LNR

LNR

  • LNR Communications HCL/4 E-Band WR-229 hot cold RF load in wooden carry case with waveguide arm extended — front-right three-quarter view LNR Communications HCL/4 WR-229 hot cold load — left-side view of wooden case showing lid hinge and waveguide arm with flange

    LNR Communications HCL/4 E-Band WR-229 Hot Cold Load RF Attenuator Portable

    LNR

    $230.00
    Was: $500.00
    LNR Communications HCL/4 E-Band WR-229 Hot Cold Load RF Attenuator Portable The LNR Communications HCL/4 is a portable E-Band hot/cold noise calibration load designed for waveguide measurements in...
    50269
    SKU:
    50269
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    LNR Communications
    Model:
    HCL/4
    MPN:
    HCL/4
    Type:
    E-Band Hot/Cold Waveguide RF Calibration Load
    SKU:
    50269
    Waveguide Size:
    WR-229
    Frequency Band:
    E-Band
    Connector Type:
    WR-229 Waveguide Flange
    Form Factor:
    Portable / Handheld (wooden carry case)
    Country/Region of Manufacture:
    United States
    Application:
    Noise Figure Calibration, Radiometer Calibration
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes WR-229 waveguide transition arm and wooden carry case
    Condition Notes:
    LNR Communications HCL/4 WR-229 E-Band hot/cold RF load inspected and in good used condition. Pulled from a working environment. Wooden case, interior cavity, brass load, and waveguide arm all appear intact and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $230.00
    Was: $500.00
  • LNR 506004259 Tridundant LNA Remote Channel Select Monitor – front panel overview showing summary alarm LEDs and LNA controls LNR 506004259 Tridundant LNA Remote Channel Select Monitor – rear three-quarter view showing D-sub Remote Input and Ext Mon & Control connectors

    LNR 506004259 Tridundant LNA Remote Channel Select Monitor Satcom 19" 2U

    LNR

    $275.00
    Was: $550.00
    LNR 506004259 Tridundant LNA Remote Channel Select Monitor Satcom 19" 2ULow Noise Amplifier (LNA) remote channel selector and monitoring unit for satellite ground stations. Manages three LNA channels...
    49840
    SKU:
    49840
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    LNR Communications
    Model:
    506004259
    MPN:
    506004259
    Secondary Model:
    Code Ident 51029
    SKU:
    49840
    Type:
    Tridundant LNA Remote Channel Select & Monitor
    Form Factor:
    19" Rackmount, 2U
    Number of LNA Channels:
    3 (LNA 1, LNA 2, LNA 3)
    Redundancy Configuration:
    Tridundant (1:3)
    Polarization Select:
    Polarization 1 & Polarization 2 Select
    LNA Mode Select:
    Local/Remote and Manual/Auto
    Status Indicators:
    On Line / Stand By per LNA; Summary Alarm LEDs
    Interface - Remote Input:
    D-sub connector (J1 Remote Input)
    Interface - Ext Mon & Control:
    D-sub connector (J2 Ext Mon & Control)
    Application:
    Satellite Ground Station LNA Switching & Monitoring
    Condition:
    Used – Tested-Good Spare from SatCom Facility
    Seller Notes:
    Unit only; tested-good spare from a SatCom facility
    Country/Region of Manufacture:
    United States
    Compatible With:
    Satcom ground station LNA systems requiring tridundant switching
    Condition Notes:
    LNR 506004259 Tridundant LNA Remote Channel Select & Monitor in good used condition. Tested-good spare from a SatCom facility. Chassis shows light rack wear; front panel controls and rear connectors intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • LNR 506011300-2 Redundant Baseball Switch Control – front panel and top cover, 1U rackmount angled view LNR 506011300-2 Redundant Switch Control – rear panel showing Remote Control and Monitor D-Sub, Conv 1 DB-15, Conv 2 DB-9, and BNC connectors

    LNR 506011300-2 Redundant Baseball Switch Control RF Satcom 1U Rackmount

    LNR

    $250.00
    Was: $500.00
    LNR 506011300-2 Redundant Baseball Switch Control RF Satcom 1U Rackmount1U rackmount redundant switching controller for RF satellite communications systems. Provides manual baseball-style...
    49790
    SKU:
    49790
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    LNR Communications
    Model:
    506011300-2
    MPN:
    506011300-2
    SKU:
    49790
    Type:
    Redundant Baseball Switch Controller
    Application:
    RF Satellite Communications (Satcom) Redundancy Switching
    Form Factor:
    1U Rackmount
    Rack Size:
    19-inch
    Dimensions:
    22" x 19" x 2" (D x W x H)
    Front Panel Controls:
    SELECT (Normal/Cross), ALARMS (Unit 1/Unit 2), MODE switch
    Switch Positions:
    Normal, Cross (baseball-style waveguide/coax switch)
    Alarm Indicators:
    Unit 1 and Unit 2 LED alarm indicators
    Mode:
    Manual (MAN) mode switch on front panel
    RF Connector Type:
    BNC (Inputs: Unit 1, Unit 2; Outputs: Unit 1, Unit 2)
    Number of RF Ports:
    4 BNC (2 inputs, 2 outputs)
    Rear Interfaces:
    Remote Control and Monitor (D-Sub), Conv 1 (DB-15), Conv 2 (DB-9)
    Remote Control Interface:
    D-Sub multi-pin connector (Remote Control and Monitor)
    Converter Interfaces:
    Conv 1 (DB-15), Conv 2 (DB-9)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from working satcom system. No accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    LNR 506011300-2 Redundant Baseball Switch Control, inspected and in good used condition. Pulled from a working satcom environment. Shows light rack wear; front panel, switch, and connectors intact. Photos available.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $250.00
    Was: $500.00
  • LNR 506010030 C-Band Dual Conversion Downconverter – front panel view showing LED frequency display and keypad in 1U rack chassis LNR 506010030 Downconverter – rear panel view showing N-type RF connector, D-sub connector, and cooling vents

    LNR 506010030 C-Band Low Phase Noise Dual Conversion Downconverter 30-Ch

    LNR

    $100.00
    Was: $200.00
    LNR 506010030 C-Band Low Phase Noise Dual Conversion Downconverter 30-ChC-Band dual conversion downconverter with 30 user-programmable channels and low phase noise performance. Designed for satellite...
    49637
    SKU:
    49637
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    24.00 LBS
    Brand:
    LNR Communications
    Model:
    506010030
    MPN:
    506010030
    Type:
    C-Band Dual Conversion Downconverter
    SKU:
    49637
    Condition:
    Used – Pulled from Working Environment
    Revision:
    Rev H
    Frequency Band:
    C-Band
    Conversion Type:
    Dual Conversion
    Number of Channels:
    30 User Programmable
    Phase Noise:
    Low Phase Noise
    Form Factor:
    1U Rackmount
    Front Panel Display:
    LED Channel and Frequency MHz display
    Front Panel Controls:
    Numeric keypad, CL, RCL, FREQ, CHAN, TEST/DISP buttons
    Alarm Monitors:
    RF LO, IF LO, +24V, GND, SUM
    LO Monitor Points:
    LOC LO, REM LO, IF, RF (front panel BNC)
    AC Power Switch:
    Front panel ON/OFF switch with green LED indicator
    Rear Connectors:
    N-type RF connector, D-sub connector, coax LO port
    Application:
    Earth Station, Satellite Ground Station, C-Band Receive
    Seller Notes:
    Unit only; deinstalled from an Earth Station. No accessories.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    LNR 506010030 C-Band Dual Conversion Downconverter deinstalled in working condition from an Earth Station. Powers on; front panel LED display and AC power indicator active. Chassis shows normal rack-service wear. Sold as used.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • LNR DC4-D1 Down Converter 4U rackmount chassis front panel showing two DC4-D1 down converter modules and center CONTROL section with mode select, alarm indicators, and BNC connectors LNR DC4-D1 Down Converter 4U aluminum rackmount chassis rear/top view showing ventilation mesh, cooling fans, and power cabling

    LNR DC4-D1 Down Converter 4U Rack Chassis SMI SM7-219-1 Coax Switch For Parts

    LNR

    $175.00
    Was: $350.00
    LNR DC4-D1 Down Converter 4U Rack Chassis SMI SM7-219-1 Coax Switch For PartsSatellite L-band down converter system in 4U rackmount chassis. Converts RF signals to intermediate frequency for...
    36047
    SKU:
    36047
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    75.00 LBS
    Brand:
    LNR Communications
    Model:
    DC4-D1
    MPN:
    DC4-D1
    Secondary Model:
    SM7-219-1
    Type:
    Satellite Down Converter with Coax Switch
    SKU:
    36047
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes 2x DC4-D1 down converters, 1x 51029-004112 assembly, 1x 004002-2 4U aluminum chassis, 1x SMI SM7-219-1 coax switch
    Form Factor:
    4U Rackmount
    Chassis Part Number:
    004002-2
    Assembly Part Number:
    51029-004112
    Coax Switch Model:
    SMI SM7-219-1
    Coax Switch Type:
    Baseball-style coax switch
    Dimensions:
    24" x 19" x 7" (4U)
    Rack Size:
    19-inch, 4U
    Country/Region of Manufacture:
    United States
    Application:
    Satellite communications (SATCOM), L-band signal downconversion
    Interface / Connectors:
    BNC, SMA, DB25, DB9 (visible on rear panel)
    Alarm Outputs:
    Summary, RF LO, IF LO, +24 VDC alarm indicators
    Monitor Functions:
    RF LO, IF LO, +24 VDC monitor points
    LO Select:
    INT / AUX switchable
    Control Panel:
    Dedicated CONTROL module with Mode Select and Output Select
    Power Status:
    Does not power on — sold for parts or repair
    Condition Notes:
    LNR DC4-D1 Down Converter does not power on. Sold as-is for parts or repair — no functionality guarantee. Chassis and modules show normal service wear; connectors appear intact. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • LNR UC6-D1 dual C-Band redundant upconverter system front panel view showing two UP CONVERTER modules and center CONTROL section LNR UC6-D1 left upconverter front panel close-up showing alarm indicators, BNC test and monitor ports, LO select, power switch, and 4826.7 MHz / 1042.5 MHz LO frequency labels

    LNR UC6-D1 C-Band Redundant Satcom Upconverter System 004003-1 004003-2

    LNR

    $850.00
    Was: $1,700.00
    LNR UC6-D1 C-Band Redundant Satcom Upconverter System 004003-1 004003-2The LNR Communications UC6-D1 is a dual 1:1 redundant C-Band satellite upconverter system manufactured by LNR Communications Inc...
    31562
    SKU:
    31562
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    75.00 LBS
    Brand:
    LNR Communications
    Model:
    UC6-D1
    MPN:
    004003-1 / 004003-2
    Secondary Model:
    004003-2
    SKU:
    31562
    Type:
    Dual Redundant C-Band Satellite Upconverter System
    Frequency Band:
    C-Band
    Configuration:
    1:1 Redundant (Dual Upconverter + Control)
    Number of Upconverters:
    2
    LO Frequency 1:
    4826.7 MHz
    LO Frequency 2:
    1042.5 MHz
    Carrier Frequency Unit 1:
    6245 MHz (visible on label)
    Carrier Frequency Unit 2:
    6045 MHz (visible on label)
    Power Requirements:
    120V AC, 60Hz
    Form Factor:
    Rackmount
    Dimensions:
    27" x 19" x 7"
    Connector Types:
    BNC, N-Type, D-Sub (D-25)
    Rear Ports:
    IF Norm, IF Cross, RF Norm, RF Cross, Ext Mon, Aux LO
    Front Panel Controls:
    Mode Select (Auto/Manual), Output Select (Normal/Cross), LO Select (Int/Aux), CB Reset
    Front Panel Alarms:
    Summary, RF LO, IF LO, +24 VDC
    Manufacturer Location:
    Hauppauge, New York, USA
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Powers on; unable to fully test
    Seller Notes:
    Includes two UC6-D1 upconverter modules (004003-1, 004003-2) in chassis
    Condition Notes:
    LNR UC6-D1 C-Band redundant upconverter system powers on and front panel indicators light up. Full RF/IF performance not verified beyond power-on. Both modules (004003-1, 004003-2) present. Sold as-is beyond power-on confirmation.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $850.00
    Was: $1,700.00
  • LNR Communications CF12 012660-1 rackmount chassis front panel showing three LNA Power Supply plug-in units with ON/OFF switches and Summary Alarm indicators LNR CF12 012660-1 rear view showing three cooling fans and D-sub connectors (J1, J2, J3) on each plug-in unit

    LNR Communications CF12 012660-1 LNA Power Supply Power & Control Module 3x

    LNR

    $200.00
    Was: $400.00
    LNR Communications CF12 012660-1 LNA Power Supply Power & Control Module 3xRackmount chassis containing three plug-in CF12 LNA Power Supply modules. Supplies power and control signals to...
    31431
    SKU:
    31431
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    50.00 LBS
    Brand:
    LNR Communications
    Model:
    CF12
    MPN:
    012660-1
    SKU:
    31431
    Type:
    LNA Power Supply Power & Control Module
    Form Factor:
    Rackmount
    Number of Plug-In Units:
    3
    Plug-In Unit Model:
    CF12 LNA Power Supply
    Front Panel Controls:
    ON/OFF toggle switch, Summary Alarm indicator (per unit)
    Connector Type:
    D-Sub (9-pin and 15-pin), labeled J1, J2, J3 per module
    Cooling:
    Rear-mounted cooling fan per plug-in unit (3 total)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes chassis with 3 installed CF12 LNA Power Supply plug-in units
    Application:
    Satellite LNA / Low-Noise Amplifier Power and Control
    Compatible With:
    Satellite ground station LNA systems
    Condition Notes:
    LNR Communications CF12 012660-1 LNA Power Supply Module with 3 plug-in units. Pulled from working environment, inspected, good condition. Minor surface marks and connector oxidation visible. All 3 units and fans present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00