- Pneumatic Blind Rivet Assembly Station
- SKU:
- 48198
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes all installed pneumatic components as described and shown in photos
- Drive Type:
- Air / Pneumatic
- Intensifier Pump Ratio:
- 30:1
- Intensifier Pump MPN:
- TASQ-30-00-060
- Filter/Regulator:
- SMC AW30-N03-8Z
- Inline Valve:
- Norgren V61R5D7AXP0900
- Pneumatic Valve:
- SMC NVM12 (4 units)
- High-Pressure Hose:
- Spir Star DPS221-384
- Form Factor:
- Floor Standing / Cabinet Enclosed
- Application:
- Blind Rivet Fastening / Pneumatic Assembly
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Custom blind rivet station inspected and in good condition. All pneumatic components present: SMC AW30-N03-8Z regulator, Norgren inline valve, TASQ-30-00-060 30:1 intensifier pump, SMC NVM12 valves, Spir Star hoses. Locking drawer with key included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$750.00Was: $1,500.00 -
Sanyu Electric AC 100V 200V Industrial Power Distribution Unit NV30-CA Breakers
Custom
$500.00Was: $1,000.00Sanyu Electric AC 100V 200V Industrial Power Distribution Unit NV30-CA BreakersThis is a custom floor-standing industrial AC power distribution unit manufactured by Sanyu Electric Co., Ltd...48223- SKU:
- 48223
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 143.00 LBS
- Brand:
- Sanyu Electric (三友電気株式会社)
- Model:
- 1050
- MPN:
- 1050
- Type:
- Industrial AC Power Distribution Unit
- SKU:
- 48223
- Input Voltage:
- AC 100-200V, 50-60Hz
- Output Voltage:
- AC 100V and AC 200V
- Circuit Breaker 1:
- Mitsubishi NV30-CA, 3P3E, 15A, AC 100-200V, 50-60Hz
- Circuit Breaker 2:
- Mitsubishi NV30-CA, 3P3E, 10A, AC 100-200V, 50-60Hz
- Circuit Breaker Model:
- Mitsubishi NV30-CA
- Phase:
- 3-Phase (3P3E)
- Frequency:
- 50/60 Hz
- Voltmeters:
- 2x Mitsubishi analog panel voltmeters (0-150V and 0-400V)
- Output Connectors:
- Multi-pin circular connectors: AC 100V and AC 200V outputs
- Input Connector:
- Multi-pin circular connector labeled FROM MAIN
- Transformer Tap Selector:
- Internal multi-tap terminal board (346V–480V primary taps visible)
- Form Factor:
- Floor-standing cabinet on casters
- Dimensions:
- 17L x 16W x 14H inches (approx.)
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Includes two Mitsubishi NV30-CA breakers, analog voltmeters, and multi-tap transformer panel
- Condition Notes:
- Sanyu Electric AC 100/200V Industrial Power Distribution Unit, Product No. 1050. Inspected, good used condition. Light surface wear and minor scuffing. Both Mitsubishi NV30-CA breakers intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$500.00Was: $1,000.00 -
Plastic Mobile 6-Section Acid Mix Bath on Wheels 27.5x15x18 HCL Lab
Custom
$150.00Was: $300.00Plastic Mobile 6-Section Acid Mix Bath on Wheels 27.5x15x18 HCL LabThis is a custom-fabricated plastic mobile acid mix bath built on a four-caster wheel base for easy repositioning within a lab or...48608- SKU:
- 48608
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 31.00 LBS
- Brand:
- Unbranded
- Model:
- Custom 27.5x15x18 6-Section Acid Mix Bath
- MPN:
- N/A – Custom Fabricated
- Type:
- Mobile Acid Mix Bath / Chemical Processing Bath
- SKU:
- 48608
- Condition:
- Used – Inspected
- Seller Notes:
- Includes removable lid panel and bath on caster wheels
- Material:
- Plastic (chemical-resistant white-coated construction)
- Number of Sections:
- 6
- Overall Dimensions:
- 27.5"L x 15"W x 18"H
- Total Bath Dimensions:
- 22.5"L x 14.5"W x 8"D
- Individual Section Dimensions:
- 7"L x 7"W x 7.5"D (qty 6)
- Mobility:
- 4 caster wheels (locking/swivel)
- Chemical Compatibility:
- HCL (Hydrochloric Acid) – per warning label
- Lid / Cover:
- Removable flat panel lid with handle cutout
- Application:
- Acid mixing, chemical processing, semiconductor wet bench
- Form Factor:
- Mobile / Cart-mounted
- Condition Notes:
- Custom plastic mobile 6-section acid mix bath on wheels, inspected and in good used condition. Interior sections show chemical residue/yellowing consistent with prior use. Exterior clean with minor scuffing.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Custom Heavy Duty Hot Plate 5.75in Dia 750°F 250V 30A w/ Cover & Thermocouple
Custom
$275.00Was: $550.00Custom Heavy Duty Hot Plate 5.75in Dia 750°F 250V 30A w/ Cover & ThermocoupleThis is a custom-built, heavy-duty hot plate designed for semiconductor wafer processing and high-temperature lab...22582- SKU:
- 22582
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 80.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Heavy Duty Hot Plate
- Type:
- Semiconductor Wafer Hot Plate
- SKU:
- 22582
- Condition:
- Used – Inspected and Tested
- Heating Element Diameter:
- 5.75 in (circular)
- Upper Surface Plate Dimensions:
- 7.75 x 11.5 in
- Maximum Temperature:
- 750°F
- Internal Resistance:
- 15.4 Ohms
- Voltage Rating:
- 250V
- Current Rating:
- 30A
- Phase:
- Single Phase
- Power Connector:
- 30A 250V Locking Plug (NEMA L6-30 style)
- Temperature Sensor:
- Thermocouple with braided cable and connector
- Includes:
- Custom gas-containment cover, thermocouple with cable
- Application:
- Silicon wafer curing, semiconductor processing
- Form Factor:
- Benchtop
- Cover Included:
- Yes – custom cover to hold gas over heating surface
- Seller Notes:
- Includes custom gas-containment cover and thermocouple. Resistance checked prior to shipment.
- Condition Notes:
- Custom heavy-duty semiconductor hot plate, inspected and confirmed heating under power. Resistance checked at 15.4Ω, no short circuits. Normal lab wear. Includes gas-containment cover and thermocouple. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Custom 15-Pin VGA Video Cable Adapter Box with 3.5mm Stereo Audio Output Jack
Custom
$20.00Was: $60.00Custom 15-Pin VGA Video Cable Adapter Box with 3.5mm Stereo Audio Output Jack This is a custom-built VGA adapter box designed to convert and route video and audio signals. The unit features a 15-pin...37090- SKU:
- 37090
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Type:
- VGA Video Cable Adapter Box with Audio Output
- SKU:
- 37090
- Condition:
- As-Is / For Parts or Not Working
- Connector Type 1:
- 15-Pin VGA (DB-15) Male
- Connector Type 2:
- 3.5mm Stereo Audio Jack
- Connector Type 3:
- USB Type-B Port
- Connector Type 4:
- Optical Audio Port
- Enclosure Material:
- Gold Anodized Aluminum
- Cable Type:
- VGA (HD-15) with Audio Output
- Seller Notes:
- Sold as-is for parts. Unit includes attached VGA cable and 3.5mm audio plug.
- Condition Notes:
- Custom 15-pin VGA video cable adapter box with 3.5mm stereo audio output jack in used condition. The gold anodized aluminum enclosure shows light surface wear consistent with prior use but remains fully functional.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $60.00 -
Manual Control Box 8-Key Robot Industrial Pendant DB15 15-Pin Interface Cable
Custom
$50.00Was: $100.00Manual Control Box 8-Key Robot Industrial Pendant DB15 15-Pin Interface CableHandheld control pendant with 8 pushbuttons and integrated DB15 connector cable. Designed for manual operation and...46691- SKU:
- 46691
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- Manual Control Box 8-Key
- Type:
- Manual Control Pendant / Pushbutton Box
- Number of Buttons:
- 8
- Interface:
- DB15 (15-Pin D-Sub)
- Connector Type:
- DB15 Male
- Button Labels:
- Recei. Robo, Turn Over, Conve., Turn Over Up/Down
- Button Labels 2:
- Robot SP-DL, Robot Sampl, Up/Down Stage, Buffer Table
- Application:
- Industrial Robot / Automation Control
- Form Factor:
- Handheld Pendant
- Cable Included:
- Yes — integrated gray cable with DB15 connector
- SKU:
- 46691
- Seller Notes:
- Includes integrated DB15 cable. No additional accessories.
- Condition Notes:
- Manual Control Box 8-key robot pendant. Inspected and in good used condition. Housing shows light scuffing from prior use. All 8 buttons present. DB15 cable intact, pins straight and clean.
$50.00Was: $100.00 -
PTFE Benchtop Wafer Etch Bath Recirculating Filter Washer 23.25x15x16.5 As-Is
Custom
$400.00Was: $800.00PTFE Benchtop Wafer Etch Bath Recirculating Filter Washer 23.25x15x16.5 As-IsThis is a custom-fabricated PTFE (polytetrafluoroethylene) benchtop wafer etch bath with an integrated recirculating...48451- SKU:
- 48451
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 36.00 LBS
- Brand:
- Unbranded
- Model:
- Custom PTFE Wafer Etch Bath
- Type:
- Benchtop PTFE Recirculating Filter Wafer Etch Bath
- Material:
- PTFE (Polytetrafluoroethylene)
- Form Factor:
- Benchtop
- Outer Dimensions:
- 23.25" x 15" x 16.5"
- Inner Dimensions:
- 20.25" x 11.25" x 11.25"
- Wafer Rinse Section Dimensions:
- 17.5" x 8.75" x 10" Deep
- Application / Use Case:
- Semiconductor wafer wet etching, rinsing, cleaning
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Lid has broken corner and broken hinge section. Sold as-is.
- Number of Fittings:
- Multiple PVC plumbing fittings (inlet/outlet ports visible)
- Filter/Pump Housing:
- External PTFE pump/filter housing on underside
- Wafer Carrier Plate:
- PTFE perforated wafer carrier plate included
- SKU:
- 48451
- Condition Notes:
- Custom PTFE benchtop wafer etch bath sold AS-IS. Lid has a broken corner and broken hinge section — chipped and cosmetically damaged, does still close. Bath body intact. No functionality guaranteed. For parts or repair.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$400.00Was: $800.00 -
Misco MX1-710-000-2 Plastic Sheet Mill Punch System 14.75" Omron CP1L SMC
Custom
$2,200.00Was: $4,400.00Misco MX1-710-000-2 Plastic Sheet Mill Punch System 14.75" Omron CP1L SMCThe Misco Industries MX1-710-000-2 is a custom-built automated mill/punch system designed to punch or trim plastic sheets up...48197- SKU:
- 48197
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 264.00 LBS
- Brand:
- Misco Industries
- Model:
- MX1-710-000-2
- MPN:
- MX1-710-000-2
- Type:
- Automated Plastic Sheet Mill / Punch System
- SKU:
- 48197
- Sheet Width Capacity:
- 14.75 inches
- Power Requirements:
- 110 VAC
- Power Supply:
- Rhine PSP24-060S, 60W, 110 VAC to 24VDC
- PLC / Controller:
- Omron Sysmac CP1L-M30DR-A
- Optical Sensors:
- Keyence FS-N11CP (qty 4)
- Punch Configuration:
- Four punches, 1/8 in diameter each
- Pneumatic Cylinder:
- SMC CDQ2A80-20D
- Linear Slides:
- HIWIN EG20 Linear Sliders
- Vacuum / Scrap Conveyor:
- EXAIR Line Vac, 2 ports
- Pneumatic Lockout Valve:
- SMC VHS40-04
- Pneumatic Filter-Regulator:
- SMC AW40-04E
- Pneumatic Solenoid Valves:
- SMC VQC4101-5 (qty 4), SMC VQC4101-5W (qty 2)
- Pneumatic Pressure Rating:
- 250 PSIG MAX / 1.7 MPa MAX / 17 BAR MAX
- Foot Switch / Press Control:
- Banner OTBVP6QD (UL Listed Press Control)
- Frame / Structure:
- Aluminum extrusion frame with casters
- Application:
- Plastic sheet edge punching / trimming; solar panel edge cut
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Complete system as shown; all major components present
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Misco MX1-710-000-2 Plastic Sheet Mill/Punch System inspected and in good condition. Pulled from a working environment. All major components present including Omron CP1L PLC, Keyence sensors, SMC valves, HIWIN slides, and EXAIR Line Vac.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$2,200.00Was: $4,400.00 -
F&R Enterprises 2T23-17 Power Supply Transformer Rectifier 208/240V 20/24V CT
Custom
$50.00Was: $100.00F&R Enterprises 2T23-17 Power Supply Transformer Rectifier 208/240V 20/24V CTThis is a custom open-frame power supply assembly built around an F&R Enterprises model 2T23-17 transformer, paired with a...35027- SKU:
- 35027
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 10.00 LBS
- Brand:
- F&R Enterprises
- Model:
- 2T23-17
- MPN:
- 2T23-17
- SKU:
- 35027
- Type:
- Power Supply Assembly (Transformer + Rectifier + Filter Capacitor)
- Primary Voltage:
- 208V (tap 2), 240V (tap 3), 0V (tap 1)
- Secondary Voltage:
- 24V (tap 8), 20V CT (taps 6/7/8), 0V (tap 7)
- Secondary Current:
- 5A @ 24V; 0.15A @ 20V CT
- Input Frequency:
- 50/60 Hz
- Output DC Voltage (approx.):
- ~30V DC (after rectification of 24V AC)
- Capacitor:
- Mallory CG23U50C1, 2000 µF, 50V DC
- Manufacturer Location:
- San Francisco, CA
- Country/Region of Manufacture:
- United States
- Form Factor:
- Open-frame chassis / panel mount
- Wiring Termination:
- Flying leads with multi-pin connector block
- Condition:
- Used – Inspected
- Seller Notes:
- Includes transformer, rectifier, and filter capacitor on chassis. Not bench-tested.
- Condition Notes:
- F&R Enterprises 2T23-17 power supply assembly inspected and in good used condition. Not bench-tested at our facility; output ratings per transformer label: 20V CT / 0.15A and ~30V DC / 5A. Wiring and connector appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$50.00Was: $100.00 -
Nihon Pisco VGE07 Dual Inlet Vacuum Pressurized Flow Device KLA 00214AAP 0-8 Bar
Custom
$44.60Was: $120.00Nihon Pisco VGE07 Dual Inlet Vacuum Pressurized Flow Device KLA 00214AAP 0-8 BarDual inlet vacuum and pressurized flow control device manufactured by Nihon Pisco. Operates across 0-8 bar range with...32258- SKU:
- 32258
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 10.00 LBS
- Brand:
- Nihon Pisco
- Model:
- VGE07
- MPN:
- KLA 00214AAP
- Type:
- Dual Inlet Vacuum / Pressurized Flow Device
- SKU:
- 32258
- Pressure Range:
- 0-8 Bar
- Gauge Type:
- Analog pressure/vacuum gauge (bar and psi)
- Inlets:
- 2 vacuum inlets (Vacuum-1, Vacuum-2)
- Outlets:
- Pressure outlets with push-in fittings
- Regulator Type:
- Push-Lock adjustable pressure regulators
- Number of Regulators:
- 2
- Fitting Type:
- Push-in pneumatic fittings (red/brass)
- Internal Components:
- Nihon Pisco VGE07 valve block, filter/separator unit
- Enclosure:
- Gray plastic IP-rated enclosure with lid
- Mounting:
- Panel/wall mount brackets included
- Application / Use Case:
- Vacuum and pressure flow control for lab/industrial
- Condition:
- Used – Inspected
- Seller Notes:
- Includes internal tubing, valve block, and filter. No external hoses.
- Country/Region of Manufacture:
- Japan
- Condition Notes:
- Nihon Pisco VGE07 KLA 00214AAP dual inlet vacuum/pressure flow device. Used, inspected, good condition. Enclosure intact, fittings and gauge present. Internal tubing and valve blocks intact. Light use wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$44.60Was: $120.00 -
Moonlander Stubby M31460 Static Electrical Tester Voice Coil Shorts Head Sel
Custom
$75.00Was: $150.00Moonlander Stubby M31460 Static Electrical Tester Voice Coil Shorts Head Sel Benchtop static electrical tester designed for disk drive head and voice coil diagnostics. Tests voice coil resistance,...31259- SKU:
- 31259
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Unbranded
- Model:
- Moonlander Stubby
- MPN:
- M31460
- Type:
- Static Electrical Tester
- SKU:
- 31259
- Condition:
- Used – Pulled from Working Environment
- Form Factor:
- Benchtop
- Power Requirements:
- 120V AC (standard NEMA 5-15 plug)
- Features:
- Voice Coil Resistance, Voice Coil Shorts, Write Unsafe, +12VDC Short, Head Select 0/1
- Indicators:
- Red, green, and yellow LED indicators for each test function
- Controls:
- Toggle switch (Voice Coil Res/Shorts), Head Select switch, Power rocker switch
- Application:
- Disk drive head and voice coil static electrical testing
- Seller Notes:
- Includes attached AC power cord (NEMA 5-15).
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Moonlander Stubby M31460 Static Electrical Tester pulled from a working environment where it was in active use and functional. Inspected and in good used condition. Front panel, LEDs, and controls intact. Includes AC power cord.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Custom Calibration Fixture Industrial Automation XY Stage Probe Holder Benchtop
Custom
$125.00Was: $250.00Custom Calibration Fixture Industrial Automation XY Stage Probe Holder BenchtopCustom-built calibration fixture designed for precision probe positioning and alignment in industrial automation systems...31217- SKU:
- 31217
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 10.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Calibration Fixture
- Type:
- Calibration Fixture / Probe Holder
- SKU:
- 31217
- Condition:
- Used – Inspected
- Form Factor:
- Benchtop
- Base Material:
- Anodized Aluminum / Black
- Stage Type:
- XY Adjustment Stage
- Actuator:
- Brass Knurled Knob
- Probe Holder:
- Spring-Loaded Probe/Pin Holder
- Cable / Connector:
- Braided Wire w/ Blue 2-Pin Connector
- Mounting:
- Flat Base Plate with Rubber Feet
- Application:
- Industrial Automation Calibration / Probing
- Seller Notes:
- Includes braided cable harness with blue 2-pin connector. No brand markings visible.
- Condition Notes:
- This custom calibration fixture with XY stage and probe holder has been inspected and is in good used condition. Body shows light wear. Brass knob, probe holder, springs, and braided wire harness appear intact. No brand markings visible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Custom Power Conditioner ABB EH 145 Contactor Signal Transformer MPI-650-24
Custom
$400.00Was: $800.00Custom Power Conditioner ABB EH 145 Contactor Signal Transformer MPI-650-24 650VA Steel wall-mount or floor-mount power conditioning enclosure featuring an ABB EH 145 three-pole contactor and Signal...30688- SKU:
- 30688
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 151.00 LBS
- Brand:
- ABB / Signal Transformer
- Model:
- EH 145
- Secondary Model:
- MPI-650-24
- MPN:
- MPI-650-24
- SKU:
- 30688
- Type:
- Custom Power Conditioner Enclosure
- Condition:
- Used – Inspected and Pulled from Working Environment
- Seller Notes:
- Includes ABB EH 145 contactor, Signal Transformer MPI-650-24, circuit breakers, and wiring
- Contactor:
- ABB EH 145, 3-pole, 200A AC3
- Transformer:
- Signal Transformer MPI-650-24, 650VA
- Primary Voltage:
- 100/115/200/215/230V, 50/60Hz
- Secondary Voltage I:
- 12V @ 27.1A
- Secondary Voltage II:
- 12V @ 27.1A
- Transformer Rating:
- 650VA
- Contactor Max Breaking (200-208V):
- 40 hp
- Contactor Max Breaking (220-240V):
- 50 hp
- Contactor Max Breaking (440-480V):
- 100 hp
- Contactor Max Breaking (550-600V):
- 150 hp
- Contactor AC1 Rating:
- 230A
- Emergency Cutoff:
- Yes – red mushroom-head Emergency Off button
- Pilot Indicator:
- Green pilot indicator lamp
- Output Connectors:
- J64, J65 (twist-lock), J80 (multi-pin connector)
- Circuit Breakers:
- Multiple ABB DIN-rail circuit breakers included
- Contactors:
- ABB K1 (B6-30-10), ABB K2 (B6-30-10)
- Terminal Blocks:
- TB1 multi-pole terminal block; NEUT neutral bus bar
- Drop-Out Voltage Relay:
- Adjustable drop-out voltage relay visible on interior
- Enclosure Type:
- Steel lockable enclosure with key lock
- Form Factor:
- Wall-mount / Floor-mount steel enclosure
- Danger Label:
- DANGER HIGH VOLTAGE label on front and interior door
- Country/Region of Manufacture:
- United States
- Condition Notes:
- This custom power conditioner enclosure with ABB EH 145 contactor and Signal Transformer MPI-650-24 has been inspected and appears to be in good used condition.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$400.00Was: $800.00 -
Fiber Channel Kit PC Board Pc2A 94V-0 4299 with Mounting Bracket SCSI Connector
Custom
$30.00Was: $60.00Fiber Channel Kit PC Board Pc2A 94V-0 4299 with Mounting Bracket SCSI ConnectorThis is a Fiber Channel interface PCB card designed for high-speed data communication in industrial and telecom systems...30059- SKU:
- 30059
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- Pc2A 4299
- MPN:
- Pc2A 94V-0 4299
- Type:
- Fiber Channel Interface PCB Card / Module
- SKU:
- 30059
- Condition:
- Used – Inspected and in Good Condition
- Interface Type:
- Fiber Channel / SCSI-style high-density connector
- Connector Type:
- High-Density SCSI-style (visible on rear edge)
- Form Factor:
- Card/Module with metal mounting bracket
- PCB Rating:
- 94V-0
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes PCB card and attached metal mounting bracket
- Features:
- FAULT/ACTIVE LED indicators; 4-port fiber connectors; power header
- Condition Notes:
- Fiber Channel PCB Pc2A 94V-0 4299 has been inspected and is in good used condition. Board, mounting bracket, fiber connectors, and SCSI-style edge connector all appear clean and undamaged. Minor adhesive residue near label area.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$30.00Was: $60.00 -
CTTS-4313/RHM Collimation Tower Test Set 5.6 GHz Oscillator HP PIN Diode ARRA
Custom
$225.00Was: $450.00CTTS-4313/RHM Collimation Tower Test Set 5.6 GHz Oscillator HP PIN Diode ARRAThe CTTS-4313/RHM is a portable, self-contained collimation tower test set built into a rugged aluminum and wood-laminate...29764- SKU:
- 29764
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 20.00 LBS
- Brand:
- Unbranded
- Model:
- CTTS-4313/RHM
- MPN:
- CTTS-4313/RHM
- SKU:
- 29764
- Type:
- Portable Collimation Tower Test Set
- Condition:
- As-Is / For Parts or Not Working
- Frequency:
- 5.6 GHz (oscillator)
- RF Output Connector:
- SMA (female, front panel)
- Included Components:
- Two potted power supplies, 5.6 GHz oscillator, two HP PIN diode switches, ARRA variable attenuator
- Oscillator Supply Voltage:
- +30V / 0.2A
- Form Factor:
- Portable / Briefcase-style enclosure
- Enclosure:
- Aluminum and wood-laminate portable case with handle
- Front Panel Controls:
- Multiple toggle switches (labeled C-BAND, CW, CODE 1-4, etc.), ATTEN knob, RF SMA port, FUSE
- Seller Notes:
- Sold for parts. Oscillator confirmed functional at +30V/0.2A. Full system untested.
- Compatible With:
- Collimation tower antenna alignment systems
- Application:
- Antenna collimation, RF alignment, microwave test
- PIN Diode Switch Manufacturer:
- HP (Hewlett-Packard)
- Attenuator Manufacturer:
- ARRA
- Condition Notes:
- CTTS-4313/RHM Collimation Tower Test Set sold for parts. Oscillator confirmed functional at +30V/0.2A; full system not tested and not guaranteed. Cosmetically good. Sold as-is.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$225.00Was: $450.00 -
DT1448 Custom DC Power Test Equipment Bench Unit w/ Analog Meters & DVM
Custom
$225.00Was: $500.00DT1448 Custom DC Power Test Equipment Bench Unit w/ Analog Meters & DVM Benchtop DC power test equipment featuring dual Simpson microammeters for primary and secondary supply current measurement,...28370- SKU:
- 28370
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 31.00 LBS
- Brand:
- Unbranded
- Model:
- DT1448
- MPN:
- DT1448
- SKU:
- 28370
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold as-is. Powers on, display active, panel switches non-functional.
- Form Factor:
- Benchtop
- Measurement Type:
- DC Current, DC Voltage
- Meter Type 1:
- Simpson Direct Current Microammeter (Secondary Supply Current)
- Meter Type 2:
- Simpson Direct Current Microammeter (Primary Supply Current)
- DVM Module:
- Analogic 5
- Display:
- LED digital test number counter; Analogic DVM display; LCD window
- Controls:
- Voltage Adjust Pot, Test Mode Switch (3-position), Low Bat indicator
- Indicators:
- Low Bat LED, Peak Det LED, red pushbutton indicators
- Features:
- Test Number counter, Secondary Supply Current, Primary Supply Current
- Service Label:
- Micro Metrology calibration/service label present on front panel
- Power Requirements:
- Unknown – not confirmed from available data
- Country of Manufacture:
- USA (likely)
- Condition Notes:
- This DT1448 custom DC power test bench powers on and the LED test number display shows a reading, but activating panel switches produces no response. The unit is being sold AS-IS for parts or repair — functionality is not guaranteed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$225.00Was: $500.00 -
FM Precision Machined IC Test Socket Jig Fixture Set Lot of 4 Semiconductor Lab
Custom
$85.00Was: $175.00FM Precision Machined IC Test Socket Jig Fixture Set Lot of 4 Semiconductor LabThis is a lot of four precision machined IC test socket and handler fixture jigs branded with an engraved "fm" maker's...27010- SKU:
- 27010
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 30.00 LBS
- Brand:
- FM (maker mark — full brand name not confirmed)
- Model:
- IC Test Socket Fixture Jig
- MPN:
- 586135
- Type:
- IC Test Socket / Handler Fixture Jig
- SKU:
- 27010
- Condition:
- Used – Inspected
- Seller Notes:
- Lot of 4 assorted precision machined IC test fixture jigs; sold as a set
- Material:
- Machined Aluminum / Steel
- Quantity:
- 4 pieces (sold as a lot)
- Application / Use Case:
- IC package testing, semiconductor handler fixture, lab test socket
- Features:
- Adjustable clamping screws, spring-loaded components, circular target cavity
- Markings Visible:
- 586135, 586 32, STD QUAL 586, FLAT
- Form Factor:
- Benchtop / Handheld Fixture
- Condition Notes:
- Lot of 4 FM precision IC test fixture jigs. Inspected and in good condition. Light surface wear on machined bodies; clamping hardware and springs appear intact. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
Custom Scientific Stainless Steel Component Holder Stand Industrial Automation
Custom
$65.00Was: $125.00Custom Scientific Stainless Steel Component Holder Stand Industrial Automation LabStainless steel component holder stand with adjustable pivot arm and bolt-down base. Designed for holding and...27003- SKU:
- 27003
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Unbranded
- Model:
- Component Holder Stand
- Type:
- Component Holder / Fixture Stand
- SKU:
- 27003
- Material:
- Stainless Steel / Aluminum Arm
- Base Type:
- Circular Bolt-Down Base
- Mounting:
- Bolt-down round base with 3 mounting holes
- Disc/Wheel Mount:
- Center-hub threaded mount for disc or wheel
- Arm Type:
- Adjustable pivot arm with locking thumbscrew
- Application:
- Industrial Automation, Lab, Assembly Fixture
- Condition:
- Used – Inspected, Pulled from Working Environment
- Seller Notes:
- Sold as pictured; no additional accessories included
- Condition Notes:
- Used stainless steel component holder stand, inspected and in good condition. Pulled from an industrial/lab environment. Shows light surface wear; disc mount and pivot arm intact. No structural damage visible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Wafer Bonder Assembly Lever Component 635177-XD Semiconductor Tool
Custom
$100.00Was: $200.00Wafer Bonder Assembly Lever Component 635177-XD Semiconductor ToolLever component for wafer bonding equipment used in semiconductor fabrication. This machined metal assembly operates as part of the...26998- SKU:
- 26998
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- 635177-XD
- MPN:
- 635177-XD
- Type:
- Wafer Bonder Assembly Lever Component
- SKU:
- 26998
- Condition:
- Used – Inspected and Tested
- Application / Use Case:
- Wafer Bonding Equipment, Semiconductor Fabrication
- Compatible With:
- Wafer Bonder Assembly
- Material:
- Aluminum / Machined Metal
- Form Factor:
- Bench-top fixture component
- Seller Notes:
- Lever component only; no additional accessories included.
- Condition Notes:
- Wafer bonder assembly lever component 635177-XD. Inspected and in good used condition. Lever arm, clamp mechanism, spring, and pivot hardware all present and intact. Minor surface scuffing only.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$100.00Was: $200.00