Avantek

Avantek

  • Avantek ATM-18033 RF microwave assembly front-right view showing Avantek amplifier module, SMA connectors, and D-sub connector on brass chassis Avantek ATM-18033 RF microwave assembly left-side and rear view of brass chassis with mounted components and SMA port

    Avantek ATM-18033 12-18 GHz RF Microwave System Narda S213D Teledyne CS33SIC-T

    Avantek

    $550.00
    Was: $1,100.00
    Avantek ATM-18033 12-18 GHz RF Microwave System Narda S213D Teledyne CS33SIC-TWideband RF microwave assembly operating in the Ku-Band frequency range of 12 to 18 GHz. Complete chassis-mounted system...
    49561
    SKU:
    49561
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Avantek
    Model:
    ATM-18033
    Secondary Model:
    AMT-18033
    MPN:
    ATM-18033
    SKU:
    49561
    Type:
    Microwave RF Assembly / Wideband Signal Amplifier System
    Frequency Range:
    12 to 18 GHz
    Frequency Band:
    Ku-Band
    Component 1:
    Avantek ATM-18033 Wideband Small Signal Amplifier 12-18 GHz
    Component 2:
    VMC Vectronics Microwave Corp DAD1114-80 Digital Attenuator
    Component 3:
    Narda S213D SPST Switch
    Component 4:
    Narda 4316-2 2-Way Power Divider
    Component 5:
    Teledyne Microwave CS33SIC-T Module 24-30 VDC (Qty 2)
    Component 6:
    Varian VSR 9050BTA
    Component 7:
    Microwave Associates 8R45F Module
    Component 8:
    ARRA Attenuator
    Power Requirements:
    24-30 VDC (Teledyne CS33SIC-T modules)
    Connector Type:
    SMA (gold-plated), D-Sub
    Form Factor:
    Chassis / Board Assembly
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Complete multi-component RF microwave assembly on chassis; all sub-modules included as listed.
    Condition Notes:
    Avantek ATM-18033 12-18 GHz RF microwave assembly inspected and in good used condition. Pulled from a working environment where it was in use and functional. All listed sub-components present on chassis.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $550.00
    Was: $1,100.00
  • Avantek ATM-18033 RF microwave amplifier assembly — three-quarter front view showing Avantek amplifier module, Narda SPST switch, SMA connectors, and D-Sub interface connector on aluminum chassis Avantek ATM-18033 RF microwave assembly — right side and rear view showing flat aluminum panel with part number label and Teledyne CS33SIC-T module visible at lower left

    Avantek ATM-18033 12-18 GHz Wideband Amplifier RF Microwave Assembly w/ Narda

    Avantek

    $550.00
    Was: $1,100.00
    Avantek ATM-18033 12-18 GHz Wideband Amplifier RF Microwave Assembly w/ Narda S213DThis is a multi-component RF and microwave signal assembly built around an Avantek ATM-18033 wideband small signal...
    49560
    SKU:
    49560
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Avantek
    Model:
    ATM-18033
    MPN:
    ATM-18033
    Type:
    RF Microwave Amplifier Assembly
    SKU:
    49560
    Frequency Range:
    12 to 18 GHz
    Amplifier Type:
    Wideband Small Signal Amplifier
    Frequency Band:
    Ku-Band
    Country/Region of Manufacture:
    United States
    Form Factor:
    Chassis/Module Assembly
    Included Component 1:
    Avantek ATM-18033 Wideband Amplifier 12-18 GHz (Qty 1)
    Included Component 2:
    VMC Vectronics DAD1114-80 Digital Attenuator (Qty 1)
    Included Component 3:
    Narda S213D SPST Switch 2-18 GHz (Qty 1)
    Included Component 4:
    Teledyne Microwave CS33SIC-T Module 24-30 VDC (Qty 2)
    Included Component 5:
    Varian VSR 9050BTA (Qty 1)
    Included Component 6:
    Microwave Associates 8R45F Module (Qty 1)
    Included Component 7:
    ARRA 9412-6 Attenuator (Qty 1)
    Included Component 8:
    ARRA 9412-10 Attenuator (Qty 1)
    Connector Type:
    SMA (coaxial), D-Sub
    Control Voltage:
    24-30 VDC (Teledyne modules)
    Narda Switch Model:
    S213D, 2-18 GHz SPST
    VMC Attenuator Model:
    DAD1114-80 Digital Attenuator
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Complete multi-component RF assembly; all sub-modules listed above are included as shown.
    Condition Notes:
    Avantek ATM-18033 12-18 GHz RF amplifier assembly inspected and in good used condition. Pulled from a working environment where it was actively in use and functional. All listed sub-components present. SMA and D-Sub connectors intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $550.00
    Was: $1,100.00
  • Avantek PS-110-004 satellite power supply front panel view showing Avantek logo, J1 DC output connector, power cord, and label with model and part number Avantek PS-110-004 satellite power supply top and rear view showing gray metal enclosure with mounting flange and attached cable

    Avantek PS-110-004 Satellite Power Supply 310-037769-001 Rev B 120VAC

    Avantek

    $300.00
    Was: $600.00
    Avantek PS-110-004 Satellite Power Supply 310-037769-001 Rev B 120VACThis is a DC power supply designed for Avantek satellite ground station equipment. It converts 120V AC input to regulated DC...
    36036
    SKU:
    36036
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Avantek
    Model:
    PS-110-004
    MPN:
    310-037769-001
    Secondary Model:
    310-037769-001 Rev B
    SKU:
    36036
    Type:
    Satellite Power Supply
    Input Voltage:
    120V AC
    Fuse Rating:
    2A
    Output Type:
    DC
    Revision:
    Rev B
    AC Input Connector:
    Circular military-style (3-pin)
    DC Output Connector:
    J1 — circular multi-pin
    Included Accessories:
    Power cord with circular 3-pin connector
    Condition:
    Used – Inspected
    Form Factor:
    Benchtop / Panel-Mount
    Compatible With:
    Avantek satellite ground station equipment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Includes power cord with circular 3-pin connector. Inspected and in good condition.
    Condition Notes:
    Avantek PS-110-004 satellite power supply, P/N 310-037769-001 Rev B. Inspected and in good used condition. Light surface wear; connectors and fuse intact. Includes power cord.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $300.00
    Was: $600.00
  • Avantek UTA-9665 RF amplifier module – angled top view showing blue label with model and frequency range Avantek UTA-9665 broadband RF amplifier – opposite angled view showing SMA output connector and IN label

    Avantek UTA-9665 RF Amplifier 10-500MHz 11dB Gain SMA Broadband Module

    Avantek

    $28.00
    Was: $60.00
    Avantek UTA-9665 RF Amplifier 10-500MHz 11dB Gain SMA Broadband ModuleThe Avantek UTA-9665 is a compact connectorized broadband RF amplifier module covering 10 to 500 MHz, delivering 11 dB of gain at...
    33429
    SKU:
    33429
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Avantek
    Model:
    UTA-9665
    MPN:
    UTA-9665
    Type:
    Broadband RF Amplifier Module
    SKU:
    33429
    Frequency Range:
    10–500 MHz
    Gain:
    11 dB at 500 MHz
    Connector Type:
    SMA (female)
    Form Factor:
    Connectorized Module / Bench / Inline
    Patent Number:
    3493882
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Unit only. Tested and confirmed working.
    Condition Notes:
    Avantek UTA-9665 RF amplifier, 10–500 MHz. Tested and confirmed working; 11 dB gain verified at 500 MHz. Light scuffing on housing, label shows fading. SMA connectors intact. Good working condition.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00
  • Avantek PS-110-004 outdoor power supply front-left view showing AVANTEK logo, circular AC input and DC output connectors on face panel, mounted on gold-anodized baseplate Avantek PS-110-004 outdoor power supply rear-right view showing sealed gray metal enclosure and gold-anodized aluminum baseplate with mounting hardware

    Avantek PS-110-004 120VAC DC Output Outdoor Enclosure Power Supply Satcom

    Avantek

    $300.00
    Was: $600.00
    Avantek PS-110-004 120VAC DC Output Outdoor Enclosure Power Supply SatcomThe Avantek PS-110-004 is a ruggedized outdoor-rated power supply that converts 120V AC mains power to a regulated DC output,...
    32001
    SKU:
    32001
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    25.00 LBS
    Brand:
    Avantek
    Model:
    PS-110-004
    MPN:
    PS-110-004
    SKU:
    32001
    Type:
    Outdoor Enclosure DC Power Supply
    Input Voltage:
    120V AC
    Output Type:
    DC (multi-pin circular connector, J1)
    AC Input Connector:
    Circular mil-spec connector (P1, A.C. Input)
    DC Output Connector:
    Circular mil-spec connector (J1, D.C. Output)
    Fuse Rating:
    2A
    Enclosure Type:
    Sealed metal outdoor enclosure
    Mounting:
    Baseplate / surface mount
    Application:
    Satellite communications (Satcom) ground equipment
    Condition:
    Used – Inspected
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Avantek PS-110-004 outdoor DC power supply. Inspected and in good used condition. Enclosure and baseplate show typical field wear; both circular mil-spec connectors intact. Not powered or tested at our facility.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $300.00
    Was: $600.00
  • Avantek ASAT-1214-1004 RF Amplifier — front-left view showing Avantek logo, SMA coax ports J1–J3, P1 power connector, and aluminum enclosure with finned heat sink Avantek ASAT-1214-1004 RF Amplifier — rear view showing WR75 waveguide INPUT and OUTPUT ports and small indicator window

    Avantek ASAT-1214-1004 4W RF Amplifier 70MHz WR75 Waveguide 305-037808-104

    Avantek

    $400.00
    Was: $800.00
    Avantek ASAT-1214-1004 4W RF Amplifier 70MHz WR75 Waveguide 305-037808-104The Avantek ASAT-1214-1004 is a 4-watt RF amplifier module housed in a sealed, finned aluminum enclosure designed for use in...
    32000
    SKU:
    32000
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    25.00 LBS
    Brand:
    Avantek
    Model:
    ASAT-1214-1004
    MPN:
    305-037808-104
    Secondary Model:
    305-037808-104
    SKU:
    32000
    Type:
    RF Amplifier
    Output Power:
    4 Watts
    IF Frequency:
    70 MHz
    Waveguide Port Size:
    WR75
    Waveguide Ports:
    INPUT and OUTPUT (WR75, rear panel)
    IF Coax Ports:
    J1: 70MHz Output Monitor; J2: 70MHz Out; J3: 70MHz In
    IF Connector Type:
    SMA (J1, J2, J3)
    ALC:
    Yes — ALC ADJ trimmer on front panel
    Power Connector:
    P1 Power connector (front panel)
    Required Power Supply:
    PS110-004 or P/N 310-037769-001 or 310-037769-002
    Form Factor:
    Enclosed RF Package / Benchtop
    Enclosure Material:
    Aluminum alloy, finned heat sink sides
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only — power supply (PS110-004) not included
    Application:
    Satellite uplink/downlink IF amplification, microwave RF systems
    Condition Notes:
    Used condition, pulled from service. Aluminum enclosure shows wear; SMA ports and power connector intact. Rear WR75 input flange has oxidation. Requires separate power supply (not included).
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $400.00
    Was: $800.00
  • Avantek PS-110-002 power supply front panel showing DC Output connector J1, 2A fuse, and P1 115VAC input connector with label Avantek PS-110-002 outdoor enclosure power supply — top and rear view of aluminum housing with bolt-flange mounting base

    Avantek PS-110-002 115VAC Input DC Output Power Supply Outdoor Enclosure Satcom

    Avantek

    $500.00
    Was: $1,000.00
    Avantek PS-110-002 115VAC Input DC Output Power Supply Outdoor Enclosure SatcomAC to DC power supply housed in a weatherproof aluminum enclosure. Converts 115V AC input to DC output for satcom and RF...
    31998
    SKU:
    31998
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    18.00 LBS
    Brand:
    Avantek
    Model:
    PS-110-002
    MPN:
    PS-110-002
    Type:
    AC to DC Power Supply, Outdoor Enclosure
    SKU:
    31998
    Input Voltage:
    115V AC
    Input Connector:
    P1 — 3-pin circular military-style connector
    Output Type:
    DC
    Output Connector:
    J1 — multi-pin circular connector (DC Output)
    Fuse Rating:
    2A
    Enclosure Type:
    Outdoor / Weatherproof Aluminum Enclosure
    Form Factor:
    Standalone / Chassis Mount
    Power Requirements:
    115V AC Input
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Unit only; no cables or accessories included.
    Compatible With:
    Avantek RF/Satcom amplifier systems
    Condition Notes:
    Avantek PS-110-002 115VAC DC Power Supply inspected and in good used condition. Outdoor aluminum enclosure shows minor surface scuffing and light soiling. Front-panel connectors and 2A fuse holder present and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $500.00
    Was: $1,000.00
  • Avantek 310-037769-001C 120V AC to DC power supply in outdoor enclosure — front and side view showing J1 DC output, Fuse 2A, and PI AC input connectors Avantek 310-037769-001C outdoor power supply enclosure — top and side view showing gray aluminum housing with mounting flange and bolt pattern

    Avantek 310-037769-001C 120V AC to DC Power Supply Outdoor Enclosure Satcom

    Avantek

    $500.00
    Was: $1,000.00
    Avantek 310-037769-001C 120V AC to DC Power Supply Outdoor Enclosure SatcomThe Avantek 310-037769-001C is a 120V AC-input DC-output power supply housed in a rugged outdoor-rated metal enclosure...
    31997
    SKU:
    31997
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    18.00 LBS
    Brand:
    Avantek
    Model:
    310-037769-001C
    MPN:
    310-037769-001C
    Type:
    AC to DC Power Supply
    SKU:
    31997
    Input Voltage:
    120V AC
    Output Type:
    DC
    Fuse Rating:
    2A
    DC Output Connector:
    J1 Multi-Pin (circular)
    AC Input Connector:
    PI 3-pin circular connector
    Enclosure Type:
    Outdoor / Weatherproof Enclosure
    Form Factor:
    Outdoor Enclosed / Standalone
    Application:
    Satellite Communications (Satcom) Ground Equipment
    Seller Notes:
    Unit only; no additional accessories included.
    Condition:
    Used – Inspected, appears in good condition
    Condition Notes:
    Avantek 310-037769-001C 120V AC/DC Outdoor Power Supply. Inspected, appears in good used condition. Enclosure solid; J1 DC output, PI AC input, and 2A fuse all appear intact. No obvious damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $500.00
    Was: $1,000.00
  • Avantek ASAT-1214-002 2W 70MHz RF Amplifier – front and right-side view showing Avantek branding label and connector panel Avantek ASAT-1214-002 RF Amplifier – top and left-side view showing sealed aluminum enclosure with bolt-down cover

    Avantek ASAT-1214-002 2W 70MHz RF Amplifier 305-037808-002 WR75 Satcom

    Avantek

    $250.00
    Was: $500.00
    Avantek ASAT-1214-002 2W 70MHz RF Amplifier 305-037808-002 WR75 SatcomThe Avantek ASAT-1214-002 is a 2-Watt, 70 MHz RF amplifier housed in a rugged sealed aluminum chassis. It was designed for...
    31884
    SKU:
    31884
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    26.00 LBS
    Brand:
    Avantek
    Model:
    ASAT-1214-002
    MPN:
    305-037808-002
    Type:
    RF Amplifier
    SKU:
    31884
    Output Power:
    2 Watts
    Frequency:
    70 MHz
    Input Connector:
    WR75 Waveguide
    Output Connector:
    WR75 Waveguide
    Output Monitor Port:
    J1 – 70MHz Output Monitor
    RF Output Port:
    J2 – 70MHz Out
    RF Adjust Port:
    J3 – 70MHz Out Adj
    Power/Control Connector:
    Circular multi-pin (rear panel)
    Enclosure:
    Sealed aluminum chassis with screw-torque covers
    Country/Region of Manufacture:
    United States
    Application:
    Satellite communications (Satcom) ground station
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only; no cables or documentation included.
    Condition Notes:
    Avantek ASAT-1214-002 2W 70MHz RF Amplifier. Inspected, good used condition. Enclosure shows surface scuffing/minor soiling. Connectors appear intact; WR75 waveguide port present with cover. Not powered or tested at our facility.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $250.00
    Was: $500.00