ICP DAS
-
ICP DAS i-2541 RS-232/422/485 to Fiber Optic Converter DIN-Rail 300-115200 bps
ICP DAS
$130.00Was: $250.00ICP DAS i-2541 RS-232/422/485 to Fiber Optic Converter DIN-Rail 300-115200 bpsIndustrial serial-to-fiber converter that bridges RS-232, RS-422, and RS-485 devices to fiber optic networks. Converts...52540- SKU:
- 52540
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- ICP DAS
- Model:
- i-2541
- MPN:
- i-2541
- SKU:
- 52540
- Type:
- RS-232/422/485 to Fiber Optic Converter
- Interface Type:
- RS-232, RS-422, RS-485
- Fiber Port Type:
- ST (Multi-mode)
- Fiber Cable Type:
- 50/125, 62.5/125, 100/140 µm
- Wavelength:
- 850 nm
- Data Rate:
- 300 – 115200 bps (auto-switching)
- Transmission Distance:
- Up to 2 km (6,600 ft)
- Power Requirements:
- Unregulated +10 VDC to +30 VDC
- Power Consumption:
- 2.0 W max
- Isolation Voltage:
- 3000 Vdc
- Optical Isolation:
- 3570 Vrms
- Form Factor:
- DIN-Rail Mount
- ESD Protection:
- Yes — RS-232/422/485 data lines
- LED Indicators:
- Power, TD, RD
- Serial Terminals:
- 8-position screw terminal block (orange)
- Power Terminals:
- 3-position screw terminal block (F.G., GND, +VS)
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- Taiwan
- Compatible With:
- RS-232/422/485 point-to-point and RS-485 multi-drop systems
- Seller Notes:
- Unit only — no accessories included. Pulled from a working environment.
- Condition Notes:
- ICP DAS i-2541 fiber optic converter — inspected, in good used condition. Pulled from a working environment where it was in use and functional. Terminal blocks and fiber port intact. Normal light wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$130.00Was: $250.00 -
ICP DAS VPD-143 Industrial Control Enclosure IP66 24VDC Relays Ethernet PLC
ICP DAS
$446.00Was: $900.00ICP DAS VPD-143 Industrial Control Enclosure IP66 24VDC Relays Ethernet PLCThis is a custom-built industrial control panel housed in an IDE POL605023 IP66-rated polyester enclosure. The enclosure is...50348- SKU:
- 50348
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 44.00 LBS
- Brand:
- ICP DAS
- Model:
- VPD-143
- MPN:
- POL605023
- Type:
- Industrial Control Panel Enclosure
- SKU:
- 50348
- Enclosure Model:
- IDE POL605023 Polyester Enclosure
- Enclosure Rating:
- IP66
- Backing Plate:
- IDE PML6050 Metal Backing Plate
- HMI / Touchscreen:
- ICP DAS VPD-143 4.3" Color Touch LCD
- I/O Module:
- ICP DAS M-7055D 8-Ch DI / 8-Ch DO, 16-bit Counters
- Ethernet Switch:
- ICP DAS Unmanaged 5-Port 10/100 Mbps Industrial
- Circuit Breakers:
- 2x Shihlin BHA 32, 3x Shihlin BHA 33
- Relays:
- 16x ETR2HN 24VDC
- Magnetic Contactors:
- 3x Shihlin S-P11
- Power Supplies:
- 2x Mean Well MDR-60-24, 60W, 24V, 2.5A DIN-Rail
- Power Supply Input Voltage:
- 100-240V AC, 50/60Hz
- Power Supply Output Voltage:
- 24V DC
- Power Supply Output Current:
- 2.5A per unit
- Relay Voltage:
- 24VDC
- Number of Relay Outputs:
- 16
- Digital Inputs:
- 8-Ch Isolated
- Digital Outputs:
- 8-Ch Isolated
- Network Interface:
- 10/100 Mbps Ethernet (5-port unmanaged switch)
- Management Type:
- Unmanaged
- Dimensions:
- 26" x 20" x 11"
- Form Factor:
- Wall-Mount / Floor-Mount Enclosure
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Complete pre-wired enclosure with all components installed as listed
- Country/Region of Manufacture:
- Taiwan
- Condition Notes:
- This ICP DAS VPD-143 Industrial Control Panel Enclosure is in good used condition, pulled from a working environment where it was in active use and functional. All listed components are installed and present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$446.00Was: $900.00 -
ICP DAS XP-8741 XP-8000 Series Embedded PLC Industrial PC Win Embedded 2009
ICP DAS
$175.00Was: $350.00ICP DAS XP-8741 XP-8000 Series Embedded PLC Industrial PC Win Embedded 2009 Compact embedded industrial PC and programmable logic controller from Taiwan manufacturer ICP DAS. Designed for factory...49545- SKU:
- 49545
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- ICP DAS
- Model:
- XP-8741
- MPN:
- XP-8741
- Secondary Model:
- XP-8000
- SKU:
- 49545
- Type:
- PLC Embedded Industrial PC
- Series:
- XP-8000 / XPAC
- Form Factor:
- Desktop / DIN-Rail
- Expansion Slots:
- 7 I/O module slots (visible on backplane)
- Interfaces:
- 2x LAN (10/100M), VGA, 2x USB, COM (RS-232/RS-485), CF slot
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Does not power on. DC power input connector broken off PCB. Sold AS-IS.
- Country/Region of Manufacture:
- Taiwan
- Condition Notes:
- This ICP DAS XP-8741 XP-8000 Series PLC Embedded Industrial PC does not power on and is being sold strictly AS-IS for parts or repair. The orange 10-pin DC power input connector has broken off the circuit board; this connector may be replaceable by
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
ICP DAS i-87018Z 10-Ch Thermocouple Input Module High OVP w/ DB-1820 Board
ICP DAS
$400.00Was: $800.00ICP DAS i-87018Z 10-Ch Thermocouple Input Module High OVP w/ DB-1820 BoardThe ICP DAS i-87018Z is a 10-channel thermocouple input module designed for use in ICP DAS i-8000 series and i-87K series...49506- SKU:
- 49506
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- ICP DAS
- Model:
- i-87018Z
- MPN:
- i-87018Z
- Secondary Model:
- DB-1820
- SKU:
- 49506
- Type:
- Thermocouple Input Module
- Number of Channels:
- 10
- Over-Voltage Protection:
- Yes – High Over-Voltage Protection
- Included Accessories:
- DB-1820 Daughter Board
- Form Factor:
- Module / Card
- Compatible With:
- ICP DAS i-8000 Series, i-87K Series Backplanes
- Interface:
- Backplane Bus (i-8000/i-87K slot)
- Connector Type:
- DB-1820 screw-terminal daughter board (24-pin)
- Thermocouple Types Supported:
- J, K, T, E, R, S, B, N (per i-87018Z spec)
- PCB Revision:
- Rev 1.3
- Condition:
- Used – Inspected
- Country/Region of Manufacture:
- Taiwan
- Seller Notes:
- Includes DB-1820 daughter board with screw-terminal connections
- Condition Notes:
- ICP DAS i-87018Z 10-Ch Thermocouple Input Module inspected and in good used condition. Includes DB-1820 daughter board. Normal handling wear. No visible damage to housing, PCB, or terminals.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$400.00Was: $800.00 -
ICP DAS i-87018ZW 10-Ch Thermocouple Analog Input Module w/ DB-1820
ICP DAS
$155.00Was: $300.00ICP DAS i-87018ZW 10-Ch Thermocouple Analog Input Module w/ DB-1820The ICP DAS i-87018ZW is a 10-channel analog thermocouple input module designed for use in the ICP DAS I-87K and I-8000 series...49505- SKU:
- 49505
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- ICP DAS
- Model:
- i-87018ZW
- MPN:
- i-87018ZW
- Secondary Model:
- DB-1820
- SKU:
- 49505
- Type:
- Analog Thermocouple Input Module
- Number of Channels:
- 10
- Input Type:
- Thermocouple / Analog Voltage
- Over Voltage Protection:
- Yes — High Over Voltage Protection
- Daughter Board:
- DB-1820
- Board Revision:
- Rev 16 CR
- Interface:
- I-8000 / I-87K Backplane Bus
- Protocol:
- DCON / Modbus RTU
- Form Factor:
- Plug-in Module (I-87K Series)
- Connector Type:
- Screw Terminal (via DB-1820 daughter board)
- RoHS Compliant:
- Yes
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes DB-1820 daughter board with screw terminal wiring block
- Country/Region of Manufacture:
- Taiwan
- Condition Notes:
- Used ICP DAS i-87018ZW thermocouple input module with DB-1820. Inspected, in good condition. Pulled from a working environment where it was in active use and functional. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$155.00Was: $300.00 -
ICP DAS i-87017W 8-Channel Analog Input Module +/-10V +/-5V +/-1V 20mA I-87K
ICP DAS
$165.00Was: $325.00ICP DAS i-87017W 8-Channel Analog Input Module +/-10V +/-5V +/-1V 20mA I-87KAn 8-channel analog input module designed for the ICP DAS I-87K and I-8K series I/O expansion racks. This card converts...49504- SKU:
- 49504
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- ICP DAS
- Model:
- i-87017W
- MPN:
- i-87017W
- SKU:
- 49504
- Type:
- 8-Channel Analog Input Module
- Series:
- I-87K
- Number of Channels:
- 8
- Input Type:
- Voltage and Current (±10V, ±5V, ±1V, ±500mV, ±150mV, ±20mA)
- Voltage Input Range 1:
- ±10V
- Voltage Input Range 2:
- ±5V
- Voltage Input Range 3:
- ±1V
- Voltage Input Range 4:
- ±500mV
- Voltage Input Range 5:
- ±150mV
- Current Input Range:
- -20mA to +20mA
- Form Factor:
- Card/Module
- Interface:
- I-87K backplane / DCON protocol
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Module only; pulled from a working environment
- Country/Region of Manufacture:
- Taiwan
- Compatible With:
- ICP DAS I-87K, I-8K series I/O expansion racks
- Certifications:
- CE
- Condition Notes:
- ICP DAS i-87017W 8-Channel Analog Input Module. Used, inspected, in good condition. Pulled from a working environment where it was in active use. Housing clean with minor wear; terminal block and PCB intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$165.00Was: $325.00 -
ICP DAS I-87054W 8-Channel PWM Output 8-Channel Isolated DI Module
ICP DAS
$140.00Was: $275.00ICP DAS I-87054W 8-Channel PWM Output 8-Channel Isolated DI ModuleThe ICP DAS I-87054W is a combination digital I/O module that integrates 8 channels of PWM (Pulse Width Modulation) output with 8...49503- SKU:
- 49503
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- ICP DAS
- Model:
- I-87054W
- MPN:
- I-87054W
- Type:
- PWM Output / Isolated Digital Input I/O Module
- SKU:
- 49503
- Number of Output Channels:
- 8
- Number of Input Channels:
- 8
- Output Type:
- PWM (Pulse Width Modulation)
- Input Type:
- Isolated Digital Input (DI)
- Series:
- I-87K
- Compatible With:
- ICP DAS I-8000, I-87K backplane systems
- Form Factor:
- Card/Module
- Interface:
- I-87K bus backplane connector
- Connector Type:
- Screw terminal (orange), backplane bus connector
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Module only; no additional accessories included.
- Country/Region of Manufacture:
- Taiwan
- Condition Notes:
- ICP DAS I-87054W PWM/DI module inspected and in good condition. Terminal block and backplane connector intact, PCB shows no damage. Normal light wear from prior use. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$140.00Was: $275.00 -
ICP DAS i-8088W 8-Ch PWM Output 8-Ch Isolated DI Module i-8000 Series PLC
ICP DAS
$250.00Was: $500.00ICP DAS i-8088W 8-Ch PWM Output 8-Ch Isolated DI Module i-8000 Series PLCThe ICP DAS i-8088W is a combination I/O module providing 8 channels of PWM (Pulse Width Modulation) output and 8 channels of...49502- SKU:
- 49502
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- ICP DAS
- Model:
- i-8088W
- MPN:
- i-8088W
- Type:
- PWM Output & Isolated Digital Input Module
- SKU:
- 49502
- Number of PWM Output Channels:
- 8
- Number of DI Channels:
- 8
- Input Type:
- Isolated Digital Input (DI)
- Output Type:
- PWM (Pulse Width Modulation)
- Compatible With:
- ICP DAS i-8000 Series PAC/PLC Backplane
- Form Factor:
- Module / Card
- Interface:
- i-8000 Series Backplane Connector
- Application:
- Industrial Automation, Motion Control, PLC I/O
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Module only; pulled from working environment
- Country/Region of Manufacture:
- Taiwan
- Condition Notes:
- ICP DAS i-8088W PWM/DI module inspected and in good used condition. Pulled from a working environment where it was in active use and functional. Terminal block and backplane connector intact. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
ICP DAS I-8041W 32-Channel Isolated Digital Output Module I-8000 Series
ICP DAS
$120.00Was: $250.00ICP DAS I-8041W 32-Channel Isolated Digital Output Module I-8000 SeriesThe ICP DAS I-8041W is a 32-channel optically isolated digital output module designed for use with the ICP DAS I-8000 series...49500- SKU:
- 49500
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- ICP DAS
- Model:
- I-8041W
- MPN:
- I-8041W
- Type:
- Isolated Digital Output Module
- SKU:
- 49500
- Number of Channels:
- 32
- Channel Type:
- Digital Output (DO)
- Isolation:
- Optically Isolated
- Connector Type:
- DB37 (D-Sub 37-pin)
- Form Factor:
- Card/Module
- Compatible With:
- ICP DAS I-8000 Series PAC Backplane
- Bus Interface:
- I-8000 Series Parallel Bus
- Certifications:
- CE
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Module only; inspected and in good condition.
- Country/Region of Manufacture:
- Taiwan
- Condition Notes:
- ICP DAS I-8041W 32-Ch Isolated Digital Output Module. Inspected and in good condition. Housing intact, DB37 and bus connectors clean. Normal light handling wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$120.00Was: $250.00 -
ICP DAS I-8KE8-G Embedded Ethernet I/O Unit PLC 8-Slot B884 Backplane 10BaseT
ICP DAS
$600.00Was: $1,200.00ICP DAS I-8KE8-G Embedded Ethernet I/O Unit PLC 8-Slot B884 Backplane 10BaseTCompact Ethernet-based programmable logic controller with integrated I/O expansion capability. The I-8KE8-G controller...49497- SKU:
- 49497
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- ICP DAS
- Model:
- I-8KE8-G
- MPN:
- I-8KE8-G
- Secondary Model:
- B884
- Type:
- Embedded Ethernet I/O Unit PLC
- SKU:
- 49497
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes I-8KE8-G controller unit and B884 8-slot backplane with I/O modules installed
- Country/Region of Manufacture:
- Taiwan
- Form Factor:
- DIN Rail / Desktop
- Number of Slots:
- 8
- Ethernet Interface:
- 10BaseT (NE2000 Compatible)
- Communication Speed:
- 115200 bps (fixed)
- CPU:
- 80186-80 or compatible
- Serial Interface:
- RS-232 (COM1)
- Display:
- 5-digit 7-segment LED
- Front Panel Controls:
- MODE, UP, DOWN, SET buttons; L1, L2, L3, POWER LEDs
- Backplane Model:
- B884 (8-slot)
- Standards:
- CE, RoHS
- Compatible With:
- ICP DAS I-8K series I/O expansion modules
- Condition Notes:
- ICP DAS I-8KE8-G Ethernet I/O PLC with B884 8-slot backplane. Inspected, in good used condition. Pulled from a working environment where it was in active use. Light surface wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
ICP DAS XPAC XP-8741 PLC Embedded Industrial PC AMD LX800 500MHz 7-Slot
ICP DAS
$275.00Was: $550.00ICP DAS XPAC XP-8741 PLC Embedded Industrial PC AMD LX800 500MHz 7-SlotThe ICP DAS XPAC XP-8741 is a compact, ruggedized embedded industrial PC built around the AMD LX800 500MHz 32-bit processor and...49496- SKU:
- 49496
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 7.00 LBS
- Brand:
- ICP DAS
- Model:
- XP-8741
- MPN:
- XP-8741
- Type:
- PLC Embedded Industrial PC
- SKU:
- 49496
- Series:
- XP-8000
- Product Line:
- XPAC
- Processor:
- AMD LX800 500MHz (32-bit)
- System RAM:
- 1 GB
- Storage:
- 4 GB CF Card (Compact Flash)
- Expansion Slots:
- 7 Open I/O Slots
- Software Included:
- SQL Server 2005 Express Edition
- Form Factor:
- DIN Rail / Desktop Industrial
- Backplane:
- 7-slot XP-8000 series I/O backplane
- Connectivity:
- Ethernet, USB, VGA, RS-232, RS-485
- Country/Region of Manufacture:
- Taiwan
- Condition:
- Used – Partially Tested
- Seller Notes:
- Windows OS is locked; end user must reset. Unit partially tested.
- Condition Notes:
- ICP DAS XP-8741 XPAC industrial PC partially tested. Windows OS is locked and must be reset by end user before use. Hardware powered up. Shows typical used wear. Unit only; please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00