MTS

MTS INT-M-2-1280 Level Plus Analog Level & Temp Transmitter 70in RTD IS

(No reviews yet) Write a Review
SKU:
44479
MPN:
Level Plus INT-M-2-1280 1710700101072
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
7.00 LBS
Shipping:
Calculated at Checkout
  • MTS INT-M-2-1280 Level Plus analog level and temperature transmitter — full length view showing 70-inch stainless steel rod against wall
  • MTS Level Plus INT-M-2-1280 model label showing model number 1710700101072, serial number, date code 7/93E, rod length 70in, gradient 9.02005 µs/in, RTD location data
  • MTS INT-M-2-1280 label showing Factory Mutual System Approved intrinsically safe rating — Class I Div 1 Groups C D, Class II Div 1 Groups E F G, Class III Div 1, drawing number 650029
  • MTS INT-M-2-1280 Level Plus transmitter head close-up showing blue housing and label with stainless rod extending below
  • MTS Level Plus transmitter head top detail showing threaded conduit entry port on blue cast housing
  • MTS INT-M-2-1280 sanitary tri-clamp mounting connection detail showing stainless clamp and O-ring seal between blue head and rod
  • MTS INT-M-2-1280 transmitter interior wiring compartment showing multi-pin connector with red and black leads
  • MTS Level Plus transmitter stainless steel float assembly and lower rod end with wire bail retainer loop visible
  • MTS INT-M-2-1280 lower rod showing cotter pin retainer installed through stainless steel shaft
$400.00
Was: $800.00
Current Stock: 1

Sold Out

Description

MTS INT-M-2-1280 Level Plus Analog Level & Temp Transmitter 70in RTD IS

Magnetostrictive level and temperature transmitter for tank measurement applications. Delivers analog output for continuous monitoring of liquid level and temperature in sanitary or process environments.

Specifications & What's Included

  • Rod length: 70 inches, stainless steel construction
  • RTD temperature sensor (T3C code) located 1.5 inches from rod tip
  • Intrinsically Safe, FM-approved for Class I Div 1 Groups C,D; Class II Div 1 Groups E,F,G; Class III Div 1
  • Sanitary tri-clamp style mounting
  • Includes float assembly, sanitary clamp, and cotter pin retainer
  • Manufactured United States, date code 7/93E

Applications

Level Plus transmitters monitor tank levels and process temperatures in sanitary systems, chemical processing, and hazardous locations requiring FM-certified intrinsically safe equipment. Commonly used in pharmaceutical, food and beverage, and petrochemical industries where analog 4-20mA output integrates with PLC and SCADA control systems.

Condition: Used
This MTS Level Plus INT-M-2-1280 analog level and temperature transmitter has been inspected and is in good condition. The blue housing shows light surface wear and minor scuffing consistent with prior use, but there is no cracking, significant corrosion, or damage. The stainless steel rod is straight and intact with no visible bending. The sanitary tri-clamp mounting connection and O-ring seal appear complete. The internal wiring compartment is clean with the multi-pin connector and leads present. The float assembly and cotter pin retainer are included. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
MTS Systems
Model:
INT-M-2-1280
MPN:
1710700101072
Secondary Model:
Level Plus
Type:
Analog Level & Temperature Transmitter
SKU:
44479
Seller Notes:
Includes float assembly, sanitary mounting clamp, and cotter pin retainer
Country/Region of Manufacture:
United States
Rod Length:
70 in
Temperature Sensor:
RTD (Resistive Temperature Detector) — built-in
RTD Location:
1.5 in from tip; 68.5 in from flange
Gradient:
9.02005 µs/in
Temperature Code:
T3C
Date Code:
7/93E
Hazardous Location Rating:
Intrinsically Safe — FM Approved
Hazardous Location Class:
Class I Div 1 Groups C,D; Class II Div 1 Groups E,F,G; Class III Div 1
FM Drawing Number:
650029
Mounting Type:
Sanitary (tri-clamp style)
Rod Material:
Stainless Steel
Measurement Type:
Magnetostrictive Level & Temperature
Output Type:
Analog
Application:
Tank level and temperature measurement, sanitary/process
Certifications:
Factory Mutual (FM) Approved
Condition:
Used – Inspected and in Good Condition
Condition Notes:
MTS Level Plus INT-M-2-1280 analog level & temp transmitter. Inspected and in good condition. Blue housing shows light surface wear. Stainless rod is straight. Float assembly, sanitary clamp, and cotter pin retainer included.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

MTS Level Plus A910750172 analog level temperature transmitter full-length view with 75-inch stainless steel rod mounted against wall MTS Level Plus A910750172 label showing model number, serial number, date code 09-93K, rod length 75 in, gradient 9.21250 µS/in, and RTD location
Add to Cart
Quick view

MTS Level Plus A910750172 Analog Level Temp Transmitter 75in RTD NEMA 4

MTS

$425.00
Was: $850.00
MTS Level Plus A910750172 Analog Level Temp Transmitter 75in RTD NEMA 4Magnetostrictive level and temperature transmitter with 75-inch stainless steel rod and integrated RTD sensor. Produces analog...
44516
SKU:
44516
Availability:
Usually ships within 1-2 business days.
Weight:
7.00 LBS
Brand:
MTS Systems
Model:
A910750172
MPN:
A910750172
Type:
Analog Level and Temperature Transmitter
SKU:
44516
Seller Notes:
Missing buoy and cotter pin. Electrical tape securing cord. Rod and transmitter head present.
Country/Region of Manufacture:
United States
Product Series:
Level Plus
Probe / Rod Length:
75 inches
Temperature Sensor Type:
Resistive Temperature Detector (RTD)
RTD Location:
8.0 in from tip / 67.0 in from flange
Gradient:
9.21250 µS/in
Temp Code:
T4
Enclosure Rating:
NEMA 4
Intrinsically Safe:
Yes — Factory Mutual Approved
Hazardous Location Rating:
Class I DIV 1 Groups C,D; Class II DIV 1 Groups E,F,G; Class III DIV 1
V max:
36.1V
I max:
118 mA
Ci:
0 nF
Li:
500 µH
Approval / Certification:
Factory Mutual (FM) Approved — Drawing 650508
Rod / Probe Material:
Stainless Steel
Mounting Connection:
Sanitary (hygienic) mounting connection
Operating Technology:
Magnetostrictive
Output Type:
Analog
Date Code:
09-93K
Serial Number (Internal):
51359-01-002
Condition:
Used – Inspected; missing buoy and cotter pin
Condition Notes:
MTS Level Plus A910750172 level/temp transmitter inspected, good used condition. Missing float buoy and cotter pin. Cable secured with electrical tape. Transmitter head, rod, and cable present. Normal wear from prior use.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
MTS Level Plus A910750172 analog level temperature transmitter with full 75-inch stainless steel probe, full unit view against white wall MTS Level Plus A910750172 label showing model number, serial number, date code 09/93, length 75in, gradient, and temp code T4
Add to Cart
Quick view

MTS Level Plus A910750172 Analog Level Temperature Transmitter RTD 75in Probe

MTS

$450.00
Was: $900.00
MTS Level Plus A910750172 Analog Level Temperature Transmitter RTD 75in ProbeThis is an analog level and temperature transmitter designed for industrial tank monitoring. It combines liquid level...
44476
SKU:
44476
Availability:
Usually ships within 1-2 business days.
Weight:
100.00 LBS
Brand:
MTS Systems
Model:
A910750172
MPN:
A910750172
Type:
Analog Level and Temperature Transmitter
SKU:
44476
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Includes attached teal multi-pin cable with circular connector
Country/Region of Manufacture:
United States
Probe Length:
75 inches
Temperature Sensor:
RTD (Resistive Temperature Detector), Temp Code T4
RTD Location:
8.0 [67.0]
Gradient:
9.20834 pS/in
Date Code:
09/93
Mounting Type:
Sanitary Mounting Connection
Rod Material:
Stainless Steel
Intrinsically Safe:
Yes
Safety Approval:
Factory Mutual (FM) System Approved
Hazardous Location Rating:
Class I Div 1, Groups C, D; Class II Div 1, Groups E, F, G; Class III Div 1
FM Drawing Number:
650508
Max Current (Ii):
118 mA
Capacitance (Ci):
0 nF
Inductance (Li):
500 µH
Output Type:
Analog
Application:
Liquid level and temperature measurement in industrial tanks
Compatible Tank Design:
70-series tank (per original description)
Connector Type:
Multi-pin circular connector (teal cable)
Form Factor:
Insertion / In-Tank Probe
Condition Notes:
MTS Level Plus A910750172 Analog Level and Temperature Transmitter. Inspected and in good condition. Blue housing shows normal wear. 75-inch SS probe intact. Teal cable and multi-pin connector included. Please contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
MTS A910410172 Level Plus RTD level sensor full unit view — teal housing, 41-inch stainless steel rod, teal cable with circular connector MTS Level Plus A910410172 label showing model number, serial number, date code 09/93, rod length 41 in., gradient 9.21875 µS/in, temp code T4, and RTD location 8.0
Add to Cart
Quick view

MTS A910410172 Level Plus RTD Magnetostrictive Level Sensor 41" Intrinsically

MTS

$425.00
Was: $850.00
MTS A910410172 Level Plus RTD Magnetostrictive Level Sensor 41" Intrinsically SafeMagnetostrictive level sensor with integrated RTD temperature measurement from MTS Systems Corporation. Designed for...
44350
SKU:
44350
Availability:
Usually ships within 1-2 business days.
Weight:
7.00 LBS
Brand:
MTS Systems
Model:
A910410172
MPN:
A910410172
SKU:
44350
Type:
Magnetostrictive Level Sensor with RTD
Sensor Technology:
Magnetostrictive
Product Series:
Level Plus Gauging Systems
Rod Length:
41 inches
Temperature Code:
T4
RTD Location:
8.0 [11.0]
Gradient:
9.21875 µS/in
Rod Material:
Stainless Steel
Mounting Connection:
Sanitary (Tri-Clamp style)
Float Included:
Yes
Intrinsically Safe:
Yes — Factory Mutual System Approved
Safety Rating:
Class I DIV 1 Grp C,D; Class II DIV 1 Grp E,F,G; Class III DIV 1
FM Drawing Number:
650508
Max Voltage (Vmax):
36.1V
Max Current (Imax):
118 mA
Capacitance (Ci):
0 pF
Inductance (Li):
500 µH
Connector Type:
Multi-pin circular connector (approx. 7-pin)
Date Code:
09/93
Manufacturer Division:
MTS Sensors Division
Country/Region of Manufacture:
United States
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes float and retention clip. Pulled from working service.
Condition Notes:
MTS A910410172 Level Plus RTD level sensor inspected and in good condition. Pulled from a working environment where it was in active use. Float, retention clip, and output connector all present. Normal wear on rod and housing.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
MTS Temposonics LT107501000 Analog Level Transmitter full length view showing teal housing and 75-inch stainless steel rod with float ball MTS Temposonics LT107501000 nameplate label showing FM intrinsically safe Class I Div 1 Group C/D approval, model number, serial number, date code 11-91, and 75-inch transducer stroke
Add to Cart
Quick view

MTS Temposonics LT107501000 Analog Level Transmitter 75" Stroke Intrinsically

MTS

$425.00
Was: $850.00
MTS Temposonics LT107501000 Analog Level Transmitter 75" Stroke Intrinsically SafeThe MTS Temposonics LT107501000 is a magnetostrictive analog continuous level transmitter with a 75-inch stainless...
44477
SKU:
44477
Availability:
Usually ships within 1-2 business days.
Weight:
100.00 LBS
Brand:
MTS Systems
Model:
LT107501000
MPN:
LT107501000
Product Family:
Temposonics
Type:
Analog Magnetostrictive Level Transmitter
SKU:
44477
Seller Notes:
Includes stainless steel float ball and retaining clip. No cable or junction box included.
Country/Region of Manufacture:
United States
Transducer Stroke:
75 inches
Rod Material:
Stainless Steel
Float Type:
Stainless Steel Ball Float
Mounting Type:
Sanitary / Hygienic
Hazardous Location Rating:
FM Approved Intrinsically Safe
Hazardous Location Class:
Class I, Division 1, Group C and D
Approval Standard:
DWGS 650027 or 650029
Output Type:
Analog
Sensing Technology:
Magnetostrictive
Date Code:
11-91
Application:
Continuous liquid level measurement in tanks
Condition:
Used – Inspected and in Good Condition
Condition Notes:
MTS Temposonics LT107501000 Level Transmitter inspected and in good used condition. Housing shows paint chips and scuffing. Stainless steel rod straight and clean. Float ball and retaining clip present. No cable or junction box included.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov