Semiconductor Tools
Semiconductor tools are specialized equipment used in the manufacturing and testing of semiconductor devices. These tools are vital for the production of integrated circuits and other electronic components. Common examples include wafer fabrication tools, semiconductor metrology tools, and packaging equipment. Semiconductor tools are designed to ensure precision, accuracy, and efficiency in the semiconductor manufacturing process. They help in etching, deposition, patterning, and testing of semiconductor materials. These tools play a crucial role in the semiconductor industry, enabling the development of cutting-edge technology. Investing in high-quality semiconductor tools is essential for achieving optimal results in semiconductor manufacturing.
-
SV Probe C48-2 Rev A 888008 DAS-2 Motherboard Test Fixture Gold Fingers
SV Probe Inc
$75.00Was: $150.00SV Probe C48-2 Rev A 888008 DAS-2 Motherboard Test Fixture Gold FingersThe SV Probe C48-2 is a board-level test fixture designed for functional and in-circuit testing of motherboards and PCB assemblies. Manufactured by SV Probe (copyright 1994), this...36600- SKU:
- 36600
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- SV Probe
- Model:
- C48-2
- MPN:
- 888008
- Secondary Model:
- DAS-2
- Hardware Revision:
- Rev A
- Type:
- Motherboard / PCB Test Fixture
- SKU:
- 36600
- Device Number:
- DAS-2
- SV Number:
- 7582
- Date Code:
- 12-30-97
- Copyright Year:
- 1994
- Interface / Contact Type:
- Gold Finger Edge Connectors
- Form Factor:
- PCB Card / Flat Fixture
- Approximate Dimensions:
- ~4 in. W x 9 in. L
- Application / Use Case:
- Semiconductor / Board-Level Functional Testing
- Probe Side:
- Labeled (Probe Side / Top Side markings on PCB)
- Contact Array:
- Circular spring-pin probe array, numbered/lettered pads
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- SV Probe C48-2 Rev A 888008 DAS-2 Motherboard Test Fixture. Inspected, in good used condition. PCB clean, gold fingers intact, probe array shows normal wear. ~4" x 9". S.V. No. 7582, dated 12-30-97.
$75.00Was: $150.00 -
Parker Technologies PS2000 Gap Etch Metrology System 230V 50Hz SECS IBM EDTA2
Parker Technology
$3,000.00Was: $6,000.00Parker Technologies PS2000 Gap Etch Metrology System 230V 50Hz SECS IBM EDTA2 Gap etch wet chemistry metrology system for semiconductor fabrication process control. Monitors and analyzes chemical parameters during gap etch operations using wet chemistry...36583- SKU:
- 36583
- Availability:
- Usually ships within 5-7 business days — please contact us regarding freight arrangements for this large system.
- Weight:
- 1,437.00 LBS
- Brand:
- Parker Technologies
- Model:
- PS2000
- MPN:
- P2MPC01 / P2AT02 / P2R100001 / P2LCU01
- Secondary Model:
- IBM EDTA2
- SKU:
- 36583
- Type:
- Gap Etch Wet Chemistry Metrology System
- Manufacture Year:
- 1999
- Electrical Diagram No.:
- S1DE0027
- Supply Voltage:
- 230 VAC
- Phase:
- Single Phase
- Frequency:
- 50 Hz
- Full Load Current:
- 13A
- Circuit Breaker Rating:
- 20A
- Short Circuit Interrupt Current:
- 10KA I.C. @ 250VAC
- Power Requirements:
- 230VAC, Single Phase, 50Hz, 13A Full Load
- Gas Requirements:
- Oil-Free Air 1/2 NPT-F; Nitrogen 1/4 NPT-F
- DI Water Connection:
- 1/4 NPT
- Waste Line:
- Required — see documentation
- Communication Interface:
- SECS (Semiconductor Equipment Comm. Standard)
- Host Ports:
- 2x DB-9 RS-232 HOST connectors
- SECS Interface:
- DB-25 SECS Interface connector
- Modem Port:
- RJ-11 telephone/modem port
- Printer Port:
- DB-25 parallel printer port
- Level/Handshake Connectors:
- 2x multi-pin circular (Level/Handshake 1 & 2)
- Facilities EPO Connector:
- Multi-pin circular (Facilities EPO)
- Control Computer:
- IBM PC with CRT monitor, keyboard, mouse
- UPS:
- APC Smart-UPS (included)
- Chemical Reagents:
- EDTA, NaOH, Decant pump lines
- Replenishment System:
- 3x carboy stations (Service Carboy, Carboy 1, Carboy 2)
- Analysis Capability:
- pH, ORP, Colorimetric Titration, Direct pH
- Tool Connections:
- Gap Etch Tool 1 and Tool 2 fluid manifolds
- Exhaust Monitoring:
- Dwyer Photohelic differential pressure gauge
- Safety Features:
- E.M.O. mushroom stop, Door/Leak/Exhaust indicators
- Form Factor:
- Freestanding Cabinet Workstation
- Condition:
- Used – Inspected
- Seller Notes:
- Includes PS2000 Installation/User Manual and IBM EDTA2 engineering documents; APC UPS included
- Application:
- Semiconductor Fab Gap Etch Process Wet Chemistry Control
- Country/Region of Manufacture:
- Germany
- Condition Notes:
- Parker Technologies PS2000 Gap Etch Metrology System. Inspected, appears in good used condition. Cabinet clean with minor wear. IBM PC, APC UPS, and PS2000 manual included. Large system — freight required. Contact us with questions.
$3,000.00Was: $6,000.00 -
Karl Suss MA56 Mask Aligner Photolithography 4" Wafer 350W 110V 1500VA 60Hz
Karl Suss
$10,000.00Was: $20,000.00Karl Suss MA56 Mask Aligner Photolithography 4" Wafer 350W 110V 1500VA 60HzThe Karl Suss MA56 is a contact/proximity mask aligner used in photolithographic patterning of semiconductor wafers. This system is configured for 4-inch (100mm) wafers and uses a...36147- SKU:
- 36147
- Availability:
- Usually ships within 5-7 business days — contact us for freight quote.
- Weight:
- 1,200.00 LBS
- Brand:
- Karl Suss
- Model:
- MA56
- MPN:
- 260MS022
- Type:
- Mask Aligner / Contact Aligner
- SKU:
- 36147
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Missing ENI power supply; all other tooling intact. Sold as-is.
- Country/Region of Manufacture:
- USA
- Form Factor:
- Freestanding Tabletop / Stand-Alone
- Voltage:
- 110V
- Power Rating:
- 1500 VA
- Frequency:
- 60 Hz
- Exposure Unit Power:
- 350W
- Wafer Size:
- 4 inch (100mm)
- Stage Type:
- X, Y, Omega with Scope Manipulator
- Cassette System:
- Yes — with pre-aligned station
- Exposure Optics:
- Mercury (Hg) lamp, vacuum contact
- Utilities Required:
- Vacuum, Compressed Air, Nitrogen, Power (1.1kW)
- Application:
- Photolithography / Semiconductor Wafer Fabrication
- Compatible With:
- ENI power supply (not included)
- Alignment Type:
- Contact / Proximity
- Binocular Microscope:
- Yes — dual-eyepiece alignment microscope included
- Condition Notes:
- Karl Suss MA56 Mask Aligner sold as-is — missing ENI power supply. Factory-rebuilt, low use since rebuild. Alignment head, stage, cassette, optics, and tooling all present. Not powered or tested. Controller (260MS022) included.
$10,000.00Was: $20,000.00 -
ISA Riber 304S Titanium Sublimator Power Supply 0-60A 6-Filament 220V MBE
ISA Riber
$600.00Was: $1,200.00ISA Riber 304S Titanium Sublimator Power Supply 0-60A 6-Filament 220V MBEPower supply unit for titanium sublimation evaporation sources used in molecular beam epitaxy (MBE) and ultra-high vacuum (UHV) systems. Supplies adjustable filament heating current...35077- SKU:
- 35077
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 80.00 LBS
- Brand:
- ISA Riber
- Model:
- 304S
- MPN:
- 304S
- Type:
- Titanium Sublimator Power Supply
- SKU:
- 35077
- Condition:
- Used – Inspected
- Seller Notes:
- Includes multi-conductor filament cable harness with 6 color-coded leads
- Country/Region of Manufacture:
- France
- Form Factor:
- Benchtop
- Input Voltage:
- 220V
- Input Frequency:
- 50-60 Hz
- Input Current (Fuse):
- 3.15A
- Output Current Range:
- 0-60A (adjustable)
- Number of Filament Channels:
- 6
- Filament Selection:
- 6-position rotary selector switch
- Front Panel Controls:
- Power ON/OFF, Timer, Heater, Current Adjust knob
- Meter:
- Analog ammeter, 0-60A
- Connector Type (Mains):
- IEC C14 inlet
- Application:
- Titanium sublimation pump, MBE, UHV vacuum systems
- Manufacturer Location:
- BP 231-92505 Rueil Cedex, France
- OF / Code:
- OF 716420 Code 250 121 70%
- Unit Number:
- 600 045
- Condition Notes:
- ISA Riber 304S Titanium Sublimator Power Supply. Inspected, appears in good used condition. Front panel controls and analog ammeter intact. Includes 6-conductor filament cable harness. Typical lab wear.
$600.00Was: $1,200.00 -
Physical Electronics PHI 20-025 Sample Heater Control Voltage Current
Physical Electronics Inc.
$275.00Was: $550.00Physical Electronics PHI 20-025 Sample Heater Control Voltage CurrentRackmount sample heater control unit designed for use with Physical Electronics surface analysis instruments. Provides voltage and current control for heating samples during XPS and AES...34977- SKU:
- 34977
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Physical Electronics Industries (PHI)
- Model:
- 20-025
- MPN:
- 20-025
- Type:
- Sample Heater Control
- SKU:
- 34977
- Form Factor:
- Rackmount
- Front Panel Controls:
- Power switch, Voltage Adjust knob, High Voltage On button
- Front Panel Meters:
- Analog Voltage (Volts DC) meter, Analog Current meter
- Safety:
- Caution High Voltage — labeled on unit
- Rear Connectors:
- Multi-pin circular connector, two BNC connectors
- Application:
- Sample heating in surface analysis / XPS / AES systems
- Compatible With:
- Physical Electronics PHI surface analysis instruments
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no accessories included
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Physical Electronics PHI 20-025 Sample Heater Control. Inspected and in good condition. Minor surface wear consistent with lab use. Front panel controls and analog meters intact. Rear connectors present and undamaged.
$275.00Was: $550.00 -
Commonwealth Scientific HCES 5000 Hollow Cathode Electron Source Power Supply
Commonwealth Scientific
$1,350.00Was: $2,700.00Commonwealth Scientific HCES 5000 Hollow Cathode Electron Source Power Supply 1.7KVAPower supply for hollow cathode electron sources used in ion beam and thin film deposition systems. Operates at 208/220V input with 1.7 KVA rating, supporting both remote...34957- SKU:
- 34957
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 151.00 LBS
- Brand:
- Commonwealth Scientific
- Model:
- HCES 5000
- MPN:
- HCES 5000
- Type:
- Hollow Cathode Electron Source Power Supply
- SKU:
- 34957
- Input Voltage:
- 208/220V
- Power Rating:
- 1.7 KVA
- Frequency:
- 50/60 Hz
- Water Cooling:
- N/A (air cooled)
- Quantity Available:
- 2 units
- Front Panel Controls:
- Emission Current Adjust knob, Mains indicator
- Front Panel Displays:
- Dual LED displays: Emission Current/Bias Voltage, Keeper Current/Keeper Voltage
- Front Panel Modes:
- Remote / Local / Start selector
- Rear Connectors:
- Source (multi-pin circular), Remote (DB-15), Power, Interlock
- Connector Type:
- Multi-pin circular (Source), DB-15 (Remote)
- Form Factor:
- Benchtop / Rackmount
- Cooling:
- Forced air (internal fan)
- Application:
- Hollow cathode ion/electron source, PVD, thin film deposition
- Country/Region of Manufacture:
- United States
- Seller Notes:
- 2 units available; no source cables included. Pulled from working environment.
- Condition:
- Used – Pulled from Working Environment
- Condition Notes:
- Commonwealth Scientific HCES 5000 Hollow Cathode Electron Source Power Supply. 2 units, inspected, pulled from a working environment where in use and functional. Good condition. No source cables included.
$1,350.00Was: $2,700.00 -
6-Position Logic Driven Pedestal Cassette Tray Automated Handler w/ Ribbon Cable
Pedestal
$150.00Was: $300.006-Position Logic Driven Pedestal Cassette Tray Automated Handler w/ Ribbon CableThis is a 6-position logic driven pedestal cassette tray designed for precision automated cassette handling in semiconductor processing or similar high-precision...32785- SKU:
- 32785
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Unbranded
- Model:
- 6-Position Logic Driven Cassette Tray Pedestal
- Type:
- Logic Driven Pedestal Cassette Tray Handler
- SKU:
- 32785
- Number of Positions:
- 6
- Drive Type:
- Logic Driven / Motorized
- Form Factor:
- Pedestal / Freestanding
- Connector Type:
- Ribbon Cable with Red Molex Connector
- Indicator:
- Green LED status indicator
- Construction:
- Black anodized aluminum plate and steel pedestal
- Application:
- Semiconductor / Precision Automated Cassette Handling
- Mechanism:
- Linear slide rail with adjustable mounting brackets
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes attached ribbon cable harness and red Molex connector
- Condition Notes:
- This 6-Position Logic Driven Pedestal Cassette Tray has been inspected and is in good condition. Tray, pedestal, linear slide, and mounting brackets appear intact. Ribbon cable and red Molex connector included. Normal surface wear.
$150.00Was: $300.00 -
Stainless Steel Tick Mark Flange OD 8.75" ID 5.87" 0.071" Thick Wafer Ring
Unbranded
$75.00Was: $150.00Stainless Steel Tick Mark Flange OD 8.75" ID 5.87" 0.071" Thick Wafer RingThis is a precision machined stainless steel tick mark flange ring measuring 8.75" outside diameter, 5.87" inside diameter, and 0.071" thick. The ring features an octagonal outer...32596- SKU:
- 32596
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Unbranded
- Model:
- Tick Mark Flange 8.75" OD
- Application:
- Semiconductor wafer handling, vacuum chuck tooling
- Condition:
- Used – Inspected and in Good Condition
- SKU:
- 32596
- Seller Notes:
- Sold as shown. No additional accessories included.
- Condition Notes:
- Stainless steel tick mark flange OD 8.75" ID 5.87" 0.071" thick. Inspected and in good condition. Clips and locking assemblies intact. Light surface oxidation typical of age. Please contact us with any questions.
$75.00Was: $150.00