null
Servo

Japan Servo KP6M2-020 Unipolar Stepping Motor 1.8 Deg/Step DC 1.8V

(No reviews yet) Write a Review
SKU:
29557
MPN:
KP6M2-020
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Shipping:
Calculated at Checkout
  • Japan Servo KP6M2-020 stepping motor front view showing label, lead wires, and red and white connectors
  • Japan Servo KP6M2-020 stepping motor rear three-quarter view showing output shaft and square mounting flange
  • Close-up of KP6M2-020 motor lead wire connectors — red multi-pin and white G-1 housing
  • Side view of Japan Servo KP6M2-020 stepping motor body showing ground lug with yellow crimp terminal
  • Top-down view of Japan Servo KP6M2-020 output shaft and face-mount flange with mounting holes
  • Japan Servo KP6M2-020 rating plate label showing Type, DC 1.8V, 1.8 Deg/Step, serial number 1626, Japan Servo Co. Ltd. Tokyo Japan
$40.00
Was: $80.00
Current Stock: 1

Sold Out

Description

Japan Servo KP6M2-020 Unipolar Stepping Motor 1.8 Deg/Step DC 1.8V

Unipolar stepping motor manufactured by Japan Servo. This motor operates on 1.8V DC and rotates 1.8 degrees per step, providing controlled incremental positioning in industrial and telecom equipment.

Specifications & What's Included

  • Model: KP6M2-020
  • Type: Unipolar stepping motor
  • Voltage: DC 1.8V
  • Step angle: 1.8 degrees per step
  • Output shaft: Single flat-key shaft
  • Mounting: Square face-mount flange
  • Connectors: Red multi-pin and white G-1 connectors with attached lead wires
  • Country of manufacture: Japan

Applications

Unipolar stepping motors are commonly used in telecommunications switching equipment, industrial automation systems, and legacy printer mechanisms. These motors were standard in equipment requiring precise, repeatable positioning without feedback. The KP6M2-020 is compatible with telecom rack-mount systems and industrial control panels from the 1980s-2000s era that operated on low-voltage DC supplies.

Condition: Used
This Japan Servo KP6M2-020 unipolar stepping motor has been inspected and appears to be in good condition. The motor body is intact with no visible cracks or damage. The output shaft turns freely. The lead wires are present with both the red multi-pin connector and the white G-1 connector attached and intact. There is light surface wear on the mounting flange and motor housing consistent with previous use. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Japan Servo
Model:
KP6M2-020
MPN:
KP6M2-020
Type:
Unipolar Stepping Motor
SKU:
29557
Voltage Rating:
DC 1.8V
Step Angle:
1.8 Deg/Step
Motor Configuration:
Unipolar
Winding Type:
Unipolar
Connector Type:
Multi-pin housing connectors (red and white)
Output Shaft:
Single flat-key shaft
Mounting:
Square face-mount flange
Country/Region of Manufacture:
Japan
Seller Notes:
Includes attached lead wires with red multi-pin and white G-1 connectors
Condition:
Used – Inspected and in Good Condition
Condition Notes:
Japan Servo KP6M2-020 stepping motor inspected and in good condition. Output shaft turns freely. Lead wires present with red multi-pin and white G-1 connectors. Light surface wear on housing.
View AllClose

Related Products

Related Products

Sanyo Denki Step-Syn 103G770-3442 stepping motor – label side showing DC 3.9V 1.35A 1.8 Deg/Step rating plate Sanyo Denki 103G770-3442 stepper motor – shaft end showing toothed timing pulley output and flange mount holes
Add to Cart
Quick view

Sanyo Denki Step-Syn 103G770-3442 Stepping Motor DC 3.9V 1.35A 1.8 Deg/Step

$40.00
Was: $80.00
Sanyo Denki Step-Syn 103G770-3442 Stepping Motor DC 3.9V 1.35A 1.8 Deg/StepA two-phase stepper motor from Sanyo Denki's Step-Syn series designed for precision positioning applications. The motor...
42107
SKU:
42107
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Brand:
Sanyo Denki
Model:
103G770-3442
MPN:
103G770-3442
Type:
Stepping Motor (Stepper Motor)
SKU:
42107
Series:
Step-Syn
Voltage:
DC 3.9V
Current Rating:
1.35A
Step Angle:
1.8 Degrees/Step
Steps Per Revolution:
200
Connector Type:
4-Pin Connector
Number of Phases:
2
Shaft Type:
Toothed / Timing Pulley Output Shaft
Mounting:
Face/Flange Mount
Lot Number:
07813
Country/Region of Manufacture:
Japan
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Includes attached 4-pin connector lead. Inspected and in good condition.
Condition Notes:
Sanyo Denki Step-Syn 103G770-3442 Stepping Motor. Inspected and in good condition. Light wear to housing and outer wrap. 4-pin connector lead intact. No visible damage to shaft or flange.
TEC SPH-54AB-116 unipolar stepper motor – top view showing timing pulley on shaft, mounting bracket, and multi-color wire harness TEC SPH-54AB-116 stepping motor – side view showing cylindrical motor body, mounting bracket, and wire leads
Add to Cart
Quick view

TEC SPH-54AB-116 Unipolar Stepper Motor 2.1V 1.4 Ohm 1.8 Deg/Step Tokyo Electric

TEC

$11.10
Was: $25.00
TEC SPH-54AB-116 Unipolar Stepper Motor 2.1V 1.4 Ohm 1.8 Deg/Step Tokyo Electric Unipolar stepper motor manufactured by Tokyo Electric Co., Ltd. Delivers 200 steps per revolution with 1.8-degree step...
29555
SKU:
29555
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Brand:
TEC (Tokyo Electric Co., Ltd.)
Model:
SPH-54AB-116
MPN:
SPH-54AB-116
Type:
Unipolar Stepping Motor
SKU:
29555
Voltage Rating:
2.1V
Coil Resistance:
1.4 Ohm
Step Angle:
1.8 Degrees per Step
Steps per Revolution:
200
Motor Configuration:
Unipolar
Lot Number:
2106
Shaft Output:
Timing Pulley (toothed, installed on shaft)
Connector Type:
Multi-pin red housing connector, flying leads
Country/Region of Manufacture:
Japan
Form Factor:
Flange-mount with mounting bracket
Seller Notes:
Includes installed timing pulley and multi-pin connector harness.
Condition:
Used – Inspected and in Good Condition
Review Status:
Auto-Approved (needs review) 2026-07-04
Condition Notes:
TEC SPH-54AB-116 unipolar stepper motor. Inspected and in good used condition. Light surface wear on motor body; label legible. Timing pulley and multi-pin connector harness included. Please contact us with any questions.
Shinano Kenshi 127K94840 STH-54D403 stepper motor front-angle view with gear on shaft and label visible Shinano Kenshi STH-54D403 stepper motor rear and side view showing wiring harness and aluminum flange
Add to Cart
Quick view

Shinano Kenshi 127K94840 STH-54D403 Stepper Motor Unipolar 8V 1.2A 1.8°/Step

Shinano Kenshi

$25.00
Was: $50.00
Shinano Kenshi 127K94840 STH-54D403 Stepper Motor Unipolar 8V 1.2A 1.8°/StepUnipolar stepper motor manufactured by Shinano Kenshi. Provides precise rotational control in 1.8° increments, delivering...
29553
SKU:
29553
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
Shinano Kenshi
Model:
STH-54D403
MPN:
127K94840
Type:
Unipolar Stepper Motor
SKU:
29553
Voltage Rating:
8V DC
Current Rating:
1.2A
Step Angle:
1.8° per step
Steps per Revolution:
200
Motor Configuration:
Unipolar
Thermal Protection:
Yes — Thermally Protected
Flange Size:
2.22" square (NEMA 23 compatible)
Mounting Hole Pattern:
0.2" holes on 1.856" square pattern
Shaft Diameter:
0.25" (6.35mm)
Shaft Length:
0.87"
Motor Body Length:
2.6"
Motor Body Diameter:
2.2"
Connector Type:
6-pin JST-style housing with flying leads
Number of Leads:
6
Included Accessories:
Gear on shaft, 6-pin wiring harness
Country/Region of Manufacture:
Japan
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Includes gear mounted on shaft and attached 6-pin wiring harness.
Condition Notes:
Shinano Kenshi 127K94840 STH-54D403 stepper motor inspected and in good used condition. Gear and wiring harness present. Minor surface wear possible. Please view photos and contact us with questions.