Description
Mitsubishi S-N35 Magnetic Contactor 35A 3-Pole 220V w/ TH-N20TAKP Overload Relay
This is a 3-pole magnetic contactor rated for 35A at 220V coil voltage, supplied with an integrated TH-N20TAKP thermal overload relay. The unit is designed for industrial motor control and power switching applications.
Specifications & What's Included
- Brand: Mitsubishi Electric
- Model: S-N35 (MPN: S-N35)
- Type: IEC Magnetic Contactor with Thermal Overload Relay
- Voltage Rating: 220V Coil
- Current Rating: 35A
- Poles: 3-Pole
- Overload Relay: TH-N20TAKP (Thermal)
- AC Rating: AC-6480A
- Form Factor: DIN Rail / Panel Mount
- Wiring leads still attached
Applications
Mitsubishi S-N series contactors are used in industrial motor control systems for switching and protecting three-phase AC motors. These units are commonly found in factory automation, machinery control panels, and power distribution equipment. The S-N35 with thermal overload relay provides both switching and motor overload protection in a single assembly.
Condition: Used
This Mitsubishi S-N35 Magnetic Contactor with TH-N20TAKP Thermal Overload Relay was recently removed from a large industrial controller system and is in good used condition. The unit shows typical wear consistent with service use — including grime accumulation on the body and terminal blocks, and general soiling on the wiring insulation — but no visible structural damage or broken components. The TH-N20TAKP overload relay remains attached and intact, with the trip and reset buttons present. Wiring leads are still attached from the prior installation; buyers should inspect lead lengths and termination suitability for their application. Please view our photo set and contact us if you have any questions.
This Mitsubishi S-N35 Magnetic Contactor with TH-N20TAKP Thermal Overload Relay was recently removed from a large industrial controller system and is in good used condition. The unit shows typical wear consistent with service use — including grime accumulation on the body and terminal blocks, and general soiling on the wiring insulation — but no visible structural damage or broken components. The TH-N20TAKP overload relay remains attached and intact, with the trip and reset buttons present. Wiring leads are still attached from the prior installation; buyers should inspect lead lengths and termination suitability for their application. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Mitsubishi Electric |
Model: |
S-N35 |
MPN: |
S-N35 |
Secondary Model: |
TH-N20TAKP |
Type: |
Magnetic Contactor with Thermal Overload Relay |
SKU: |
53209 |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Includes Mitsubishi TH-N20TAKP thermal overload relay mounted to contactor |
Country/Region of Manufacture: |
Japan |
Voltage Rating: |
220V Coil |
Current Rating: |
35A |
Number of Poles: |
3-Pole |
Contactor Type: |
IEC Magnetic Contactor |
Overload Relay Model: |
TH-N20TAKP |
Overload Relay Type: |
Thermal Overload Relay |
AC Rating: |
AC-6480A (visible on label) |
Form Factor: |
DIN Rail / Panel Mount |
Compatible With: |
Mitsubishi S-N Series Motor Starters |
Application: |
Industrial Motor Control, Power Switching |
Condition Notes: |
This Mitsubishi S-N35 Magnetic Contactor with TH-N20TAKP Thermal Overload Relay was recently removed from a large industrial controller system and is in good used condition. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
