Description
ICP DAS I-87054W 8-Channel PWM Output 8-Channel Isolated DI Module
The ICP DAS I-87054W is a combination digital I/O module that integrates 8 channels of PWM (Pulse Width Modulation) output with 8 channels of optically isolated digital input. Designed for the ICP DAS I-87K high-profile module series, it slots into I-8000 series backplane systems and is used for precise digital control and signal acquisition in industrial automation applications. The isolated digital inputs protect the control system from high-voltage transients on the field side, while the PWM outputs allow variable duty-cycle control of loads such as motors, solenoids, and LED drivers.
Specifications & What's Included
- Model: ICP DAS I-87054W
- Series: I-87K (high-profile I/O module)
- PWM Output Channels: 8 (D/O 0–7)
- Isolated Digital Input Channels: 8 (DI 0–4 visible on label; DI COM referenced)
- Output Type: PWM (Pulse Width Modulation) digital output
- Input Type: Optically isolated digital input (DI)
- Connector: Orange screw terminal block (field wiring); backplane bus connector (system side)
- Compatible Backplanes: ICP DAS I-8000 series, I-87K compatible systems
- PCB: Green PCB with surface-mount components; CE marking visible on board label
- Form Factor: Card/module (slots into I-87K backplane)
- Country of Manufacture: Taiwan
- Included: Module only
Applications
The I-87054W is used in distributed industrial control systems built around ICP DAS I-8000 or I-87K programmable automation controllers (PACs). PWM output modules like this one are commonly found in process control, factory automation, motion control, and building automation applications where variable-power control of actuators, motors, or lighting is required. The isolated digital inputs are well suited for reading dry-contact signals, limit switches, sensors, and pushbuttons in noisy industrial environments where ground-loop isolation is important. ICP DAS introduced the I-87K series in the 2000s as a high-density, hot-swappable I/O solution for their PAC platforms, and these modules remain in active use in legacy and current ICP DAS-based automation installations worldwide. System integrators maintaining or expanding existing ICP DAS I-8000 control architectures will find this module a direct-fit replacement or expansion component.
This ICP DAS I-87054W 8-Channel PWM Output and Isolated Digital Input Module has been inspected and appears to be in good condition. The terminal block, backplane connector, and PCB all look intact with no visible damage. The unit shows normal light wear consistent with prior installation use. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
ICP DAS |
Model: |
I-87054W |
MPN: |
I-87054W |
Type: |
PWM Output / Isolated Digital Input I/O Module |
SKU: |
49503 |
Number of Output Channels: |
8 |
Number of Input Channels: |
8 |
Output Type: |
PWM (Pulse Width Modulation) |
Input Type: |
Isolated Digital Input (DI) |
Series: |
I-87K |
Compatible With: |
ICP DAS I-8000, I-87K backplane systems |
Form Factor: |
Card/Module |
Interface: |
I-87K bus backplane connector |
Connector Type: |
Screw terminal (orange), backplane bus connector |
Condition: |
Used – Inspected and in Good Condition |
Seller Notes: |
Module only; no additional accessories included. |
Country/Region of Manufacture: |
Taiwan |
Condition Notes: |
ICP DAS I-87054W PWM/DI module inspected and in good condition. Terminal block and backplane connector intact, PCB shows no damage. Normal light wear from prior use. Please contact us with any questions. |
