Description
MICOM Instamux 470LR Local Multiplexor 25-Pin Ports 115V 1A RS-232 Desktop
Local network multiplexor designed for serial data communication in industrial and telecom environments. Routes RS-232 signals across multiple 25-pin connections in the MICOM Instamux 470 series infrastructure.
Specifications & What's Included
- Model: Instamux 470LR
- Interface: RS-232, DB-25 (25-pin) connectors
- Power: 115V AC, 1A, 60Hz, single phase
- Fuse: 1 AMP 125V
- Form factor: Desktop unit
- Includes attached power cord
Applications
Local multiplexors of this type were deployed in telecom switching centers, industrial control networks, and data communication systems requiring serial port consolidation. The 470LR connects to compatible MICOM Instamux 470 series equipment and legacy RS-232 devices. Commonly used for managing multiple serial connections across distributed terminal and modem networks in pre-modern Ethernet environments.
Condition: For Parts or Not Working
This MICOM Instamux 470LR Local Multiplexor has been visually inspected and appears to be in good used condition overall. The beige desktop enclosure shows the kind of light surface scuffing and minor discoloration typical of vintage networking equipment that saw office use. The front panel label and branding are intact and legible. The rear 25-pin DB-25 port connectors appear intact with no obviously bent pins visible in the photos. The unit comes with its power cord attached. It has not been powered up or tested at our facility, but it was pulled from a working environment. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This MICOM Instamux 470LR Local Multiplexor has been visually inspected and appears to be in good used condition overall. The beige desktop enclosure shows the kind of light surface scuffing and minor discoloration typical of vintage networking equipment that saw office use. The front panel label and branding are intact and legible. The rear 25-pin DB-25 port connectors appear intact with no obviously bent pins visible in the photos. The unit comes with its power cord attached. It has not been powered up or tested at our facility, but it was pulled from a working environment. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
MICOM |
Model: |
Instamux 470LR |
MPN: |
478LR |
Type: |
Local Network Multiplexor |
SKU: |
14760 |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Unit only; power cord attached. No additional accessories observed. |
Country/Region of Manufacture: |
United States |
Form Factor: |
Desktop |
Power Requirements: |
115V AC, 1A, 60Hz, Single Phase |
Voltage: |
115V |
Amperage: |
1A |
Fuse: |
1 AMP 125V |
Phase: |
Single Phase (Ph 1) |
Frequency: |
60 Hz |
Interface Type: |
RS-232 (25-Pin D-Sub) |
Connector Type: |
DB-25 (25-Pin) |
Number of Ports: |
Multiple 25-pin RS-232 ports (see photos) |
Compatible With: |
MICOM Instamux 470 Series local network systems |
Condition Notes: |
MICOM Instamux 470LR Local Multiplexor in good used condition. Light cosmetic wear on enclosure. Rear 25-pin ports appear intact. Includes attached power cord. Not bench-tested at our facility; pulled from a working environment. |
