Description
SMC CDQ2WB25-10D Compact Pneumatic Cylinder 25mm Bore 10mm Stroke XB6 Switch
The SMC CDQ2WB25-10D is a compact double-acting pneumatic cylinder from SMC Corporation's CDQ2 series, featuring a 25mm bore and 10mm stroke. This unit includes an XB6 series auto switch with a 4-pin industrial connector cable, providing integrated position sensing for use in automated systems. The cylinder is rated to 10 bar operating pressure and carries an IP-DE environmental designation, making it suitable for light-duty industrial automation environments.
Specifications & What's Included
- Brand: SMC Corporation
- Model: CDQ2WB25-10D
- Option Code: XB6*N-26
- Series: CDQ2 Compact Cylinder
- Bore Diameter: 25 mm
- Stroke: 10 mm
- Maximum Operating Pressure: 10 bar
- Operating Temperature Range: -10°C to +60°C
- Pneumatic Ports: Two push-in fittings (labeled L10 and L11), top-mounted
- Auto Switch: XB6 series, integrated on body
- Connector: 4-pin rectangular industrial connector, rated 10A / 250V
- IP Rating: IP-DE
- Unit marking: INCH
- Includes: Cylinder body with attached auto switch assembly and 4-pin connector cable
Applications
The SMC CDQ2 series is one of the most widely used compact pneumatic cylinder families in industrial automation. These cylinders are designed for space-constrained applications where a short-stroke linear actuator is needed — common in pick-and-place machinery, clamping fixtures, indexing mechanisms, and semiconductor and electronics assembly equipment. The CDQ2WB profile (wide body) provides a larger mounting footprint and greater resistance to lateral loading compared to the standard CDQ2 body. The XB6 auto switch option adds reed or solid-state position sensing directly on the cylinder body, allowing a PLC or motion controller to detect end-of-stroke positions without separate proximity sensors. SMC cylinders of this type are standard components across general factory automation, food and beverage, and clean-room-compatible assembly systems worldwide.
This SMC CDQ2WB25-10D compact pneumatic cylinder has been inspected and appears to be in good condition. It was pulled from a working environment where it was in use and functional. The aluminum body shows light surface wear consistent with industrial use, and the blue push-in fittings and black knob are intact. The attached 4-pin connector cable and auto switch assembly are present. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
SMC |
Model: |
CDQ2WB25-10D |
MPN: |
CDQ2WB25-10D |
Secondary Model: |
XB6*N-26 |
SKU: |
45578 |
Type: |
Compact Pneumatic Cylinder |
Series: |
CDQ2 Compact Cylinder Series |
Bore Size: |
25 mm |
Stroke: |
10 mm |
Auto Switch / Sensor: |
XB6 Series Auto Switch |
Switch Connector: |
4-pin rectangular industrial connector |
Connector Rating: |
10A, 250V |
Port Labels: |
L10, L11 (push-in pneumatic fittings, top) |
IP Rating: |
IP-DE |
Seller Notes: |
Includes attached 4-pin connector cable and auto switch assembly |
Country/Region of Manufacture: |
Japan |
Application: |
Industrial automation, pneumatic actuation |
Form Factor: |
Compact / Inline |
Condition Notes: |
SMC CDQ2WB25-10D compact pneumatic cylinder. Inspected and in good condition; pulled from a working environment where it was in use and functional. Includes 4-pin connector cable and auto switch. Normal wear. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
