Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Keithley PC 6292 Rev B Metrabus A/D Board 62900 9310/K — full top-side view showing green PCB with screw terminal connectors and ICs Keithley PC 6292 Rev B Metrabus A/D Board — bottom (solder side) view of PCB showing trace routing

    Keithley PC 6292 Rev B Metrabus A/D Board 62900 9310/K 5192 I/O Card

    Keithley

    $74.00
    Was: $274.00
    Keithley PC 6292 Rev B Metrabus A/D Board 62900 9310/K 5192 I/O Card The Keithley PC 6292 is an analog-to-digital (A/D) input/output board designed for use with Keithley's Metrabus data acquisition system architecture. It provides analog input and...
    45766
    SKU:
    45766
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Keithley
    Model:
    PC 6292
    MPN:
    62900 9310/K
    Secondary Model:
    5192
    Hardware Revision:
    Rev B
    Type:
    Analog-to-Digital (A/D) I/O Expansion Board
    SKU:
    45766
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Board only; pulled from a working Metrabus system environment
    Form Factor:
    Card / Module (PCB)
    Bus Interface:
    Metrabus
    Interface Type:
    Metrabus
    Application:
    Data Acquisition, Analog Input, I/O Expansion
    Compatible With:
    Keithley Metrabus Data Acquisition Systems
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Keithley PC 6292 Rev B Metrabus A/D Board (62900 9310/K) inspected and in good used condition. Pulled from a working environment where it was in active use. PCB shows normal wear; all components and connectors appear intact.
    $74.00
    Was: $274.00
  • RF Coaxial Isolator 110715-01 27338 — angled view showing N-type female connector and part number label with S/N 826445 RF Coaxial Isolator 110715-01 — opposite side view showing SMA female connector and blue painted body with mounting screws

    RF Coax Isolator 110715-01 27338 SMA N-Type Connectors Satcom Microwave

    Blue

    $65.00
    Was: $125.00
    RF Coax Isolator 110715-01 27338 SMA N-Type Connectors Satcom MicrowaveRF coaxial isolator designed to provide signal isolation in microwave and satcom systems. Routes RF signals between N-type and SMA connectors while minimizing reflections and...
    45692
    SKU:
    45692
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    110715-01
    MPN:
    110715-01
    Secondary Model:
    27338
    Part Number 2:
    101103981
    SKU:
    45692
    Type:
    RF Coaxial Isolator
    Condition:
    Used – Pulled from Working Environment
    Connector 1 (IN):
    N-Type Female
    Connector 2 (OUT):
    SMA Female
    Application:
    Satcom, Microwave, RF Signal Isolation
    Form Factor:
    Compact Block / Inline Module
    Color:
    Blue
    Seller Notes:
    Unit only — no additional accessories included.
    Condition Notes:
    RF Coaxial Isolator 110715-01 / 27338 inspected and in good used condition. Pulled from a working satcom/microwave environment. Body shows light wear; N-type and SMA connectors intact. Please contact us with any questions.
    $65.00
    Was: $125.00
  • RF Coax Isolator 27338 110715-02 – angled front-left view showing large SMA threaded port and part number label RF Coax Isolator 27338 – rear and side view showing small SMA female port and blue anodized body with mounting screws

    RF Coax Isolator 27338 110715-02 SMA Connector Satcom Microwave Component

    Blue

    $45.00
    Was: $90.00
    RF Coax Isolator 27338 110715-02 SMA Connector Satcom Microwave ComponentRF coaxial isolator designed to provide one-way signal transmission while blocking reverse signals in RF and microwave systems. Features SMA connectors in an inline block module...
    45685
    SKU:
    45685
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    27338
    MPN:
    110715-02
    Secondary Model:
    110715-02-101104345
    SKU:
    45685
    Type:
    RF Coaxial Isolator
    Connector Type:
    SMA
    Body Color:
    Blue
    Application:
    Satcom, Microwave, RF Systems
    Form Factor:
    Inline / Block Module
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only — no additional accessories included
    Condition Notes:
    RF Coax Isolator 27338 / 110715-02 pulled from a working satcom environment, inspected and in good used condition. Blue body shows minor surface wear. SMA connectors intact with no visible damage.
    $45.00
    Was: $90.00
  • WMI WMI16453 coaxial RF isolator – angled front-left view showing SMA port on top and N-type female connector on right side, blue housing WMI WMI16453 RF isolator – angled rear-right view showing label side with model number WMI16453, part number 2JX-8351-C-1, SN 266, DC 8425 markings

    WMI WMI16453 2JX-8351-C-1 Coaxial RF Isolator SMA N-Type Connector Satcom

    Blue

    $35.00
    Was: $70.00
    WMI WMI16453 2JX-8351-C-1 Coaxial RF Isolator SMA N-Type Connector SatcomCoaxial RF isolator used in satellite communications and microwave RF applications. The unit provides isolation between connected RF circuits using SMA and N-type female connectors...
    45684
    SKU:
    45684
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    WMI
    Model:
    WMI16453
    MPN:
    WMI16453
    Secondary Model:
    2JX-8351-C-1
    SKU:
    45684
    Type:
    Coaxial RF Isolator
    Connector Type 1:
    SMA (female, top port)
    Connector Type 2:
    N-Type (female, side port)
    Port Configuration:
    SMA top (port), N-type side (IN/OUT labeled)
    Housing Color:
    Blue anodized aluminum
    Application:
    Satellite Communications (Satcom), Microwave RF
    Form Factor:
    Compact Block / Drop-in
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from working satcom environment, inspected, good condition.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    WMI WMI16453 coaxial RF isolator pulled from a working satcom environment, inspected and in good used condition. Blue housing shows minor surface wear and paint chips. SMA and N-type connectors intact.
    $35.00
    Was: $70.00
  • RYT Industries 201517 RF microwave isolator – front label view showing model and serial number on blue housing with SMA connector RYT Industries 201517 RF microwave isolator – rear/side angle view showing four-screw face plate and SMA connector port

    RYT Industries 201517 RF Microwave Isolator SMA Coaxial Ferrite Component

    RYT

    $35.00
    Was: $70.00
    RYT Industries 201517 RF Microwave Isolator SMA Coaxial Ferrite ComponentThis is a two-port RF microwave ferrite isolator designed to provide signal isolation in coaxial systems. The unit uses SMA female connectors and ferrite technology to control...
    45683
    SKU:
    45683
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    RYT Industries
    Model:
    201517
    MPN:
    201517
    Type:
    RF Microwave Ferrite Isolator
    SKU:
    45683
    Connector Type:
    SMA (Female)
    Number of Ports:
    2
    Form Factor:
    Connectorized / Drop-in
    Body Style:
    Compact Square Blue Aluminum Housing
    Seller Notes:
    Unit only; pulled from a working environment
    Application:
    RF / Microwave Signal Isolation
    Country/Region of Manufacture:
    United States
    Condition Notes:
    RYT Industries 201517 RF microwave isolator in good used condition. Pulled from a working environment where it was in active use. SMA connectors appear clean. Light surface wear on housing. Please contact us with any questions.
    $35.00
    Was: $70.00
  • Omron G3FM-2R5 SLN solid state relay and G6B-1114P relay assembly mounted on metal DIN rail slider – full assembly front-angle view Close-up of Omron G3FM-2R5 SLN solid state relay label showing 0.5A 250VAC 125VDC rating and Fuji HH52PW-L DC24V relay

    Omron G3FM-2R5 SLN Solid State Relay & G6B-1114P HH52PW-L PYFO8A DIN Rail

    Omron

    $65.00
    Was: $125.00
    Omron G3FM-2R5 SLN Solid State Relay & G6B-1114P HH52PW-L PYFO8A DIN RailThis is a used relay assembly mounted on DIN rail, combining solid state relays (SSR) with electromechanical relays for industrial control applications. The assembly switches AC and...
    45676
    SKU:
    45676
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Omron
    Model:
    G3FM-2R5 SLN
    MPN:
    G3FM-2R5
    Type:
    Solid State Relay Assembly
    SKU:
    45676
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Assembly includes 5x G3FM-2R5, 5x HH52PW-L, 10x PYFO8A, 4x G6B-1114P on DIN rail
    Country/Region of Manufacture:
    Japan
    Form Factor:
    DIN Rail Mount
    Relay Type:
    Solid State Relay (SSR)
    Load Voltage Rating:
    250VAC / 125VDC
    Load Current Rating:
    0.5A
    Coil Voltage:
    24VDC
    Contact Rating:
    5A 250VAC, 5A 30VDC
    Number of Relays:
    5x G3FM-2R5 SSR + 4x G6B-1114P
    Socket / Base Model:
    PYFO8A (Omron)
    Compatible Relay Socket:
    PYFO8A
    Secondary Components:
    5x Fuji Electric HH52PW-L relays
    Mounting Type:
    DIN Rail
    Input Type:
    DC Input
    Condition Notes:
    Omron G3FM-2R5 SLN relay assembly inspected and in good used condition. All relays seated, DIN rail intact, no cracked housings or damaged terminals observed. Normal light wear.
    $65.00
    Was: $125.00
  • TDK ZCW2210-01 Noise Filter front-top view showing label with model number and ratings TDK ZCW2210-01 Noise Filter rear-top angle view showing opposite side of housing

    TDK ZCW2210-01 Noise Filter 250V AC 10A 1500V AC EMI Line Filter Japan

    TDK

    $28.00
    Was: $60.00
    TDK ZCW2210-01 Noise Filter 250V AC 10A 1500V AC EMI Line Filter JapanThe TDK ZCW2210-01 is a panel-mount EMI/RFI noise filter designed to suppress conducted electromagnetic interference on AC power lines. Built by TDK Corporation in Japan, it is a...
    45664
    SKU:
    45664
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    TDK
    Model:
    ZCW2210-01
    MPN:
    ZCW2210-01
    Type:
    EMI / RFI Noise Filter
    SKU:
    45664
    Voltage Rating (WV):
    250V AC
    Current Rating:
    10A
    Test Voltage (TV):
    1500V AC
    Lot Number:
    KK 9907
    Country/Region of Manufacture:
    Japan
    Manufacturer:
    TDK Corporation
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; no accessories included.
    Form Factor:
    Panel / Chassis Mount
    Terminals:
    3-phase terminal configuration (R, S, T / line and load)
    Connection Type:
    Screw terminal (through-body conductors)
    Condition Notes:
    TDK ZCW2210-01 Noise Filter inspected and in good used condition. Housing is clean with minor surface marks. Label intact and legible. Terminal conductors present and undamaged.
    $28.00
    Was: $60.00
  • Olson 3908 Data Protector Mains RF Filter front view showing 8 IEC C13 outlets and blue control panel with red pilot light Olson 3908 Data Protector Mains RF Filter rear/bottom view showing gray aluminum housing and warning label

    Olson 3908 Data Protector Mains RF Filter Spike Transient Suppressor 250V 6.3A

    Olson

    $55.00
    Was: $100.00
    Olson 3908 Data Protector Mains RF Filter Spike Transient Suppressor 250V 6.3AThe Olson 3908 Data Protector is a mains-line RF filter combined with spike and transient suppression, designed to clean incoming AC power before it reaches sensitive...
    45628
    SKU:
    45628
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Olson Electronics
    Model:
    3908
    MPN:
    3908
    Type:
    Mains RF Filter / Spike & Transient Suppressor
    SKU:
    45628
    Voltage Rating:
    250V AC
    Current Rating:
    6.3A Maximum
    Fuse Rating:
    6.3A
    Number of Outlets:
    8
    Outlet Type:
    IEC C13
    Features:
    RF/EMI filtering, spike suppression, transient suppression
    Power Indicator:
    Red pilot light on front panel
    Form Factor:
    Rackmount / Panel-Mount Strip
    Country/Region of Manufacture:
    United Kingdom
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; inspected and in good condition.
    Condition Notes:
    Olson 3908 Mains RF Filter inspected and in good condition. Aluminum housing is clean, front panel label clear, 8x IEC C13 outlets intact. Normal light use. Please contact us with any questions.
    $55.00
    Was: $100.00