ICP DAS

ICP DAS i-2541 RS-232/422/485 to Fiber Optic Converter DIN-Rail 300-115200 bps

(No reviews yet) Write a Review
SKU:
52540
MPN:
i-2541
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
4.00 LBS
Shipping:
Calculated at Checkout
  • ICP DAS i-2541 RS-232/422/485 fiber optic converter — angled front-left view showing ST fiber port and orange terminal block
  • ICP DAS i-2541 fiber optic converter — rear label view showing specs and barcode sticker
  • ICP DAS i-2541 fiber optic converter — front face showing brand label and 'RS-232/422/485 to Fiber Optic Converter' text
  • ICP DAS i-2541 — right side panel showing POWER, TD, RD LEDs, TxD and RxD fiber ports, and labeled RS-422/485 and RS-232 screw terminals
  • ICP DAS i-2541 — top view showing 3-position orange power terminal block labeled F.G., GND, +VS and DIN-Rail clip
  • ICP DAS i-2541 — bottom label panel showing fiber port specs, wavelength, baud rate, distance, isolation, and power requirements
  • ICP DAS i-2541 — side panel showing RS-232, RS-422, and RS-485 wiring diagram and CE/RoHS markings
$130.00
Was: $250.00
Current Stock: 1

Sold Out

Description

ICP DAS i-2541 RS-232/422/485 to Fiber Optic Converter DIN-Rail 300-115200 bps

Industrial serial-to-fiber converter that bridges RS-232, RS-422, and RS-485 devices to fiber optic networks. Converts electrical serial signals to optical signals for long-distance transmission over multimode fiber with ST connectors.

Specifications & What's Included

  • Fiber Port: ST connector, multimode (50/125, 62.5/125, 100/140 µm)
  • Serial Interface: RS-232/422/485 with auto-switching
  • Data Rate: 300–115200 bps
  • Transmission Distance: Up to 2 km
  • Wavelength: 850 nm
  • Power: +10 to +30 VDC unregulated, 2.0 W max
  • Isolation: 3000 Vdc, 3570 Vrms optical
  • Operating Temperature: -25°C to +75°C
  • Form Factor: DIN-rail mount
  • Includes: Unit only, no accessories

Applications

Used in industrial automation, telecom, and SCADA systems requiring extended-distance serial communication. Supports point-to-point RS-232/422 and multipoint RS-485 networks. Common in manufacturing facilities, utility monitoring, and remote equipment installations where fiber isolation and noise immunity are required.

Condition: Used
This ICP DAS i-2541 RS-232/422/485 Fiber Optic Converter has been inspected and is in good condition. It was pulled from a working environment where it was in use and functional. The housing is intact with normal light wear consistent with industrial use. The orange terminal blocks and ST fiber port appear undamaged. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
ICP DAS
Model:
i-2541
MPN:
i-2541
SKU:
52540
Type:
RS-232/422/485 to Fiber Optic Converter
Interface Type:
RS-232, RS-422, RS-485
Fiber Port Type:
ST (Multi-mode)
Fiber Cable Type:
50/125, 62.5/125, 100/140 µm
Wavelength:
850 nm
Data Rate:
300 – 115200 bps (auto-switching)
Transmission Distance:
Up to 2 km (6,600 ft)
Power Requirements:
Unregulated +10 VDC to +30 VDC
Power Consumption:
2.0 W max
Isolation Voltage:
3000 Vdc
Optical Isolation:
3570 Vrms
Operating Temperature:
-25°C to +75°C
Form Factor:
DIN-Rail Mount
ESD Protection:
Yes — RS-232/422/485 data lines
LED Indicators:
Power, TD, RD
Serial Terminals:
8-position screw terminal block (orange)
Power Terminals:
3-position screw terminal block (F.G., GND, +VS)
Condition:
Used – Pulled from Working Environment
Country/Region of Manufacture:
Taiwan
Compatible With:
RS-232/422/485 point-to-point and RS-485 multi-drop systems
Seller Notes:
Unit only — no accessories included. Pulled from a working environment.
Condition Notes:
ICP DAS i-2541 fiber optic converter — inspected, in good used condition. Pulled from a working environment where it was in use and functional. Terminal blocks and fiber port intact. Normal light wear.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

B&B Electronics FOSTCDR fiber optic converter front panel showing terminal block labels and DIP switch settings chart B&B Electronics FOSTCDR bottom view showing FCC/CE compliance label, UL mark E222870, and barcode label
Add to Cart
Quick view

B&B Electronics FOSTCDR RS-232/RS-485 to Multimode Fiber Optic Converter 4km

B&B Electronics

$95.00
Was: $200.00
B&B Electronics FOSTCDR RS-232/RS-485 to Multimode Fiber Optic Converter 4kmThe B&B Electronics FOSTCDR is an industrial-grade serial to multimode fiber optic converter that bridges RS-232 and...
52542
SKU:
52542
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Brand:
B&B Electronics
Model:
FOSTCDR
MPN:
FOSTCDR
Type:
Industrial Serial to Multimode Fiber Optic Converter
SKU:
52542
Condition:
Used – Pulled from Working Environment
Interface Type:
RS-232, RS-485, RS-422
Fiber Type:
Multimode
Fiber Connectors:
ST (RX and TX)
Data Rate:
Up to 115.2 kbps
Range:
2.5 miles (4 km)
Input Voltage:
10–30 VDC
Isolation:
2000V
Protocol Compatibility:
MODBUS ASCII/RTU
EMI/RFI Protection:
Yes
Baud Rate Settings:
>57.6k, 38.4k, 19.2k, 9600, 4800 baud (DIP switch)
Multi-Drop Support:
Up to 31 devices on fiber optic ring
Configuration:
8-position DIP switch; terminal block wiring
Mounting:
DIN Rail
LED Indicators:
RD, TD, Power
Certifications:
UL, CE, FCC Part 15
Seller Notes:
Unit only; no accessories included.
Country/Region of Manufacture:
United States
Condition Notes:
B&B Electronics FOSTCDR fiber optic converter, used. Inspected and in good condition; pulled from a working environment. Enclosure shows light surface wear. Terminal blocks, ST fiber ports, and DIP switch intact.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Red Lion Sixnet SL-2ES-2ST industrial media converter — side label showing model, Rev 2.00, and DIN-rail clip Red Lion Sixnet SL-2ES-2ST media converter — bottom and DIN-rail mounting rail view
Add to Cart
Quick view

Red Lion Sixnet SL-2ES-2ST Industrial Media Converter 100BaseFX ST 4KM 10/100TX

Red Lion Sixnet

$150.00
Was: $300.00
Red Lion Sixnet SL-2ES-2ST Industrial Media Converter 100BaseFX ST 4KM 10/100TXUnmanaged Ethernet media converter bridging copper and fiber connections. Converts 10/100BaseTX RJ-45 signals to...
52538
SKU:
52538
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Brand:
Red Lion (Sixnet)
Model:
SL-2ES-2ST
MPN:
SL-2ES-2ST
Type:
Industrial Ethernet Media Converter
SKU:
52538
Hardware Revision:
Rev 2.00
Number of Ports:
2
Port 1:
10/100BaseTX RJ-45 (copper)
Port 2:
100BaseFX Multimode ST fiber, 4KM
Fiber Type:
Multimode
Fiber Connector Type:
ST
Fiber Range:
4KM (4 kilometers)
Copper Interface:
10/100BaseTX RJ-45
Management Type:
Unmanaged
Standards Compliance:
IEEE 802.3
Power Requirements:
10-30 VDC (redundant inputs)
Max Current:
110 mA @ 30 VDC
Operating Temperature:
-10 to 60°C
MTBF:
>1,000,000 hours
Duplex:
Full / Half Duplex (auto)
Auto-Sensing:
MDIX, speed, and flow control
Surge Protection:
Yes — on power inputs
Form Factor:
DIN-Rail Mount (Lexan enclosure)
Enclosure Material:
Lexan (polycarbonate)
LED Indicators:
Power, Fiber Link/Activity
Certifications:
UL Listed, CE, RoHS, FCC Part 15, IS/Ex
Country/Region of Manufacture:
Taiwan (Designed in USA)
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit only — no accessories included. Pulled from a working environment.
Condition Notes:
Red Lion Sixnet SL-2ES-2ST media converter. Inspected, in good used condition. Pulled from a working environment where it was in service and functional. Minor surface wear. ST fiber ports, RJ-45, and DIN-rail clip intact.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
B&B Electronics USPTL4 U-LINX RS-422/485 USB adapter — front panel view showing TD/RD indicators and terminal block B&B Electronics USPTL4 — bottom label showing RS-422/RS-485 jumper settings, FCC compliance, and serial number
Add to Cart
Quick view

B&B Electronics USPTL4 USB to RS-422/485 Serial Converter 460.8kbps TB

B&B Electronics

$50.00
Was: $100.00
B&B Electronics USPTL4 USB to RS-422/485 Serial Converter 460.8kbps TBUSB to RS-422/485 serial converter for industrial and telecommunications applications. Connects legacy RS-422/485 serial devices...
52539
SKU:
52539
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Brand:
B&B Electronics
Model:
USPTL4
MPN:
USPTL4
Type:
USB to RS-422/485 Serial Converter
SKU:
52539
Condition:
Used – Pulled from Working Environment
Interface Type:
RS-422, RS-485
Host Interface:
USB 2.0 (USB Type-B)
Serial Connector Type:
Plug-in Screw Terminal Block
Data Rate:
460.8 kbps
Wiring Mode:
RS-422: 4-Wire; RS-485: 2-Wire or 4-Wire
Echo Mode:
RS-422: Echo On; RS-485: Echo Off (jumper selectable)
Power Source:
USB Bus Powered
Terminal Block Signals:
TDA(-), TDB(+), RDA(-), RDB(+), GND
Front Panel Indicators:
TD (Transmit Data), RD (Receive Data) LEDs
Standards Compliance:
FCC Part 15 Class B; CE
Product Line:
U-LINX USB Serial Conversion
Form Factor:
Desktop / DIN-mount compact module
Country/Region of Manufacture:
United States
Seller Notes:
Unit only; pulled from working environment. No accessories included.
Condition Notes:
B&B Electronics USPTL4 USB to RS-422/485 serial converter. Inspected and in good condition; pulled from a working environment. USB port and terminal block contacts clean. Normal light wear.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov