GNP Computers

GNP Computers

  • GNP Computers PDSi Wide SCSI Terminator 1-502094 Rev A PCB – top view showing 68-pin connector and component side GNP Computers Wide SCSI Terminator 1-502094 Rev A PCB – reverse side showing label with part number and revision

    GNP Computers PDSi Wide SCSI Terminator 1-502094 Rev A PCB Module

    GNP Computers

    $25.00
    Was: $50.00
    GNP Computers PDSi Wide SCSI Terminator 1-502094 Rev A PCB ModuleThis is a Wide SCSI terminator board made by GNP Computers for use with PDSi-series systems. The board carries part number 1-502094,...
    28451
    SKU:
    28451
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    GNP
    Model:
    PDSi
    MPN:
    1-502094
    Type:
    Wide SCSI Terminator PCB Module
    SKU:
    28451
    Interface Type:
    Wide SCSI (68-pin)
    Form Factor:
    PCB Module / Card
    Hardware Revision:
    Rev A
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Terminator board only as shown; no additional accessories included.
    Compatible With:
    PDSi Wide SCSI systems and compatible Wide SCSI bus devices
    Condition Notes:
    GNP Computers PDSi Wide SCSI Terminator 1-502094 Rev A. Inspected and in good used condition. PCB shows light handling wear; no visible damage to board or connector.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • GNP Computers 1-502368 PDSi CPCI SCSI Hot Swap Board – front side showing SCSI connector, LED indicators, and PCB silkscreen with part number and Made in USA marking GNP Computers 1-502368 PDSi CPCI SCSI Hot Swap Board – rear/solder side showing SCSI edge connector, serial number label area, and PCB traces

    GNP Computers 1-502368 PDSi CPCI SCSI Hot Swap Board CompactPCI

    GNP Computers

    $65.00
    Was: $125.00
    GNP Computers 1-502368 PDSi CPCI SCSI Hot Swap Board CompactPCICompactPCI SCSI hot swap board designed for industrial and telecom systems. Supports hot-pluggable SCSI device management within...
    28446
    SKU:
    28446
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    GNP
    Model:
    1-502368
    MPN:
    1-502368
    Type:
    CompactPCI SCSI Hot Swap Board
    SKU:
    28446
    Product Line:
    PDSi
    Bus Interface:
    CompactPCI (CPCI)
    Interface Type:
    SCSI
    Form Factor:
    CompactPCI Card/Module
    Hot Swap:
    Yes
    PCB Revision:
    Rev --
    PCB Date Code:
    991215
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Board only; no cables or accessories included.
    Condition Notes:
    GNP Computers 1-502368 PDSi CPCI SCSI Hot Swap Board. Inspected and in good condition. Normal handling wear; SCSI and edge connectors appear clean and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • GNP Computers 1-501701EM PDSi 10/100 Ethernet Repeater PCB top view showing Lucent sub-board and main ICs GNP Computers 1-501701EM Ethernet Repeater card angled view showing dual RJ-45 ports and fiber connectors on edge

    GNP Computers 1-501701EM PDSi 10/100 Ethernet Repeater Card PCB 1-501700 Rev C

    GNP Computers

    $35.00
    Was: $70.00
    GNP Computers 1-501701EM PDSi 10/100 Ethernet Repeater Card PCB 1-501700 Rev CThis is a 10/100 Ethernet repeater network card designed for industrial and telecom applications. The card functions as a...
    28316
    SKU:
    28316
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    GNP
    Model:
    1-501701EM
    MPN:
    1-501701EM
    Secondary Model:
    1-501700
    Type:
    10/100 Ethernet Repeater Network Card
    PCB Number:
    1-501700
    Hardware Revision:
    Rev C
    Product Line:
    PDSi
    Network Standard:
    10/100 Ethernet (10BASE-T / 100BASE-TX)
    Form Factor:
    PCB / Card Module
    Country/Region of Manufacture:
    United States
    Interface Type:
    10/100 Ethernet
    Connector Type:
    RJ-45
    Condition:
    Used – Inspected
    SKU:
    28316
    Seller Notes:
    Card only; no additional accessories included.
    Condition Notes:
    GNP Computers 1-501701EM PDSi 10/100 Ethernet Repeater Card. Inspected and in good condition. Board shows normal light wear; components and connectors appear intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • GNP Computers MNS Alarm Power Module 1-500186 PCB with large black heatsink – angled front view GNP Computers MNS Alarm Power Module 1-500186 PCB – top-down view showing GNP Computers label and component layout

    GNP Computers 1-500186 MNS Alarm Power Module Rev E PDSi 1-501360DM

    GNP Computers

    $60.00
    Was: $125.00
    GNP Computers 1-500186 MNS Alarm Power Module Rev E PDSi 1-501360DMAlarm power supply board for GNP Computers PDSi MNS telecommunications and industrial monitoring systems. This PCB module manages...
    25589
    SKU:
    25589
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    GNP
    Model:
    1-500186
    MPN:
    1-500186
    Secondary Model:
    1-501360DM
    Type:
    Alarm Power Module PCB
    SKU:
    25589
    Hardware Revision:
    Rev E
    Condition:
    Used – Inspected
    Seller Notes:
    Board only; no additional accessories included.
    Form Factor:
    PCB / Board Module
    Compatible With:
    GNP Computers PDSi MNS systems
    Condition Notes:
    GNP Computers 1-500186 MNS Alarm Power Module inspected and in good used condition. PCB shows normal wear; heatsink intact, connectors undamaged. Kit P/N 1-501360DM. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • GNP Computers 1-503582 RJ21/RJ45 Entry Panel Rev A — front view showing 4 RJ45 trunk ports labeled Trunk 0/2 through Trunk 5/7 and GNP logo GNP Computers 1-503582 RJ21/RJ45 Entry Panel Rev A — rear view showing Telco 50-pin RJ21 connector and PCB label

    GNP Computers RJ21/RJ45 Entry Panel 1-503582 Rev A 4-Port RJ45 Telco PCB

    GNP Computers

    $25.00
    Was: $50.00
    GNP Computers RJ21/RJ45 Entry Panel 1-503582 Rev A 4-Port RJ45 Telco PCBThis is a telecom entry panel PCB that converts RJ21 (Telco 50-pin) connections to four RJ45 trunk ports. It was used in...
    24672
    SKU:
    24672
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    5.00 LBS
    Brand:
    GNP
    Model:
    1-503582
    MPN:
    1-503582
    Secondary Model:
    GNPO1990375C
    Type:
    RJ21/RJ45 Entry Panel PCB
    PCB Revision:
    Rev A
    SKU:
    24672
    Connector Type 1:
    RJ21 (Telco 50-pin) — rear
    Connector Type 2:
    RJ45 — 4x front-facing trunk ports
    Number of Ports:
    4 x RJ45
    Port Labels:
    Trunk 0/2, Trunk 1/3, Trunk 4/6, Trunk 5/7
    Interface Type:
    RJ21 to RJ45
    Form Factor:
    PCB / Card Module
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    PCB only; no cables or mounting hardware included.
    Condition Notes:
    GNP Computers 1-503582 RJ21/RJ45 Entry Panel Rev A. Inspected and in good used condition. PCB is clean; all RJ45 and RJ21 connectors intact. Light wear from prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • GNP Computers Soft-Switch Control Board 1-501146 Rev D – full board top view showing RJ connector, DIP IC, and wire harness GNP Computers Soft-Switch Control Board PCB close-up showing silkscreen label with PCB number 1-501146 Rev D 970724 and main DIP IC

    GNP Computers Soft-Switch Control Board PCB 1-501146 Rev D SMTK98467124B

    GNP Computers

    $35.00
    Was: $70.00
    GNP Computers Soft-Switch Control Board PCB 1-501146 Rev D SMTK98467124BThe GNP Computers Soft-Switch Control Board is a compact PCB designed to handle soft-switching control logic within GNP...
    24669
    SKU:
    24669
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    GNP
    Model:
    SMTK98467124B
    MPN:
    1-501146
    Secondary Model:
    1-501147FR
    Type:
    Soft-Switch Control Board (PCB)
    SKU:
    24669
    Revision:
    Rev D
    Date Code:
    970724
    Country/Region of Manufacture:
    United States
    Form Factor:
    PCB / Card Module
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Board only; includes attached wire harness connector as shown in photos.
    Condition Notes:
    GNP Computers Soft-Switch Control Board 1-501146 Rev D inspected and in good condition. Board is clean, no visible damage. DIP IC and components intact. Wire harness connector present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • GNP Computers 1-501146 Soft-Switch Control Board PCB Rev D – front component side showing status LED, power LED, CPU temp sensor labels, and edge connector GNP Computers Soft-Switch Control Board 1-501146 Rev D 970724 – close-up of PCB label showing Made in USA marking and GNP Computers branding

    GNP Computers 1-501146 Soft-Switch Control Board PCB Rev D SMTK984671Q8D

    GNP Computers

    $65.00
    Was: $125.00
    GNP Computers 1-501146 Soft-Switch Control Board PCB Rev D SMTK984671Q8DA used soft-switch control board PCB from GNP Computers designed for telecommunications and industrial switching applications...
    24667
    SKU:
    24667
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    GNP
    Model:
    1-501146
    MPN:
    SMTK984671Q8D
    Secondary Model:
    1-501147FR
    SKU:
    24667
    Type:
    Soft-Switch Control Board (PCB)
    Revision:
    Rev D
    Date Code:
    970724
    Country/Region of Manufacture:
    United States
    Form Factor:
    PCB / Card
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Board only; no additional accessories included.
    Condition Notes:
    GNP Computers 1-501146 Soft-Switch Control Board SMTK984671Q8D. Inspected and in good condition. Normal handling wear; no visible damage or missing components.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • GNP Computers uP860 Core PCB 1-501358 Rev F dated 25 Jan 2000 — top-side view showing board layout, edge connectors, and ICs GNP Computers uP860 Core board reverse side — Lattice ispLSI 2096 125LQ FPGA and memory ICs visible

    GNP Computers uP860 Core Processor Board PCB 1-501358 Rev F VME SBC Module

    GNP Computers

    $75.00
    Was: $150.00
    GNP Computers uP860 Core Processor Board PCB 1-501358 Rev F VME SBC ModuleThe GNP Computers uP860 Core is a single-board computer (SBC) processor module built around GNP's uP860 architecture...
    24666
    SKU:
    24666
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    GNP
    Model:
    uP860 Core
    MPN:
    1-501358
    Secondary Model:
    PCB# 1-501358
    Type:
    Single-Board Computer (SBC) Processor Module
    SKU:
    24666
    PCB Revision:
    Rev F
    PCB Date Code:
    25 Jan 2000
    Main Controller / FPGA:
    Lattice ispLSI 2096 125LQ A821B01
    Form Factor:
    PCB Module / Card
    Condition:
    Used – Inspected
    Seller Notes:
    Board only; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Compatible With:
    GNP Computers uP860 systems and compatible VME/embedded platforms
    Condition Notes:
    GNP Computers uP860 Core PCB 1-501358 inspected and in good used condition. Edge connectors clean and intact. Light wear consistent with prior service use. No visible damage. Board only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • GNP Computers PDSI Demarc Champ50 RJ45 PCB 1-501523 — front side showing 20 RJ45 ports in two rows labeled Transmit CHAMP and Receive CHAMP GNP Computers PDSI Demarc Champ50 RJ45 PCB 1-501523 Rev C — rear side showing two Champ50 connectors and GNP Computers Made in USA label

    GNP Computers PDSI Demarc Champ50 to RJ45 PCB 1-501523 Rev C Telco Breakout

    GNP Computers

    $35.00
    Was: $70.00
    GNP Computers PDSI Demarc Champ50 to RJ45 PCB 1-501523 Rev C Telco BreakoutThis is a demarc breakout board that converts Champ50 (SCSI-2 style) connectors to RJ45 ports. The PCB provides interface...
    24665
    SKU:
    24665
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    GNP
    Model:
    PDSI Demarc Champ50
    MPN:
    1-501523
    Secondary Model:
    1-501524B1
    PCB Number:
    1-501523
    Revision:
    Rev C
    Date Code:
    990319
    Type:
    Demarc Breakout Board / Champ50 to RJ45 Adapter PCB
    Interface Type:
    Champ50 (SCSI-2 style) to RJ45
    Connector Type:
    Dual Champ50 (rear), 20x RJ45 (front)
    Number of Ports:
    20 RJ45 ports (10 Transmit, 10 Receive)
    Form Factor:
    PCB / Card
    Country/Region of Manufacture:
    United States
    Compatible With:
    PDSI DSL/T1 demarc systems using Champ50 interface
    SKU:
    24665
    Condition:
    Used – Inspected
    Seller Notes:
    Includes PCB 1-501523 Rev C; companion board 1-501524B1 referenced
    Condition Notes:
    GNP Computers PDSI Demarc Champ50 RJ45 PCB 1-501523 Rev C. Inspected, in good condition. All 20 RJ45 ports and dual Champ50 connectors intact. Light handling wear. No visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • GNP Computers 1-501842 Rev A Demarc BNC Connector PCB Board — front view showing full array of BNC connectors arranged in transmitter and receiver rows GNP Computers 1-501842 Rev A Demarc BNC PCB — rear/solder side showing three black component modules and SMD components

    GNP Computers 1-501842 Rev A Demarc BNC Connector PCB Board 980619

    GNP Computers

    $65.00
    Was: $125.00
    GNP Computers 1-501842 Rev A Demarc BNC Connector PCB Board 980619The GNP Computers 1-501842 is a demarc (demarcation) BNC connector PCB board, Revision A, with a date code of 980619 (June 1998). The...
    24664
    SKU:
    24664
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    GNP
    Model:
    1-501842
    MPN:
    1-501842
    Type:
    Demarc BNC Connector PCB Board
    SKU:
    24664
    Revision:
    Rev A
    Date Code:
    980619
    Connector Type:
    BNC
    Board Function:
    Transmitter / Receiver Demarc
    Form Factor:
    PCB / Card Module
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Board only; no cables or additional accessories included.
    Condition Notes:
    GNP Computers 1-501842 Rev A Demarc BNC PCB Board. Inspected and in good condition. Clean board, no broken connectors or visible damage. Normal handling marks from prior use. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • GNP Computers 1-503153C1 cPCI RTM Wide SCSI I/O Rear Transition Module – front face showing SCSI-OUT and SCSI-IN 68-pin HD connectors and aluminum card handle brackets GNP Computers 1-503153C1 cPCI RTM Wide SCSI I/O Module – rear PCB side showing two 68-pin cPCI backplane connectors (P3/P5) and two ribbon-style header connectors

    GNP Computers 1-503153C1 cPCI RTM Wide SCSI I/O Rear Transition Module 6U

    GNP Computers

    $45.00
    Was: $90.00
    GNP Computers 1-503153C1 cPCI RTM Wide SCSI I/O Rear Transition Module 6UThe GNP Computers 1-503153C1 is a 6U CompactPCI (cPCI) Rear Transition Module (RTM) providing Wide SCSI I/O connectivity for...
    24218
    SKU:
    24218
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    GNP
    Model:
    1-503153C1
    MPN:
    1-503153C1
    Secondary Model:
    1-503737AT
    PCB Assembly Number:
    PCB# 1-503153C1 Rev X1
    Type:
    cPCI Rear Transition Module (RTM), Wide SCSI I/O
    SKU:
    24218
    Form Factor:
    6U CompactPCI (cPCI)
    Bus Interface:
    CompactPCI (cPCI) Standard Bus
    Connector Interface:
    P3 and P5 cPCI Backplane Connectors
    SCSI Type:
    Wide SCSI
    SCSI Ports:
    SCSI-OUT and SCSI-IN (2x 68-pin HD connectors)
    Hardware Revision:
    Rev X1
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Board only; no cables included. Inspected and in good condition.
    Compatible With:
    GNP Computers PDSi cPCI systems, 6U CompactPCI chassis
    Condition Notes:
    GNP Computers 1-503153C1 cPCI RTM Wide SCSI I/O Module. Inspected and in good condition. PCB, SCSI connectors, and backplane connectors appear intact and undamaged. Normal light wear from prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00