Microdyne
-
Microdyne 1111-VT(70)(D)10 RF Tuner 52-88 MHz For Parts Crystal Select
Microdyne
$150.00Was: $300.00Microdyne 1111-VT(70)(D)10 RF Tuner 52-88 MHz For Parts Crystal SelectVHF RF tuner module for broadcast and telecom applications. Covers 52-88 MHz band with crystal select, local, and remote tuning...39336- SKU:
- 39336
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Microdyne
- Model:
- 1111-VT(70)(D)10
- MPN:
- 111VT(70)(D)10
- Type:
- RF Tuner Module
- SKU:
- 39336
- Frequency Range:
- 52-88 MHz
- Frequency Band:
- VHF
- Tuning Mode:
- Crystal Select / Local / Remote
- Connector Type:
- D-Sub (P1), BNC (J1)
- Form Factor:
- Rack-mount module / enclosed chassis
- Hardware Revision:
- REV M62
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold for parts or repair. Top cover removed; internal PCB visible.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Microdyne 1111-VT(70)(D)10 RF Tuner 52-88 MHz sold as-is for parts or repair. Not tested; top cover removed and internal PCB exposed. Front panel controls and rear connectors appear intact. No functionality guaranteed.
$150.00Was: $300.00 -
Microdyne 1111-VT(70)(D)(10) RF Tuner 52-88 MHz Crystal Select For Parts
Microdyne
$225.00Was: $450.00Microdyne 1111-VT(70)(D)(10) RF Tuner 52-88 MHz Crystal Select For PartsVHF RF tuner module designed for telecom and broadcast applications. Operates across the 52-88 MHz band with crystal select...39447- SKU:
- 39447
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Microdyne Corporation
- Model:
- 1111-VT(70)(D)(10)
- MPN:
- 1111VT(70)D10
- Secondary Model:
- 303-645
- SKU:
- 39447
- Type:
- VHF RF Tuner Module
- Frequency Range:
- 52-88 MHz
- Tuning Method:
- Crystal Select / Remote Tuning
- Interface Type:
- D-Sub (P1), BNC (J1)
- Connector 1:
- D-Sub multi-pin (P1) — rear panel
- Connector 2:
- BNC (J1) — rear panel
- Front Panel Controls:
- Crystal Select dial, Local/RMT switch, Tuning knob
- Front Panel Display:
- Frequency MHz display window
- Form Factor:
- Rack/Chassis Module
- Associated Component:
- Amtex Research Inc. (ARI) board, Model Microdyne 303-645
- Country/Region of Manufacture:
- United States
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold as-is for parts or repair. Includes internal ARI board (Microdyne 303-645).
- Condition Notes:
- Microdyne 1111-VT(70)(D)(10) RF Tuner sold as-is for parts or repair. Not tested, no functionality guarantee. Minor surface wear. Internal ARI board (Microdyne 303-645) present. D-sub and BNC connectors appear intact.
$225.00Was: $450.00 -
Microdyne 1400-MR Telemetry Receiver 50-90 MHz w/ 1420-I & 1411-VT(70) Plug-Ins
Microdyne
$425.00Was: $850.00Microdyne 1400-MR Telemetry Receiver 50-90 MHz w/ 1420-I & 1411-VT(70) Plug-InsThe Microdyne 1400-MR is a modular FM/PM telemetry receiver designed for professional ground-station data...39393- SKU:
- 39393
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 52.00 LBS
- Brand:
- Microdyne
- Model:
- 1400-MR
- MPN:
- 105-316-81
- Type:
- Telemetry Receiver
- SKU:
- 39393
- Condition:
- Used – Inspected
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rackmount
- Power Requirements:
- 120VAC, 50-400Hz, 1.5A
- RF Frequency Range:
- 50-90 MHz (1411-VT(70) plug-in)
- IF Bandwidth:
- 100 kHz (1420-I plug-in)
- Plug-In Module 1:
- 1420-I IF Filter Amplifier, 100 kHz
- Plug-In Module 2:
- 1411-VT(70) RF Tuner, 50-90 MHz
- Number of Plug-In Slots:
- 2 (Slot A empty; 2 plug-ins installed)
- Demodulator Modes:
- FM, AM, AFC, APC, VFO, XTAL, EXT
- Interface / Connectivity:
- RS-232 (J26), Accessory (J20), BNC
- Rear Outputs:
- AM Out, SDU Out, Record Out, AGC, Video, LIN 1/2
- MPU PCB:
- A23-U1, P/N 105-939-051
- PROM Configuration Date:
- 11/95
- Serial Number:
- 1077
- Manufacturer Location:
- Ocala, Florida
- Compatible With:
- Microdyne 1400 series plug-in modules
- Application:
- Aerospace, military, range telemetry data acquisition
- Seller Notes:
- Includes 1420-I IF Filter Amp and 1411-VT(70) RF Tuner plug-ins; Slot A empty
- Condition Notes:
- Microdyne 1400-MR Telemetry Receiver inspected, in good used condition. Includes 1420-I IF Filter Amp (100 kHz) and 1411-VT(70) RF Tuner (50-90 MHz) plug-ins. Slot A empty. Normal wear.
$425.00Was: $850.00 -
Microdyne 1400-MR Telemetry Receiver 105-316-81 with 1451-D 1420-I 1411-VT 70
Microdyne
$450.00Was: $2,500.00Microdyne 1400-MR Telemetry Receiver 105-316-81 with 1451-D 1420-I 1411-VT(70) Includes the following plug ins: 1451-D MC Demoduklator 1420-I Serues IF Filter Amplifier 1411-VT(70) RF Tuner...39380- SKU:
- 39380
- Weight:
- 60.00 LBS
$450.00Was: $2,500.00 -
Microdyne 1400-MR 106-912-01 Telemetry Receiver PM Demod RF Tuner 50-90MHz 4U
Microdyne
$525.00Was: $1,100.00Microdyne 1400-MR 106-912-01 Telemetry Receiver PM Demod RF Tuner 50-90MHz 4URack-mount telemetry receiver designed for satellite and RF signal demodulation across the 50–90 MHz band. Processes...39335- SKU:
- 39335
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 60.00 LBS
- Brand:
- Microdyne
- Model:
- 1400-MR
- MPN:
- 106-912-01
- Secondary Model:
- 1400-MRA
- Type:
- Telemetry Receiver
- SKU:
- 39335
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes PM Demodulator 1451-D, IF Filter Amp 1420-I, RF Tuner 1411-VT(70)
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rack Mount, 4U, 19-inch
- Power Requirements:
- 120V AC, 50–60 Hz, 1.5A SLC-BLC
- RF Frequency Range:
- 50–90 MHz (VT Tuner)
- Plugin Module 1:
- PM Demodulator – 1451-D
- Plugin Module 2:
- IF Filter Amplifier – 1420-I Series
- Plugin Module 3:
- RF Tuner – 1411-VT(70), 50–90 MHz
- Interface / Connectivity:
- RS-232 (J2G), Accessory Port (J2C), BNC outputs
- Demodulation Modes:
- FM, PM, AFC, VFO, XTAL, 2nd LO
- Bandwidth Options:
- 0.100, 0.500, 1.00 MHz, N/U
- Output Types:
- AM, SDU, Record, Pre-D, CFM, Video, AGC
- PROM Config Date:
- 4-17-90
- PROM Part Number:
- 106-261-77
- Application:
- Satellite / SatCom / Microwave / RF Telemetry
- Compatible With:
- 19-inch EIA standard rack enclosures
- Loop Width Settings:
- 2B, 30, 100, 300, 1K, 3K, 10K Hz
- Condition Notes:
- Microdyne 1400-MR Telemetry Receiver pulled from a working environment where it was in active use and functional. Inspected and in good used condition. All three plugin modules present. Please contact us with questions.
$525.00Was: $1,100.00 -
Microdyne 1151-D(B)(B) Anti-Sideband Wide Angle PM Demodulator Satcom RF
Microdyne
$200.00Was: $400.00Microdyne 1151-D(B)(B) Anti-Sideband Wide Angle PM Demodulator Satcom RFPhase modulation demodulator module designed for satellite communications earth station systems. Recovers phase-modulated...39322- SKU:
- 39322
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Microdyne
- Model:
- 1151-D(B)(B)
- MPN:
- 1N51D(B)(B)D
- Type:
- Wide Angle Anti-Sideband PM Demodulator
- SKU:
- 39322
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no accessories observed. Photos show unit as-received.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Modular / Plug-In Module
- Modulation Type:
- Phase Modulation (PM)
- Demodulator Mode:
- Anti-Sideband Wide Angle / Wide Band
- Loop Bandwidth Range:
- 10, 30, 100, 300, 1000 Hz (switchable)
- Loop Modes:
- Open Loop / Closed Loop
- Search Mode:
- Auto / Manual Search
- AGC Modes:
- NORM / TRACK
- Output Type:
- PM Output
- Rear Connector:
- D-Sub 25-pin (P3); PI and TI connectors
- Front Controls:
- Loop Bandwidth switch, Fine Tune dial, Loop Lock, Noise, BAL, Lock indicators
- Application:
- RF Satcom Earth Station Systems
- Manufacturer Location:
- Microdyne Corporation, Rockville, MD 20850
- Condition Notes:
- Microdyne 1151-D(B)(B) Wide Angle PM Demodulator. Inspected, in good used condition. Pulled from a working satcom environment. Surface scratches on enclosure; front-panel controls and rear D-Sub connector intact.
$200.00Was: $400.00 -
Microdyne 1400-MR Telemetry Receiver 1451-D 1420-I 1411-V Plug-Ins 120VAC
Microdyne
$500.00Was: $2,500.00Microdyne 1400-MR Telemetry Receiver 1451-D 1420-I 1411-V Plug-Ins 120VACRack-mount telemetry receiver chassis from Microdyne designed for PCM/FM/IRIG signal reception in aerospace and defense...36045- SKU:
- 36045
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 55.00 LBS
- Brand:
- Microdyne
- Model:
- 1400-MR
- MPN:
- 105-316-01
- Type:
- Telemetry Receiver
- SKU:
- 36045
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes 1451-D, 1420-I, 1411-V plug-ins. Special power cable not included.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rack Mount
- Power Requirements:
- 120 VAC, 50–400 Hz
- Plug-In Module 1:
- 1451-D PM Demodulator
- Plug-In Module 2:
- 1420-I IF Filter Amplifier (1420-I Series)
- Plug-In Module 3:
- 1411-VT(70) RF Tuner, 50–90 MHz
- RF Tuner Frequency Range:
- 50–90 MHz
- Demodulator Type:
- PM Demodulator
- IF Filter Amplifier Bandwidth:
- 100, 300 kHz, N/U, N/U
- Configuration:
- RX6 G1-2
- Interface / Output:
- RS-232, BNC, D-Sub, 4-pin power connector
- Compatible With:
- Microdyne 1400-series telemetry receiver chassis
- Application:
- PCM/FM/IRIG telemetry reception, aerospace, defense
- Condition Notes:
- Microdyne 1400-MR Telemetry Receiver sold as-is for parts/repair. Powers on and lights up but requires a special power cable (not included); full function unconfirmed. Includes 1451-D, 1420-I, 1411-V plug-ins.
$500.00Was: $2,500.00