Motors
-
Yaskawa SGME-04AF14 AC Servo Motor 400W 200V 2.6A 1.27Nm 3000RPM Ins B
Yaskawa
$175.00Was: $350.00Yaskawa SGME-04AF14 AC Servo Motor 400W 200V 2.6A 1.27Nm 3000RPM Ins BThe Yaskawa SGME-04AF14 is a three-phase AC servo motor from Yaskawa Electric Corporation's SGME series, rated at 400W continuous...49407- SKU:
- 49407
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Yaskawa
- Model:
- SGME-04AF14
- MPN:
- SGME-04AF14
- SKU:
- 49407
- Type:
- AC Servo Motor
- Power Rating:
- 400W
- Voltage Rating:
- 200V
- Current Rating:
- 2.6A
- Torque:
- 1.27 N·m
- Speed (RPM):
- 3000 RPM
- Insulation Class:
- Class B
- Series:
- SGME
- Phase:
- Three Phase
- Country/Region of Manufacture:
- Japan
- Manufacture Date:
- December 1997
- Shaft:
- No keyway (keyless shaft)
- Connector:
- Multi-pin encoder and power connectors (attached cable)
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes attached encoder and power cable; no shaft key; housing color may vary
- Condition Notes:
- Yaskawa SGME-04AF14 AC Servo Motor pulled from a working tool. Inspected and in good physical condition. Not powered or tested at our facility — no compatible drive on site. Shaft has no key. Encoder and power cable included. Housing color may vary.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
Marcon 7M04 Oriental Motor AC Synchronous Motor 250VAC Made in Japan
Marcon
$45.00Was: $90.00Marcon 7M04 Oriental Motor AC Synchronous Motor 250VAC Made in JapanThe Marcon 7M04 is a small AC synchronous motor manufactured by Oriental Motor under their Marcon brand, rated at 250VAC. It...47806- SKU:
- 47806
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Marcon
- Model:
- 7M04
- MPN:
- 7M04
- Type:
- AC Synchronous Motor
- SKU:
- 47806
- Voltage Rating:
- 250VAC
- Motor Type:
- AC Synchronous
- Manufacturer:
- Oriental Motor (Marcon)
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Cylindrical with Mounting Bracket
- Lead Wires:
- Two black lead wires with bare ends
- Mounting:
- Flat mounting bracket with two slots
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes motor with mounting bracket and two lead wires.
- Condition Notes:
- Marcon 7M04 Oriental Motor AC synchronous motor, 250VAC. Inspected and in good used condition. Pulled from a working environment. Lead wires and mounting bracket intact. Minor surface marks and oxidation typical of age.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Vexta KBLM6180-A AC Servo Motor w/ KBLD180-A Driver 180W 3000RPM Oriental Motor
Super Vexta
$350.00Was: $700.00Vexta KBLM6180-A AC Servo Motor w/ KBLD180-A Driver 180W 3000RPM Oriental MotorAC servo motor and matching driver unit from Oriental Motor's Vexta line. The motor delivers 180W at 3000 RPM with an...47926- SKU:
- 47926
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 17.00 LBS
- Brand:
- Vexta
- Manufacturer:
- Oriental Motor Co., Ltd.
- Model:
- KBLM6180-A
- MPN:
- KBLM6180-A
- Secondary Model:
- KBLD180-A
- SKU:
- 47926
- Type:
- AC Servo Motor with Driver
- Series:
- VR6
- Condition:
- Used – Inspected
- Seller Notes:
- Includes KBLM6180-A motor, KBLD180-A driver, and interconnect cable
- Country/Region of Manufacture:
- Japan
- Power Rating:
- 180W
- Rated Speed:
- 3000 RPM
- Shaft Diameter:
- 18mm
- Driver Input Voltage:
- AC 100/115V +10% -15%
- Driver Current Rating:
- 10.5A
- Driver Frequency:
- 50/60 Hz
- Driver Model:
- KBLD180-A
- Form Factor:
- Panel Mount / DIN-rail compatible driver
- Compatible With:
- Vexta KBLM6180-A AC Servo Motor
- Condition Notes:
- Vexta KBLM6180-A AC Servo Motor w/ KBLD180-A driver. Inspected, good used condition. Driver is clean. Motor shows surface rust on mounting flange and shaft face — cosmetic. Includes interconnect cable. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$350.00Was: $700.00 -
Oriental Motor Vexta PH596-A-A8 5-Phase Stepping Motor 1.25VDC 2.1A D1754-152
Oriental Motor
$130.00Was: $250.00Oriental Motor Vexta PH596-A-A8 5-Phase Stepping Motor 1.25VDC 2.1A D1754-152The Oriental Motor Vexta PH596-A-A8 is a 5-phase DC stepping motor manufactured by Oriental Motor Co., Ltd. in Japan. It...48763- SKU:
- 48763
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Oriental Motor
- Model:
- PH596-A-A8
- MPN:
- PH596-A-A8
- Secondary Model:
- D1754-152
- Type:
- 5-Phase Stepping Motor with Gear Head
- SKU:
- 48763
- Product Line:
- Vexta
- Number of Phases:
- 5
- Step Angle:
- 0.72 Degrees/Step
- Voltage Rating:
- 1.25V DC
- Current Rating:
- 2.1A
- Winding Resistance:
- 2.1 Ohms
- Gear Head Model:
- D1754-152
- Gear Ratio:
- 1:7.2
- Gear Head Series:
- VX815 603
- Motor Series:
- VX6
- Output Shaft Diameter:
- 12 mm
- Output Shaft Length:
- 25 mm
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes attached multi-conductor wiring harness with connector. Gear head mounted.
- Condition Notes:
- Oriental Motor Vexta PH596-A-A8 5-phase stepping motor with D1754-152 gear head. Inspected; body and gear head intact, label legible, wiring harness present, shaft turns freely. Normal used wear. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$130.00Was: $250.00 -
Japan Servo UIH8S25 25W Induction Motor 110/115VAC 80mm 1250/1550 RPM w/ Cap
Japan Servo Co
$65.00Was: $125.00Japan Servo UIH8S25 25W Induction Motor 110/115VAC 80mm 1250/1550 RPM w/ CapSingle-phase AC induction motor with integral run capacitor and metal mounting base plate. Designed for low-power...48770- SKU:
- 48770
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Japan Servo
- Model:
- UIH8S25
- MPN:
- UIH8S25
- Type:
- Single-Phase AC Induction Motor
- SKU:
- 48770
- Power Rating:
- 25W (24W nominal)
- Voltage Rating:
- 100VAC (50/60Hz) or 110VAC (60Hz)
- Current Rating:
- 0.6A / 0.6A (100V); 0.6A (110V)
- Frequency:
- 50/60 Hz
- Speed (RPM):
- 1250 / 1550 RPM
- Frame Size:
- 80mm x 80mm
- Phase:
- Single Phase
- Run Capacitor:
- 6 uF, 250VAC (100V config); 4 uF (110V config)
- Capacitor Brand:
- SH.MF (visible on capacitor label)
- Capacitor Voltage Rating:
- 250V AC
- Date Code:
- 8930 (visible on motor label — week/year 1989)
- Mounting:
- Metal base plate with pump/gearhead face mount
- Output Connector:
- Two pneumatic push-fit ports on gearhead face
- Lead Configuration:
- Pigtail leads with 2-pin connector
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes attached run capacitor and metal mounting base plate
- Country/Region of Manufacture:
- Japan
- Condition Notes:
- Japan Servo UIH8S25 25W AC induction motor in good used condition. Motor body, gearhead, capacitor, wiring, and base plate all intact with normal wear. Pulled from prior installation. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Magnetek Motor .5 HP 3000 RPM 115/230V 60Hz 1.3/.68A
Magnetek
$90.00Was: $175.00Magnetek Motor.5 HP 3000 RPM 115/230V 60Hz 1.3/.68AThis Magnetek fractional horsepower AC motor is rated for 0.5 HP output at 3000 RPM and operates on 60 Hz single-phase power. The dual-voltage...26751- SKU:
- 26751
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.00 LBS
- Brand:
- MagneTek
- Model:
- Magnetek .5 HP
- Type:
- AC Induction Motor
- SKU:
- 26751
- Horsepower:
- 0.5 HP
- RPM:
- 3000 RPM
- Voltage:
- 115V / 230V
- Phase:
- Single Phase
- Frequency:
- 60 Hz
- Current (Amps):
- 1.3A @ 115V / 0.68A @ 230V
- Motor Type:
- Capacitor Start/Run AC Motor
- Applications:
- HVAC, fans, pumps, compressors, light industrial duty
- Country/Region of Manufacture:
- United States
- Condition:
- New
- Condition Notes:
- Magnetek .5 HP motor, new and unused in original condition. Ready to install and use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$90.00Was: $175.00 -
Yaskawa T08L-TL11 Minertia Mini Series Brushless DC Servo Motor 608618-1 Rev K
Yaskawa Electric
$45.00Was: $90.00Yaskawa T08L-TL11 Minertia Mini Series Brushless DC Servo Motor 608618-1 Rev KBrushless DC servo motor from Yaskawa's Minertia Mini Series. Designed for flange-mount integration in precision motion...40079- SKU:
- 40079
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Yaskawa
- Model:
- T08L-TL11
- MPN:
- 608618-1
- Secondary Model:
- 600013-9
- Hardware Revision:
- Rev K
- Type:
- Brushless DC Servo Motor
- Series:
- Minertia Mini Series
- SKU:
- 40079
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes timing pulley and mounting plate. Does not include brushes.
- Country/Region of Manufacture:
- Japan
- Motor Type:
- Brushless DC Servo
- Form Factor:
- Flange Mount
- Compatible With:
- Yaskawa Minertia Mini Series servo systems
- Condition Notes:
- Yaskawa T08L-TL11 Minertia Mini Series brushless DC servo motor, P/N 608618-1 Rev K. Sold as-is for parts or repair — not tested, no functionality guarantee. Includes timing pulley and mounting plate. Does not include brushes.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Danfoss VLT AutomationDrive 131B1962 7.5kW 10HP VFD FC-302 IP55 380-500V
Danfoss
$625.00Was: $1,300.00Danfoss VLT AutomationDrive 131B1962 7.5kW 10HP VFD FC-302 IP55 380-500VThree-phase variable frequency drive (VFD) for controlling AC induction motors. Rated 7.5kW at 400V or 10HP at 460V with input...44985- SKU:
- 44985
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 100.00 LBS
- Brand:
- Danfoss
- Model:
- 131B1962
- MPN:
- 131B1962
- Secondary Model:
- FC-302
- Type Code:
- FC-302P7K5T5E55H2KGXXXX(S)XXXX4XBXCXGXXXXX
- Type:
- Variable Frequency Drive (VFD) / AC Motor Controller
- SKU:
- 44985
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no manual or accessories included.
- Country/Region of Manufacture:
- Denmark
- Power Rating:
- 7.5 kW (400V) / 10 HP (460V)
- Input Voltage:
- 3x 380-500V AC, 50/60Hz
- Input Current:
- 14.4A (400V) / 13.0A (460V)
- Output Voltage:
- 3x 0 – Vin (variable)
- Output Frequency:
- 0–1000 Hz
- Output Current:
- 16A (400V) / 14.5A (460V)
- Phase:
- Three Phase
- Frequency:
- 50/60 Hz
- Enclosure Rating:
- IP55 / Type 12
- Max Ambient Temperature:
- 45°C / 113°F
- Form Factor:
- Wall-Mount / Panel-Mount
- Control Method:
- VFD – Variable Frequency / Vector Control
- Display:
- Integrated graphical LCP keypad with alphanumeric display
- Certifications:
- CE
- Compatible With:
- 3-phase AC induction motors, HVAC, pump, conveyor, fan loads
- Condition Notes:
- Danfoss VLT AutomationDrive 131B1962 7.5kW VFD. Inspected and in good used condition. Pulled from a working environment where it was in active use. Normal wear; no damage observed. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$625.00Was: $1,300.00 -
Oriental Motor 5IK40GK-A Induction Motor 100VAC 40W 0.8A 10uF 1300/1550 RPM
Oriental Motor
$50.00Was: $100.00Oriental Motor 5IK40GK-A Induction Motor 100VAC 40W 0.8A 10uF 1300/1550 RPMThe Oriental Motor 5IK40GK-A is a single-phase AC induction motor rated at 40 watts and 100VAC. It runs at 1300 RPM on a...48884- SKU:
- 48884
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Oriental Motor
- Model:
- 5IK40GK-A
- MPN:
- 5IK40GK-A2
- SKU:
- 48884
- Type:
- AC Induction Motor
- Voltage Rating:
- 100VAC
- Power Rating:
- 40W
- Current Rating:
- 0.8A
- Capacitance:
- 10 uF
- Speed:
- 1300 RPM (50Hz) / 1550 RPM (60Hz)
- Frequency:
- 50/60Hz
- Phase:
- Single Phase
- Connector Type:
- 3-pin screw terminal connector
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Motor only with attached lead wire and 3-pin connector. No gearhead included.
- Condition Notes:
- Oriental Motor 5IK40GK-A induction motor in good used condition. Pulled from a working environment. Inspected; body, shaft, and connector show light normal wear. Lead wire and 3-pin connector intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$50.00Was: $100.00 -
Yaskawa FELQ-5 3-Phase Induction Motor 0.4kW 200/220V 8-Pole 710-855 RPM JP44
Yaskawa
$250.00Was: $500.00Yaskawa FELQ-5 3-Phase Induction Motor 0.4kW 200/220V 8-Pole 710-855 RPM JP44Three-phase induction motor manufactured by Yaskawa for continuous duty operation. Rated 0.4 kW at dual voltage input...47915- SKU:
- 47915
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 55.00 LBS
- Brand:
- Yaskawa
- Model:
- FELQ-5
- MPN:
- FELQ-5
- Type:
- 3-Phase Induction Motor
- SKU:
- 47915
- Condition:
- Used – Inspected and Tested
- Power Rating:
- 0.4 kW
- Voltage Rating:
- 200/220 VAC
- Phase:
- Three Phase
- Frequency:
- 50/60 Hz
- Current Rating (Amps):
- 3.1A @ 200V 50Hz; 2.7A @ 200V 60Hz; 2.8A @ 220V 60Hz
- Speed (RPM):
- 710 RPM (50Hz) / 845-855 RPM (60Hz)
- Number of Poles:
- 8
- Duty Rating:
- Continuous (CONT)
- Insulation Class:
- Class E
- Frame Size:
- 90L
- Standard:
- JIS C 4004
- Enclosure Type:
- JP44
- Vibration Grade:
- V-
- Bearing No.:
- 6205ZZ (both ends)
- Shaft Diameter:
- 25 mm (15/16 in)
- Mounting:
- Flange Mount
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Includes attached lead wires. Motor only — no gearbox or drive.
- Condition Notes:
- Yaskawa FELQ-5 3-Phase Induction Motor tested good at our facility — powers on, spins very smoothly at 208 VAC. Good used condition; junction box and leads intact. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
Vexta KBLM6180GD-A AC Servo Motor H0012-162 Gear Head 1:3.043 w/ KBLD180-A
Super Vexta
$400.00Was: $800.00Vexta KBLM6180GD-A AC Servo Motor H0012-162 Gear Head 1:3.043 w/ KBLD180-AAC servo motor assembly manufactured by Vexta (Oriental Motor Co., Ltd.) with integrated gear head and external driver...47792- SKU:
- 47792
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 20.00 LBS
- Brand:
- Vexta (Oriental Motor Co., Ltd.)
- Model:
- KBLM6180GD-A
- Secondary Model:
- KBLD180-A
- MPN:
- KBLM6180GD-A
- Type:
- AC Servo Motor with Gear Head and Driver
- SKU:
- 47792
- Seller Notes:
- Includes KBLD180-A servo driver, H0012-162 gear head, and interconnect cable.
- Country/Region of Manufacture:
- Japan
- Motor Model:
- KBLM6180GD-A
- Driver Model:
- KBLD180-A
- Gear Head Model:
- H0012-162
- Gear Ratio:
- 1:3.043
- Rated Output Power:
- 180W
- Rated Speed:
- 3000 RPM
- Driver Input Voltage:
- AC 100/115V +10% -15%
- Driver Input Frequency:
- 50/60 Hz
- Driver Input Current:
- 10.5A
- Shaft Diameter:
- 18mm
- Version / Revision:
- VR6 13021 B
- Motor Type:
- AC Servo Motor
- Form Factor:
- Inline Gear Head Motor with External Driver
- Condition:
- Used – Inspected and in Good Condition
- Compatible With:
- Vexta Super Vexta AC servo systems
- Control Interface:
- Terminal block: Stop/Start, Brake/Start, CCW/CW, Speed Select 1/2
- Driver Outputs:
- Speed Out ASG, Speed Out BSG, Alarm Out
- Condition Notes:
- Vexta KBLM6180GD-A AC servo motor with KBLD180-A driver inspected and in good used condition. Minor surface marks on motor housing; light oxidation on gear head plate. Includes interconnect cable. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$400.00Was: $800.00 -
Gong Tzyh BHE50 Speed Reducer Yaskawa SGML-04AF14 AC Servo Motor 1:30 400W
Gong TZYH
$275.00Was: $550.00Gong Tzyh BHE50 Speed Reducer Yaskawa SGML-04AF14 AC Servo Motor 1:30 400WThis is a combined assembly consisting of a Gong Tzyh BHE50 worm gear speed reducer made by Taiwan Gong Ji Chang Co., Ltd.,...47490- SKU:
- 47490
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 19.00 LBS
- Brand:
- Gong Tzyh / Yaskawa
- Model:
- BHE50
- MPN:
- SGML-04AF14
- Secondary Model:
- SGML-04AF14
- Type:
- AC Servo Motor with Worm Gear Speed Reducer
- SKU:
- 47490
- Speed Reducer Model:
- BHE50
- Speed Reducer Manufacturer:
- Taiwan Gong Ji Chang Co., Ltd.
- Servo Motor Model:
- SGML-04AF14
- Servo Motor Manufacturer:
- Yaskawa Electric Corporation
- Gear Ratio:
- 1:30
- Power Rating:
- 400W (1/2 HP)
- Voltage Rating:
- 200V
- Current Rating:
- 2.6A
- Torque:
- 1.27 N·m
- Motor Speed:
- 3000 r/min
- Insulation Class:
- Class B
- Reducer Type:
- AR (Right Angle Worm Gear)
- Output:
- Toothed timing pulley on output shaft
- Connector Type:
- Multi-pin AMP/Molex-style connectors (pigtail leads)
- Mounting:
- Aluminum base plate
- O/N (Order Number):
- R10389-322-2
- Country/Region of Manufacture:
- Taiwan (reducer); Japan (servo motor)
- Seller Notes:
- Reducer and servo motor mounted on aluminum base plate; timing pulley on output shaft included
- Condition Notes:
- Gong Tzyh BHE50 speed reducer with Yaskawa SGML-04AF14 AC servo motor. Inspected and in good used condition. Minor surface wear and light rust on base plate. Output timing pulley and wiring harness intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
NSK YS2020FN001 6-Slot Rotating Tray Motor w/ EX-13EAD Sensors 10cm Dia
NSK
$650.00Was: $1,300.00NSK YS2020FN001 6-Slot Rotating Tray Motor w/ EX-13EAD Sensors 10cm DiaThe NSK YS2020FN001 is a precision rotary indexing motor assembly equipped with a 6-slot aluminum sample tray and OMRON EX-13EAD...46794- SKU:
- 46794
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 63.00 LBS
- Brand:
- NSK
- Model:
- YS2020FN001
- MPN:
- YS2020FN001
- Secondary Model:
- EX-13EAD
- SKU:
- 46794
- Type:
- Rotary Indexing Tray Motor with Position Sensors
- Number of Slots:
- 6
- Tray Diameter:
- 10 cm
- Rotation:
- Full 360°
- Sensor Model:
- EX-13EAD
- Sensor Type:
- Position / Home Sensor
- Tray Material:
- Aluminum
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Includes EX-13EAD sensors and wiring harness with multi-pin connectors
- Form Factor:
- Standalone Assembly
- Application:
- Semiconductor / Lab Automation / Sample Indexing
- Connector Type:
- Multi-pin inline connector; DB-style connector on harness
- Condition Notes:
- NSK YS2020FN001 6-slot rotating tray motor. Inspected and in good condition. Motor body shows surface rust on lower housing and base plate. Aluminum tray and sensors intact. Wiring harness included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$650.00Was: $1,300.00 -
Oriental Motor MSM540-412 Speed Control Motor 40W 200V 50/60Hz 90-1700 RPM
Oriental Motor
$80.00Was: $150.00Oriental Motor MSM540-412 Speed Control Motor 40W 200V 50/60Hz 90-1700 RPMSingle-phase speed control motor manufactured by Oriental Motor. Delivers 40W output with variable speed capability across...46755- SKU:
- 46755
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Oriental Motor
- Model:
- MSM540-412
- MPN:
- MSM540-412
- Type:
- Speed Control Motor
- SKU:
- 46755
- Seller Notes:
- Includes attached lead wires with spade connectors
- Country/Region of Manufacture:
- Japan
- Power Rating:
- 40W Maximum Output
- Voltage Rating:
- 200V
- Current Rating:
- 0.75A
- Frequency:
- 50/60Hz
- Speed Range:
- 90–1400 RPM (50Hz) / 90–1700 RPM (60Hz)
- Capacitor:
- 3.5 µF
- Duty Cycle:
- 30 min
- Phase:
- Single Phase
- Motor Series:
- SC Speed Control Series
- Output Shaft:
- Toothed / timing pulley output shaft
- Mounting:
- Face mount with base bracket
- Form Factor:
- Compact enclosed motor with gearhead
- Condition Notes:
- Oriental Motor MSM540-412 Speed Control Motor, used, pulled from a working environment. Inspected and in good condition. Motor body clean with minor wear; output shaft and lead wires intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$80.00Was: $150.00 -
Parker Compumotor BE232FJ-NTQN Servo Motor Bayside PX23-015 15:1 Gearbox OEM770T
Parker
$533.00Was: $850.00Parker Compumotor BE232FJ-NTQN Servo Motor Bayside PX23-015 15:1 Gearbox OEM770T Brushless servo motor assembly with integrated 15:1 planetary gearbox and standalone servo drive. Designed for motion...46230- SKU:
- 46230
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 15.00 LBS
- Brand:
- Parker / Parker Compumotor
- Model:
- BE232FJ-NTQN
- MPN:
- BE232FJ-NTQN
- Secondary Model:
- OEM770T
- Type:
- Servo Motor with Planetary Gearbox and Servo Drive
- SKU:
- 46230
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes Bayside PX23-015 15:1 gearbox, OEM770T servo drive, and cables
- Country/Region of Manufacture:
- USA (Bayside gearbox: Made in USA per label)
- Voltage Rating:
- 340V
- Current Rating:
- 3.4 Amps
- Torque Rating:
- 143 oz-in
- Gear Ratio:
- 15:1
- Gearbox Brand:
- Bayside
- Gearbox Part Number:
- PX23-015
- Gearbox Mounting:
- MX60-015-033
- Servo Drive Model:
- OEM Series / OEM770T
- Servo Drive Brand:
- Parker Compumotor
- Drive Mode:
- Servo Drive / Torque
- Includes Cables:
- Yes
- Motor Series:
- BE Series (Brushless)
- Application:
- Motion control, automation, robotics, CNC
- Form Factor:
- Inline motor/gearbox assembly with standalone drive
- Compatible With:
- Parker Compumotor OEM Series motion control systems
- Condition Notes:
- Parker Compumotor BE232FJ-NTQN servo motor with Bayside PX23-015 15:1 gearbox and OEM770T drive. Inspected, in good condition. Pulled from a working environment where it was in use. Cables included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$533.00Was: $850.00 -
Dayton 4FN65 3HP Premium Efficiency Motor 230/460V 3Ph TEFC 182T Frame 3530 RPM
Dayton
$290.00Was: $575.00Dayton 4FN65 3HP Premium Efficiency Motor 230/460V 3Ph TEFC 182T Frame 3530 RPMThe Dayton 4FN65 is a 3HP three-phase premium efficiency electric motor designed for a wide range of industrial and...45061- SKU:
- 45061
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 135.00 LBS
- Brand:
- Dayton
- Model:
- 4FN65
- MPN:
- 4FN65
- Type:
- Three-Phase TEFC Induction Motor
- SKU:
- 45061
- Horsepower:
- 3 HP
- Voltage:
- 230/460V AC
- Current:
- 8.0A / 4.0A
- Phase:
- 3-Phase
- Frequency:
- 60 Hz
- RPM:
- 3530
- Frame Size:
- 182T
- Motor Type:
- CTE (C-Face TEFC)
- Enclosure:
- TEFC (Totally Enclosed Fan Cooled)
- Bearings:
- Ball Bearings
- Ambient Temperature:
- 40°C
- NEMA Design:
- B
- Insulation Class:
- F
- Service Factor:
- 1.15
- Shaft Height:
- 4-1/2 inch
- Efficiency:
- Premium Efficiency
- Country/Region of Manufacture:
- Mexico
- Seller Notes:
- Includes mounting base, sheave/V-belt pulley, Browning QD bushing (3X483, P1 1-7/8), and installation/maintenance guide. New, never installed.
- Condition:
- New – Open Box / Never Installed
- Compatible With:
- NEMA 182T frame applications; pumps, compressors, fans, conveyors
- Form Factor:
- Foot Mount / C-Face
- Power Requirements:
- 230/460V AC, 3-Phase, 60 Hz
- Condition Notes:
- Dayton 4FN65 3HP 3-Phase TEFC Motor. New, never installed, out of original box. Untested at our facility; testing available on request. Includes mounting base, sheave pulley, Browning QD bushing (3X483), and installation guide.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$290.00Was: $575.00 -
Emoteq QS05600 Allied Motion Brushless Servo Motor with Lovejoy Coupling
Emoteq
$150.00Was: $300.00Emoteq QS05600 Allied Motion Brushless Servo Motor with Lovejoy CouplingBrushless DC servo motor from Allied Motion's QS series. NEMA-style square flange mount configuration with integrated Lovejoy...43917- SKU:
- 43917
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 17.00 LBS
- Brand:
- Emoteq / Allied Motion
- Model:
- QS05600
- MPN:
- QS05600
- Type:
- Brushless Servo Motor
- SKU:
- 43917
- Condition:
- Used – Inspected
- Seller Notes:
- Includes Lovejoy flexible jaw coupling on output shaft
- Country/Region of Manufacture:
- United States
- Motor Technology:
- Brushless DC (BLDC)
- Coupling Type:
- Lovejoy Flexible Jaw Coupling
- Mounting Style:
- Flange Mount
- Lead/Wire Type:
- Flying leads (multi-conductor wire harness)
- Series:
- QS Series
- Compatible With:
- Servo drives compatible with Allied Motion QS series motors
- Form Factor:
- NEMA-style square flange frame
- Condition Notes:
- Emoteq QS05600 Allied Motion brushless servo motor, inspected and in good condition. Aluminum frame intact with light handling marks. Lovejoy coupling present. Rear shaft boss shows minor surface rust. Wire harness intact, all leads present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Emoteq QS05600-B02-H Brushless DC Servo Motor 3-Phase Allied Motion USA
Emoteq
$125.00Was: $250.00Emoteq QS05600-B02-H Brushless DC Servo Motor 3-Phase Allied Motion USAThree-phase brushless DC servo motor manufactured by Allied Motion Technologies. Provides controlled rotational output with Hall...43916- SKU:
- 43916
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 17.00 LBS
- Brand:
- Emoteq
- Model:
- QS05600-B02-H
- MPN:
- QS05600-B02-H
- Type:
- Brushless DC Servo Motor
- SKU:
- 43916
- Phase:
- 3-Phase
- Voltage Type:
- DC (Volts DC)
- Feedback Type:
- Hall Effect Sensors (3-channel)
- Motor Technology:
- Brushless DC (BLDC)
- Shaft Coupling:
- Lovejoy jaw-style flexible coupling
- Wire Leads:
- Flying leads — 3 phase + Hall sensor wires
- Hall Sensor Wires:
- GRN=Hall GND, BLU=Hall +5V, BRN=Hall 1, ORG=Hall 2, YEL=Hall 3
- Phase Wires:
- RED=Phase 1, WHT=Phase 2, BLK=Phase 3
- Country/Region of Manufacture:
- United States
- Manufacturer (current):
- Allied Motion Technologies
- Condition:
- Used – Inspected
- Seller Notes:
- Motor only with Lovejoy coupling on shaft; flying wire leads, no connector.
- Condition Notes:
- Emoteq QS05600-B02-H brushless DC servo motor, inspected and in good condition. Housing shows surface scuffs; light oxidation around rear bearing race. Lovejoy coupling present on shaft. All wire leads intact, bare-ended. No connector included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
General Electric 7GP358MA3AA Variable Speed Motor w/ Gearbox 26.56:1 480VAC
General Electric
$550.00Was: $1,100.00General Electric 7GP358MA3AA Variable Speed Motor w/ Gearbox 26.56:1 480VACThree-phase industrial variable speed motor with integrated gearbox and Polydyne belt drive. Designed for applications...42132- SKU:
- 42132
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 605.00 LBS
- Brand:
- General Electric
- Model:
- 7GP358MA3AA
- MPN:
- 7GP358MA3AA
- Secondary Model:
- 7GP249JU3PA
- SKU:
- 42132
- Type:
- Variable Speed Motor with Gearbox
- Voltage Rating:
- 480VAC
- Gear Ratio:
- 26.56:1
- Speed Range:
- 20 RPM to 120 RPM (approximate)
- Speed Control:
- Adjustable dial — adjust only when running
- Drive Type:
- Polydyne Variable Speed Belt Drive
- Belt:
- GE Polydyne Belt No. 3
- Output Configuration:
- Belt-driven output pulley
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Tested at 480VAC; runs smooth and quiet through full speed range
- Country/Region of Manufacture:
- United States
- Form Factor:
- Base-mounted industrial unit on steel base plate
- Condition Notes:
- GE 7GP358MA3AA variable speed motor w/ gearbox tested at 480VAC — runs smooth and quiet; speed adjustment works through all speeds. Shows heavy surface rust/corrosion from age and storage. Mechanically sound per our testing.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$550.00Was: $1,100.00 -
Oriental Motor 5IK40GK-A2 Induction Motor 40W 100V 50/60Hz 1300/1550 RPM
Oriental Motor
$75.00Was: $150.00Oriental Motor 5IK40GK-A2 Induction Motor 40W 100V 50/60Hz 1300/1550 RPMSingle-phase AC induction motor with integrated gearhead and sprocket/chain drive output. Rated 40W at 100V, 50/60Hz operation...41782- SKU:
- 41782
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 7.00 LBS
- Brand:
- Oriental Motor
- Model:
- 5IK40GK-A2
- MPN:
- 5IK40GK-A2
- Type:
- AC Induction Motor with Gearhead
- SKU:
- 41782
- Power Rating:
- 40W
- Voltage Rating:
- 100V AC
- Current Rating:
- 0.8A
- Frequency:
- 50/60Hz
- Speed (RPM):
- 1300 RPM (60Hz) / 1550 RPM (50Hz)
- Capacitor:
- 10µF
- Phase:
- Single Phase
- Output Configuration:
- With Gearhead
- Drive Type:
- Sprocket / Chain Drive Output
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes attached multi-pin connector lead wiring harness
- Condition Notes:
- Oriental Motor 5IK40GK-A2 induction motor with gearhead. Inspected, in good used condition. Pulled from a working environment where it was in active use. Wiring harness and connector intact. Normal wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00