Description
GNP Computers 1-502703 cPCI IDE HD PMC Card Rev B Hitachi DK23BA-10
This is a CompactPCI (cPCI) mass storage module that combines an IDE hard disk controller with PMC (PCI Mezzanine Card) interface functionality. It ships with a Hitachi DK23BA-10 10.06GB IDE hard drive pre-installed on the card, providing embedded storage for CompactPCI-based systems. The module integrates both the cPCI backplane connection and IDE drive control, allowing it to function as a standalone storage solution in compatible host systems.
Specifications & What's Included
- Make & Model: GNP Computers 1-502703 (Rev B)
- Secondary Model: 010329
- Form Factor: CompactPCI (cPCI) card with PMC mezzanine interface
- Installed Hard Drive: Hitachi DK23BA-10, 10.06GB capacity
- Hard Drive Interface: IDE/ATA (Parallel ATA)
- Hard Drive Form Factor: 2.5 inch
- Card Interfaces: CompactPCI, IDE, PMC
- PCB Description: cPCI IDE Hard Disk controller + PMC card
- Manufactured: United States
- Included: Hitachi DK23BA-10 hard drive is pre-installed on the card; no additional components
Applications
CompactPCI storage cards like this model were standard building blocks in embedded systems, telecommunications infrastructure, and industrial computing platforms throughout the 2000s and 2010s. The unit functions as a mass storage module within chassis supporting CompactPCI backplanes, and was commonly found in network appliances, telecom base station controllers, routing equipment, and ruggedized industrial computing systems. The combination of integrated IDE control and PMC slot architecture made it ideal for systems requiring flexible, modular storage without occupying additional main-board space. These modules remain in use in legacy embedded and telecom systems where CompactPCI architectures are still operational.
This GNP Computers 1-502703 CompactPCI IDE storage card with integrated PMC interface has been inspected and is in good condition. The PCB is clean with no visible damage, and the Hitachi DK23BA-10 10.06GB IDE hard drive is installed and secured on the board. The cPCI faceplate and card ejectors are intact and functional. Normal light wear consistent with prior use is present. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
GNP Computers |
Model: |
1-502703 |
MPN: |
1-502703 |
Secondary Model: |
010329 |
Hardware Revision: |
Rev B |
Type: |
CompactPCI IDE Hard Disk + PMC Storage Card |
SKU: |
24367 |
Form Factor: |
CompactPCI (cPCI) Card/Module |
Interface Type: |
CompactPCI (cPCI), IDE, PMC |
Includes: |
Hitachi DK23BA-10 10.06GB IDE HDD installed |
HDD Model: |
Hitachi DK23BA-10 |
HDD Capacity: |
10.06 GB |
HDD Interface: |
IDE (ATA) |
HDD Form Factor: |
2.5 inch |
HDD Manufacturer: |
Hitachi, Ltd. |
PCB Description: |
cPCI IDE HD + PMC PCB |
Country/Region of Manufacture: |
United States |
Seller Notes: |
Includes Hitachi DK23BA-10 10.06GB IDE hard drive installed on board |
Condition Notes: |
GNP Computers 1-502703 cPCI IDE storage card with Hitachi DK23BA-10 HDD. Inspected in good condition. PCB clean, no visible damage. Drive installed, faceplate and ejectors intact. Normal light wear from prior use. |
Installed Hard Drive: |
Hitachi DK23BA-10 10.06GB IDE (ATA) |
Hard Drive Capacity: |
10.06 GB |
Hard Drive Model: |
Hitachi DK23BA-10 |
Hard Drive Interface: |
IDE (ATA) |
Hard Drive Form Factor: |
2.5 inch |
Compatible With: |
CompactPCI-based host systems with PMC slot architecture |
