Mitsubishi
-
Mitsubishi S-N35 Magnetic Contactor 35A 3-Pole 220V w/ TH-N20TAKP Overload Relay
Mitsubishi
$50.00Was: $100.00Mitsubishi S-N35 Magnetic Contactor 35A 3-Pole 220V w/ TH-N20TAKP Overload Relay This is a 3-pole magnetic contactor rated for 35A at 220V coil voltage, supplied with an integrated TH-N20TAKP thermal...53209- SKU:
- 53209
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- S-N35
- MPN:
- S-N35
- Secondary Model:
- TH-N20TAKP
- Type:
- Magnetic Contactor with Thermal Overload Relay
- SKU:
- 53209
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes Mitsubishi TH-N20TAKP thermal overload relay mounted to contactor
- Country/Region of Manufacture:
- Japan
- Voltage Rating:
- 220V Coil
- Current Rating:
- 35A
- Number of Poles:
- 3-Pole
- Contactor Type:
- IEC Magnetic Contactor
- Overload Relay Model:
- TH-N20TAKP
- Overload Relay Type:
- Thermal Overload Relay
- AC Rating:
- AC-6480A (visible on label)
- Form Factor:
- DIN Rail / Panel Mount
- Compatible With:
- Mitsubishi S-N Series Motor Starters
- Application:
- Industrial Motor Control, Power Switching
- Condition Notes:
- This Mitsubishi S-N35 Magnetic Contactor with TH-N20TAKP Thermal Overload Relay was recently removed from a large industrial controller system and is in good used condition.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$50.00Was: $100.00 -
Mitsubishi NF125-CW No Fuse Circuit Breaker 75A 3-Pole AC220V 30kA 50/60Hz
Mitsubishi
$60.00Was: $125.00Mitsubishi NF125-CW No Fuse Circuit Breaker 75A 3-Pole AC220V 30kA 50/60Hz Molded case circuit breaker (MCCB) rated for 75A at AC 220V three-phase operation. Provides overcurrent and short-circuit...53206- SKU:
- 53206
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- NF125-CW
- MPN:
- NF125-CW
- Type:
- No Fuse Circuit Breaker (MCCB)
- SKU:
- 53206
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Pulled from a large industrial controller system; three color-coded lead wires attached
- Country/Region of Manufacture:
- Japan
- Current Rating:
- 75A
- Voltage Rating:
- AC 220V
- Number of Poles:
- 3-Pole
- Interrupting Capacity:
- 30kA
- Frequency:
- 50/60Hz
- Frame Size:
- NF125
- Phase:
- Three Phase
- Certifications:
- CE
- Form Factor:
- DIN Rail / Panel Mount
- Condition Notes:
- This Mitsubishi NF125-CW No Fuse Circuit Breaker was removed from a large industrial controller system and is in good used condition. The breaker body is clean and intact with only minor surface wear consistent with normal service use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$60.00Was: $125.00 -
Mitsubishi SD-N50 Magnetic Contactor 50A 3-Pole 220V Coil THN-60 Overload Relay
Mitsubishi
$75.00Was: $150.00Mitsubishi SD-N50 Magnetic Contactor 50A 3-Pole 220V Coil THN-60 Overload RelayThe Mitsubishi SD-N50 is a 3-pole magnetic contactor used to switch motor and power circuits on and off via a...53205- SKU:
- 53205
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- SD-N50
- MPN:
- SD-N50
- Secondary Model:
- THN-60
- Type:
- Magnetic Contactor
- SKU:
- 53205
- Seller Notes:
- Includes Mitsubishi THN-60 thermal overload relay and UN-CV500 & UN-CZ501 covers
- Country/Region of Manufacture:
- Japan
- Coil Voltage:
- 220V AC
- Current Rating:
- 50A
- Number of Poles:
- 3
- Phase:
- Three Phase
- Form Factor:
- Panel/DIN Mount Contactor
- Overload Relay Model:
- THN-60
- Cover Part Numbers:
- UN-CV500, UN-CZ501
- Condition:
- Used – Pulled from Working Environment
- Condition Notes:
- Used Mitsubishi SD-N50 magnetic contactor (50A, 3-pole, 220V coil), pulled from a control panel. Includes THN-60 overload relay and UN-CV500/UN-CZ501 covers. Good cosmetic condition, not bench-tested. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Mitsubishi FX2N-32MR-ES/UL PLC w/ FX2N-8EYR FX2N-4DA Expansion Modules
Mitsubishi
$225.00Was: $450.00Mitsubishi FX2N-32MR-ES/UL PLC w/ FX2N-8EYR FX2N-4DA Expansion ModulesProgrammable Logic Controller (PLC) from the MELSEC FX2N series with integrated relay outputs and expandable I/O capacity. Base...51967- SKU:
- 51967
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 7.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- FX2N-32MR-ES/UL
- MPN:
- FX2N-32MR-ES/UL
- Secondary Model:
- FX2N-8EYR, FX2N-4DA
- SKU:
- 51967
- Type:
- Programmable Logic Controller (PLC) with Expansion Modules
- Series:
- MELSEC FX2N
- Number of Inputs:
- 16
- Number of Outputs:
- 16
- Output Type:
- Relay
- Program Memory:
- 8000 Steps
- Power Requirements:
- 100-240VAC, 50/60Hz, 30W
- Output Voltage:
- 30VDC / 240VAC, 2A (COS φ=1)
- Expansion Module 1:
- FX2N-8EYR — 8-point relay output, 30VDC/250VAC 2A
- Expansion Module 2:
- FX2N-4DA — 4-channel analog output, 24VDC supply
- Analog Output Range:
- -10 to +10VDC or 0 to 20mA (FX2N-4DA)
- FX2N-4DA Firmware Version:
- Version 1.10
- Certifications:
- UL Listed, CE
- Country/Region of Manufacture:
- Japan
- Form Factor:
- DIN Rail / Panel Mount
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes FX2N-32MR-ES/UL base unit, FX2N-8EYR relay output module, and FX2N-4DA analog output module.
- Condition Notes:
- Mitsubishi FX2N-32MR-ES/UL PLC with FX2N-8EYR and FX2N-4DA modules. Inspected, in good condition. Pulled from a working environment. All three units included. Normal industrial wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$225.00Was: $450.00 -
Mitsubishi A6TBX36 Terminal Board 36-Point Sink I/O PLC MELSEC A-Series
Mitsubishi
$35.00Was: $70.00Mitsubishi A6TBX36 Terminal Board 36-Point Sink I/O PLC MELSEC A-SeriesA 36-point terminal board for Mitsubishi MELSEC A-Series PLCs. This module provides sink-type input/output connectivity via...48109- SKU:
- 48109
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- A6TBX36
- MPN:
- A6TBXY36
- Type:
- PLC Terminal Board
- SKU:
- 48109
- I/O Type:
- Sink Input/Output
- Number of Points:
- 36
- Compatible With:
- Mitsubishi MELSEC A-Series PLC
- Series:
- MELSEC A-Series
- Connector Type:
- Multi-pin connector (D-sub style)
- Form Factor:
- Module / DIN-rail mountable
- Date Code:
- 0002C
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Unit only; no cables included. Inspected and in good condition.
- Condition Notes:
- Mitsubishi A6TBX36 PLC Terminal Board. Inspected and in good used condition. Housing intact, terminals and connector clean, normal light wear from prior use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Mitsubishi A6TBX70 Terminal Board 70-Point Sink Input MELSEC A-Series PLC
Mitsubishi
$50.00Was: $100.00Mitsubishi A6TBX70 Terminal Board 70-Point Sink Input MELSEC A-Series PLCThe Mitsubishi Electric A6TBX70 is a 70-point sink-input terminal board designed for use with Mitsubishi MELSEC A-series...48098- SKU:
- 48098
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- A6TBX70
- MPN:
- A6TBX70
- Type:
- PLC Terminal Board / I/O Expansion Module
- SKU:
- 48098
- Series:
- MELSEC A-Series
- Input Type:
- Sink Input
- Number of Points:
- 70
- Compatible With:
- Mitsubishi MELSEC A-Series PLC Systems
- Connector Type:
- Multi-pin ribbon/DIN connector (rear)
- Mounting:
- DIN Rail
- Date Code:
- 0002B
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Terminal board only; inspected and in good condition.
- Condition Notes:
- Mitsubishi A6TBX70 Terminal Board — inspected and in good used condition. Terminal contacts and screw terminals are clean and intact. Light surface wear consistent with normal use. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$50.00Was: $100.00 -
Mitsubishi A2SHCPU Melsec PLC A1S61PN A1SX42 A1SY42 A1SJ61BT11 Module System
Mitsubishi
$525.00Was: $1,100.00Mitsubishi A2SHCPU Melsec PLC A1S61PN A1SX42 A1SY42 A1SJ61BT11 Module SystemA modular Programmable Logic Controller system from Mitsubishi's Melsec A Series. This PLC platform executes industrial...47911- SKU:
- 47911
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- A2SHCPU
- MPN:
- A2SHCPU
- Type:
- Programmable Logic Controller (PLC) System
- SKU:
- 47911
- Series:
- Melsec A Series
- Condition:
- Used – Inspected
- Seller Notes:
- Includes A1S61PN, A2SHCPU, 2x A1SX42, 2x A1SY42, A1SJ61BT11, and 2 keys
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Modular / DIN Rail Mount
- CPU Module:
- A2SHCPU
- Power Supply Module:
- A1S61PN
- Power Supply Input Voltage:
- 100–240V AC
- Power Supply Output Voltage:
- 5V DC, 5A
- Input Module:
- A1SX42 (Qty: 2)
- Output Module:
- A1SY42 (Qty: 2)
- Network/Communication Module:
- A1SJ61BT11 CC-Link Master (Qty: 1)
- Communication Protocol:
- CC-Link
- Number of Modules Included:
- 6 (plus CPU and power supply)
- Keys Included:
- Yes – 2 keys for A2SHCPU key switch
- Compatible With:
- Mitsubishi Melsec A Series base units
- Programming Software:
- GX Developer / MELSAP-II (ladder/SFC)
- Condition Notes:
- Mitsubishi A2SHCPU Melsec PLC system inspected and in good condition. Includes A1S61PN, A2SHCPU, 2x A1SX42, 2x A1SY42, A1SJ61BT11, and 2 keys. Normal wear from prior use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$525.00Was: $1,100.00 -
Mitsubishi MR-J2S-70A-U006 MELSERVO AC Servo Drive 750W 200-230V 3Ph
Mitsubishi
$200.00Was: $400.00Mitsubishi MR-J2S-70A-U006 MELSERVO AC Servo Drive 750W 200-230V 3Ph MELSERVO-J2SAC servo drive and amplifier designed to control Mitsubishi MELSERVO AC servo motors. This 750W unit accepts 200-230V...47331- SKU:
- 47331
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- MR-J2S-70A-U006
- MPN:
- MR-J2S-70A-U006
- Type:
- AC Servo Drive / Servo Amplifier
- SKU:
- 47331
- Series:
- MELSERVO-J2S
- Power Rating:
- 750W
- Input Voltage:
- 200-230V AC
- Input Current:
- 3.8A (3PH+1PH, 50/60Hz); 5.7A (1PH 230V 50/60Hz)
- Input Phase:
- 3-Phase + 1-Phase (200-230V); 1-Phase (230V)
- Input Frequency:
- 50/60 Hz
- Output Voltage:
- 170V
- Output Frequency Range:
- 0-500 Hz
- Output Current:
- 5.1A
- Connector Type:
- DB-15 / D-Sub connectors (CN1A, CN1B, CN2, CN3)
- Number of Connectors:
- 4 (CN1A, CN1B, CN2, CN3)
- Form Factor:
- Wall/Panel Mount
- Country/Region of Manufacture:
- Japan
- Certifications:
- UL, CE
- Seller Notes:
- Tinted cover hinge is broken; otherwise in good used condition.
- Condition Notes:
- Mitsubishi MR-J2S-70A-U006 MELSERVO AC Servo Drive. Used, pulled from a working environment. Good overall condition; tinted cover hinge is broken. All connectors appear intact. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$200.00Was: $400.00 -
Mitsubishi CP30-BA 2-Pole 3A AC/DC Circuit Protector 250VAC 125VDC 2.5kA
Mitsubishi
$15.00Was: $30.00Mitsubishi CP30-BA 2-Pole 3A AC/DC Circuit Protector 250VAC 125VDC 2.5kA2-pole circuit protector manufactured by Mitsubishi Electric. Provides overcurrent protection for AC and DC circuits with a 3A...46908- SKU:
- 46908
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- CP30-BA
- MPN:
- CP30-BA
- Type:
- Circuit Protector
- SKU:
- 46908
- Number of Poles:
- 2
- Current Rating:
- 3A
- Voltage Rating:
- 250VAC / 125VDC
- AC Voltage Rating:
- 220V AC
- Interrupting Capacity:
- 2.5kA
- Insulation Voltage (Ui):
- 250VAC / 125VDC
- Ambient Temperature Rating:
- 40°C
- Trip Curve:
- M
- Standards Compliance:
- IEC 934, UL, CE
- Mounting Type:
- DIN Rail
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only, as shown in photos.
- Series:
- CP30
- Condition Notes:
- Mitsubishi CP30-BA 2-pole 3A circuit protector. Inspected and in good used condition. Minor surface scuffs from normal use. Label intact and legible. Terminal clamps and toggle undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$15.00Was: $30.00 -
Mitsubishi A1S38B MELSEC-A PLC Base Unit A2USHCPU-S1 A1S62DA RS-232 NET
Mitsubishi
$750.00Was: $1,500.00Mitsubishi A1S38B MELSEC-A PLC Base Unit A2USHCPU-S1 A1S62DA RS-232 NETThis is a Mitsubishi MELSEC-A Series A1S38B programmable logic controller base unit, fully populated with eight I/O and...46790- SKU:
- 46790
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Mitsubishi
- Model:
- A1S38B
- MPN:
- A1S38B
- Type:
- PLC Base Unit / Programmable Logic Controller System
- SKU:
- 46790
- Series:
- MELSEC-A
- CPU Module:
- A2USHCPU-S1
- Power Supply Module:
- A1S61PN
- Input Module:
- A1SX42 (Qty 2)
- Output Module:
- A1SY42 (Qty 2)
- D/A Converter Module:
- A1S62DA
- Serial Comm Module:
- A1SJ71UC24-R2 (RS-232-C)
- Network Module:
- A1SJ71PT32-S3 (MELSEC NET/MINI-S3)
- Blank Module:
- A1SG60
- Number of Slots:
- 8
- Interface Type:
- RS-232-C, MELSEC NET/MINI-S3
- Form Factor:
- DIN Rail / Panel Mount
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes: A1S38B base, A2USHCPU-S1 CPU, A1S61PN PS, 2x A1SX42, 2x A1SY42, A1S62DA, A1SJ71UC24-R2, A1SJ71PT32-S3, A1SG60
- Compatible With:
- Mitsubishi MELSEC-A Series PLC systems
- Condition Notes:
- Mitsubishi A1S38B MELSEC-A PLC base unit inspected and in good condition. All 8 modules present: A2USHCPU-S1 CPU, A1S61PN PS, 2x A1SX42, 2x A1SY42, A1S62DA, A1SJ71UC24-R2, A1SJ71PT32-S3, A1SG60.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$750.00Was: $1,500.00 -
Mitsubishi AX41C MELSEC PLC I/O Unit 12/24VDC 0.3A Remote I/O Module
Mitsubishi
$35.20Was: $200.00Mitsubishi AX41C MELSEC PLC I/O Unit 12/24VDC 0.3A Remote I/O Module Remote I/O expansion module for Mitsubishi MELSEC A Series PLC systems. Operates on 12/24 VDC at 0.3A and mounts on DIN rail or...46749- SKU:
- 46749
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Mitsubishi
- Model:
- AX41C
- MPN:
- AX41C
- Type:
- PLC Remote I/O Module
- SKU:
- 46749
- Series:
- MELSEC A Series
- Voltage Rating:
- 12/24 VDC
- Current Rating:
- 0.3A
- Form Factor:
- DIN Rail / Panel Mount Module
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Module only. Pulled from a larger working system. Not individually tested.
- Country/Region of Manufacture:
- Japan
- Compatible With:
- Mitsubishi MELSEC A Series PLC Systems
- Application:
- Industrial Automation, PLC Remote I/O Expansion
- Condition Notes:
- Mitsubishi AX41C MELSEC PLC I/O Module in used condition. Pulled from a working system but not individually tested. Normal wear. Photos available — contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.20Was: $200.00 -
Mitsubishi MELSEC A1SJHCPU PLC CPU w/ A1SY42 A2SX42 A1SG60 Modules & Cables
Mitsubishi
$275.00Was: $550.00Mitsubishi MELSEC A1SJHCPU PLC CPU w/ A1SY42 A2SX42 A1SG60 Modules & CablesMitsubishi MELSEC A1S Series programmable logic controller CPU unit designed for industrial automation and control...46686- SKU:
- 46686
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Mitsubishi
- Model:
- A1SJHCPU
- MPN:
- A1SJHCPU
- Type:
- Programmable Logic Controller (PLC) CPU Unit
- SKU:
- 46686
- Product Family:
- MELSEC A1S Series
- Input Voltage:
- 100-120VAC / 200-240VAC
- Output Voltage:
- 5VDC 3A
- Form Factor:
- DIN Rail / Base Mount Module
- Included Modules:
- 2x A1SY42, 2x A2SX42, 1x A1SG60
- Output Module:
- A1SY42 (Qty 2)
- Input Module:
- A2SX42 (Qty 2)
- Blank Module:
- A1SG60 (Qty 1)
- Cables Included:
- Yes – field wiring harness with labeled leads
- Compatible With:
- Mitsubishi MELSEC A1S Series PLC base units
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Includes CPU unit, 2x A1SY42, 2x A2SX42, 1x A1SG60, and field wiring harness with labeled leads.
- Condition Notes:
- Mitsubishi MELSEC A1SJHCPU PLC CPU with A1SY42, A2SX42, and A1SG60 modules. Inspected and in good used condition; pulled from a working environment. Includes wiring harness. Normal industrial wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Mitsubishi A171SHCPUN Motion Controller A1SH42-S1 I/O Unit A172B Base
Mitsubishi
$600.00Was: $1,200.00Mitsubishi A171SHCPUN Motion Controller A1SH42-S1 I/O Unit A172B Base Motion controller unit from the MELSEC A1SH series designed for multi-axis servo motion control in industrial automation systems...45627- SKU:
- 45627
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 9.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- A171SHCPUN
- MPN:
- A171SHCPUN
- Secondary Model:
- A1SH42-S1
- Type:
- Motion Controller
- SKU:
- 45627
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes A171SHCPUN CPU unit, A1SH42-S1 I/O unit, and A172B base unit
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Modular / DIN Rail
- Power Requirements:
- AC 100–240V, 50/60Hz, 105VA
- Output Voltage:
- DC 5V 3A; DC 24V 0.6A
- Input Voltage:
- AC 100–240V
- Frequency:
- 50/60Hz
- Series:
- MELSEC A1SH / A171SH Series
- Base Unit:
- A172B
- I/O Module:
- A1SH42-S1
- Compatible With:
- Mitsubishi MELSEC A-Series motion systems
- Application:
- Multi-axis servo motion control
- Certifications:
- CE, UL
- Condition Notes:
- Mitsubishi A171SHCPUN Motion Controller w/ A1SH42-S1 I/O and A172B Base. Inspected, good used condition. Pulled from a working environment where it was in use and functional.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
Mitsubishi MR-J2-40B-S73-A10 AC Servo Amplifier 400W 3Ph 200-230VAC
Mitsubishi
$145.00Was: $300.00Mitsubishi MR-J2-40B-S73-A10 AC Servo Amplifier 400W 3Ph 200-230VACAC servo amplifier for driving Mitsubishi MR-J2 Series servo motors. This 400W unit accepts 3-phase or single-phase input at...45591- SKU:
- 45591
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- MR-J2-40B-S73-A10
- MPN:
- MR-J2-40B-S73-A10
- Type:
- AC Servo Amplifier
- SKU:
- 45591
- Series:
- MR-J2
- Power Rating:
- 400W
- Input Voltage:
- 3-Phase 200-230VAC / 1-Phase 230VAC
- Input Current:
- 2.6A (3Ph), 3.9A (1Ph)
- Input Frequency:
- 50/60Hz
- Permissible Voltage Fluctuation:
- 170-253VAC (3-phase)
- Output Voltage:
- 170V, 0-360Hz
- Output Current:
- 2.8A
- Phase:
- Three Phase / Single Phase
- Connector Type:
- DB25 (CN2A, CN2B, CN3, CN2)
- Number of Connectors:
- 4 x DB25 encoder/I-O connectors
- Power Terminals:
- L1, L2, L3 (input); U, V, W (motor output)
- Certifications:
- UL Listed 88R2, CE, TUV Rheinland
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Panel Mount / DIN Rail
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only. Inspected and in good condition.
- Compatible With:
- Mitsubishi MR-J2 Series Servo Motors
- Application:
- Motion Control, CNC, Robotics, Industrial Automation
- Condition Notes:
- This Mitsubishi MR-J2-40B-S73-A10 AC Servo Amplifier has been inspected and appears to be in good condition. Housing is clean with light surface wear. All connectors and terminals appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$145.00Was: $300.00 -
Mitsubishi MR-J2-40B-A10 Melservo AC Servo Drive Amplifier 400W 200-230V
Mitsubishi
$225.00Was: $450.00Mitsubishi MR-J2-40B-A10 Melservo AC Servo Drive Amplifier 400W 200-230VAC servo drive amplifier from Mitsubishi's Melservo MR-J2 series. Accepts three-phase or single-phase AC input and drives...45590- SKU:
- 45590
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- MR-J2-40B-A10
- MPN:
- MR-J2-40B-A10
- Secondary Model:
- MR-J2-40B
- Type:
- AC Servo Drive Amplifier
- Series:
- Melservo MR-J2
- SKU:
- 45590
- Power Rating:
- 400W
- Input Voltage:
- 3PH 200-230V 50/60Hz; 1PH 230V 50/60Hz
- Permissible Voltage Range:
- 3PH 170-253V AC
- Input Current:
- 2.6A (3PH); 3.9A (1PH)
- Output Voltage:
- 170V, 0-360Hz, 2.8A
- Phase:
- Three Phase / Single Phase
- Frequency:
- 50/60Hz
- Connectors:
- CN1-A, CN1-B, CN2, CN3 (26-pin D-sub x4); L1/L2/L3 power terminal
- Output Terminals:
- U, V, W motor output terminal block
- Display:
- 2-digit 7-segment LED (J2-F02B front panel board)
- Certifications:
- UL Listed (8BR2), CE, TÃœV Rheinland Type Approved
- Country/Region of Manufacture:
- Japan
- Form Factor:
- DIN Rail / Panel Mount
- Condition:
- Used – Powers On, Not Fully Tested
- Seller Notes:
- Unit powers on. No accessories included. Sold as-is for servo drive.
- Condition Notes:
- Mitsubishi MR-J2-40B-A10 Melservo AC Servo Drive — powers on, full functional test not performed. Good cosmetic condition; connectors and terminals intact. Sold used, as-inspected. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$225.00Was: $450.00 -
Mitsubishi MD-60TE Line Cool Spot Air Conditioner 3-Phase 200V 50/60Hz 5.6kW
Mitsubishi
$600.00Was: $1,200.00Mitsubishi MD-60TE Line Cool Spot Air Conditioner 3-Phase 200V 50/60Hz 5.6kWPortable spot cooling unit designed for targeted temperature control in industrial and commercial environments. Operates on...45564- SKU:
- 45564
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 240.00 LBS
- Brand:
- Mitsubishi
- Model:
- MD-60TE
- MPN:
- MD-60TE-L
- Secondary Model:
- MD-60
- Type:
- Portable Spot Air Conditioner
- SKU:
- 45564
- Seller Notes:
- Includes mobile wheeled cart. Power cables are cut at the unit.
- Country/Region of Manufacture:
- Japan
- Power Requirements:
- 3-Phase, 200V, 50/60 Hz
- Voltage:
- 200V
- Phase:
- Three Phase
- Frequency:
- 50/60 Hz
- Cooling Capacity:
- 5.6/6.3 kW (50/60 Hz)
- Power Consumption:
- 2.00/2.70 kW (50/60 Hz)
- Running Current:
- 7.2/8.7 A (50/60 Hz)
- Power Factor:
- 80/90%
- Refrigerant:
- R22, 1.25 kg
- Compressor Output:
- 1.3 kW
- Fan Motor Output:
- 0.35 kW
- Fan Motor Model:
- A.O. Smith F48SQ4L5
- Fan Motor HP:
- 3/4 HP
- Fan Motor RPM:
- 1625/3 SPD
- Fan Motor Voltage:
- 208-230V
- Fan Motor Frequency:
- 60 Hz
- Fan Motor Frame:
- 48Y
- Form Factor:
- Portable / Mobile Cart
- Condition:
- Used – Pulled from Working Environment, Power Cables Cut
- Compatible Duct Accessories:
- PAC-294FD, PAC-064LD, PAC-296LD and others (see side label)
- Condition Notes:
- Mitsubishi MD-60TE Line Cool spot air conditioner in good used condition; pulled from working environment. Power cables are cut at the inlet — requires rewiring before use. 3-phase 200V. Mobile cart included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
Mitsubishi WEPR10 DC280179D 8-Bit ISA Parallel Interface Card DB25 Vintage PC
Mitsubishi
$20.00Was: $40.00Mitsubishi WEPR10 DC280179D 8-Bit ISA Parallel Interface Card DB25 Vintage PCThe Mitsubishi WEPR10 is an 8-bit ISA parallel interface card designed to add or restore a standard parallel port to IBM...43615- SKU:
- 43615
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Mitsubishi
- Model:
- WEPR10
- MPN:
- DC280179D
- SKU:
- 43615
- Type:
- ISA Parallel Interface Card
- Bus Type:
- 8-Bit ISA
- Interface:
- Parallel (DB25)
- Connector Type:
- DB25 Female
- Form Factor:
- Half-Length ISA Card
- I/O Address:
- 0378H or 0278H (DIP switch selectable)
- DIP Switch:
- 6-position DTS-6 MCC switch (SW1, SW2)
- Logic ICs:
- M74LS240P (x4), M74LS174P, 5060D6, 5170D2
- PCB Revision:
- Rev A (D, C, R, A markings visible on PCB)
- Compatible With:
- IBM PC, XT, and compatible 8-bit ISA systems
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Card only; no cables or accessories included.
- Condition Notes:
- Mitsubishi WEPR10 DC280179D 8-bit ISA parallel interface card. Inspected and in good condition. PCB clean, DB25 and ISA edge connector intact. DIP switches present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $40.00 -
Mitsubishi STU600F Diaguide 80ft Pure Silica Core Fiber Optic Cable 600µm 488nm
Mitsubishi
$275.00Was: $550.00Mitsubishi STU600F Diaguide 80ft Pure Silica Core Fiber Optic Cable 600µm 488nmStep-index silica fiber optic transmission cable designed for laser light delivery and optical testing. Features an...35188- SKU:
- 35188
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Mitsubishi
- Model:
- STU600F
- MPN:
- STU600F
- Type:
- Fiber Optic Transmission Cable
- SKU:
- 35188
- Seller Notes:
- Includes AR-coated collimator end fitting; 80ft braided cable
- Country/Region of Manufacture:
- Japan
- Series:
- Diaguide ST Series
- Fiber Type:
- Step Index (SI), Pure Silica Core
- Core Diameter:
- 600 µm
- Fiber Diameter (Clad):
- 750 µm
- Cable Length:
- 80 ft (approx. 24 m)
- Wavelength:
- 488 nm
- End Fitting / Connector:
- AR-Coated Collimator (one end); bare ferrule (other end)
- Jacket / Protection:
- Braided protective jacket with metal armor at ends
- Manufacturing Method:
- Modified Rod-in-Tube
- Application / Use Case:
- Laser light delivery, spectroscopy, fluorescence, optical testing
- Condition:
- Used – Inspected and in Good Condition
- Condition Notes:
- Mitsubishi STU600F Diaguide 80ft silica fiber optic cable. Inspected and in good condition. No kinks or folds; light transmission confirmed with 1mW laser and white light during inspection. AR collimator end intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Mitsubishi MF355F-3490UC 1.44MB 3.5" Floppy Drive Compaq 160788-201 3-Mode
Mitsubishi
$28.00Was: $60.00Mitsubishi MF355F-3490UC 1.44MB 3.5" Floppy Drive Compaq 160788-201 3-ModeThe Mitsubishi Electric MF355F-3490UC is a 3.5-inch 1.44MB internal floppy disk drive listed as a Compaq spare part under...15165- SKU:
- 15165
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- MF355F-3490UC
- MPN:
- 160788-201
- Secondary Model:
- 172464-001
- SKU:
- 15165
- Type:
- Internal Floppy Disk Drive
- Storage Capacity:
- 1.44 MB
- Form Factor:
- 3.5-inch Slim Internal
- Drive Mode:
- 3-Mode
- Interface:
- 34-pin Floppy (IDC Ribbon)
- Compatible With:
- Compaq Deskpro, Presario, and compatible systems
- Condition:
- Used – Inspected, Not Bench-Tested
- Seller Notes:
- Compaq spare part 160788-201; drive only, no cables included
- Country/Region of Manufacture:
- Thailand
- Condition Notes:
- Mitsubishi MF355F-3490UC 1.44MB 3.5" floppy drive, used. Light wear, intact housing and faceplate, no major damage. See photos for details.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
Mitsubishi AY51C MELSEC PLC Output Module 12/24VDC 0.3A Servo Motor Control
Mitsubishi
$64.00Was: $200.00Mitsubishi AY51C MELSEC PLC Output Module 12/24VDC 0.3A Servo Motor Control Transistor output module designed for Mitsubishi MELSEC A Series PLC systems. Provides 12/24VDC control output at 0.3A for...46748- SKU:
- 46748
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Mitsubishi Electric
- Model:
- AY51C
- MPN:
- AY51C
- SKU:
- 46748
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Module only; pulled from a larger working system; untested
- Form Factor:
- Card / Module
- Compatible With:
- Mitsubishi MELSEC A Series PLC Systems
- Country of Manufacture:
- Japan
- Power Requirements:
- DC 12V / 24V, 0.3A
- Voltage Rating:
- 12/24 VDC
- Current Rating:
- 0.3A
- Module Type:
- Transistor Output Module
- Application:
- Servo Motor Control
- Series:
- MELSEC A Series
- Certifications:
- UL Listed 80M1, CE
- Date Code:
- 9908G (August 1999)
- Condition Notes:
- This Mitsubishi AY51C MELSEC PLC Output Module was pulled from a larger working system but has not been powered up or bench-tested at our facility. The module shows typical wear consistent with industrial use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$64.00Was: $200.00