Hiden Analytical

Hiden Analytical HAL RC ESP HAL IV Plasma Probe Controller 100-240V 300VA

(No reviews yet) Write a Review
SKU:
53318
MPN:
HAL RC ESP
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
20.00 LBS
Shipping:
Calculated at Checkout
  • Hiden Analytical HAL IV ESP Controller – angled front-left view showing silver front panel, green power switch, Run and Fault LEDs, and black top cover with surface scratches
  • Hiden Analytical HAL RC ESP Controller – straight-on front panel view showing Hiden Analytical logo, green illuminated power switch, Run green LED and Fault red LED indicators, and HAL IV ESP Controller label
  • Hiden Analytical HAL RC ESP – close-up of front panel left side showing green rocker power switch and Hiden Analytical logo with visible wear and surface marks on panel
  • Hiden Analytical HAL IV ESP Controller – close-up of front panel right side showing Run and Fault LED status indicators and HAL IV ESP Controller label
  • Hiden Analytical HAL RC ESP – rear panel view showing BNC Probe (ESP-01), Guard (ESP-02), Drive (ESP-11) connectors, DB9 RS-232 (MC-04), DB15 RS-485 (MC-03), DB15 (MC-02), DB25 AUX I/O (ESP-03), DB15 Trips (ESP-04), DB15 Limit Switch (ESP-05), Reset button, multi-pin Motor connector, IEC power inlet with 6.3AT 250V fuse, ventilation grille, CE mark, model label reading HAL RC ESP, and power rating label 100-240V 50-60Hz 300VA Max
  • Hiden Analytical HAL RC ESP Electrostatic Plasma Probe Controller HAL IV ESP
  • Hiden Analytical HAL RC ESP Electrostatic Plasma Probe Controller HAL IV ESP
  • Hiden Analytical HAL RC ESP Electrostatic Plasma Probe Controller HAL IV ESP
  • Hiden Analytical HAL RC ESP Electrostatic Plasma Probe Controller HAL IV ESP
  • Hiden Analytical HAL RC ESP Electrostatic Plasma Probe Controller HAL IV ESP
  • Hiden Analytical HAL RC ESP Electrostatic Plasma Probe Controller HAL IV ESP
$1,500.00
Was: $2,999.99
Current Stock: 1

Sold Out

Description

Hiden Analytical HAL RC ESP HAL IV Plasma Probe Controller 100-240V 300VA

Rackmount controller for Hiden Analytical electrostatic plasma probe (ESP) systems. Manages probe operation and data acquisition for plasma diagnostics in semiconductor processing environments.

Specifications & What's Included

  • Model: HAL RC ESP / HAL IV ESP
  • Form Factor: 2U rackmount
  • Power: 100-240V AC, 50-60Hz, 300VA max
  • Interfaces: RS-232, RS-485, BNC probe connectors
  • Front Panel: Run (green LED) and Fault (red LED) indicators
  • Includes: Controller unit only; no probe or accessories

Applications

Used for electrostatic plasma probe control in plasma etch, CVD, and semiconductor process diagnostics.

Condition: Used
This Hiden Analytical HAL RC ESP HAL IV Plasma Probe Controller (100-240V, 300VA) was removed from an active working environment where it performed reliably. The unit exhibits normal cosmetic wear consistent with laboratory or industrial use. As a pull from service, it retains full operational functionality and is ready for continued deployment in compatible systems.
View AllClose

Warranty Information

Sold as-is in used condition. No warranty is expressed or implied. Please review all photos and contact us with any questions prior to purchase.
View AllClose

Additional Information

Brand:
Hiden Analytical
Model:
HAL RC ESP
Secondary Model:
HAL IV ESP
MPN:
HAL RC ESP
SKU:
53318
Condition:
Used – Pulled from Working Environment
Seller Notes:
Controller only; no probe or accessories confirmed included. Please contact us with questions before purchasing.
Form Factor:
Rackmount, 2U
Power Requirements:
100-240V AC, 50-60Hz, 300VA Max
Fuse Rating:
6.3AT 250V
Interface Type:
RS-232, RS-485
Connector Types:
BNC (Probe ESP-01, Guard ESP-02, Drive ESP-11), DB9 RS-232, DB15 RS-485, DB25 AUX I/O, DB15 Trips, DB15 Limit Switch, Multi-pin Motor connector
Application / Use Case:
Electrostatic plasma probe (ESP) control for plasma etch, CVD, and semiconductor process diagnostics
Indicator Lights:
Run (green LED), Fault (red LED) on front panel
Compatible With:
Hiden Analytical HAL series electrostatic plasma probe systems
Country of Manufacture:
United Kingdom
Condition Notes:
Hiden Analytical HAL IV Plasma Probe Controller pulled from working environment. Shows normal wear from active use. 100-240V, 300VA. Ready to use.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Hiden Analytical ESPION Advanced Langmuir Probe Controller – front-right three-quarter view showing silver rackmount chassis with power switch and Run LED Hiden Analytical ESPION Langmuir Probe Controller – front-left three-quarter view showing full front panel with Hiden Analytical branding and ESPION label
Add to Cart
Quick view

Hiden Analytical ESPION Advanced Langmuir Probe Controller 115V 300VA

Hiden Analytical

$2,500.00
Was: $4,999.99
Hiden Analytical ESPION Advanced Langmuir Probe Controller 115V 300VA Rackmount controller unit for Langmuir probe plasma diagnostics. Measures plasma parameters in discharge chambers and etch...
53319
SKU:
53319
Availability:
Usually ships within 1-2 business days.
Weight:
25.00 LBS
Brand:
Hiden Analytical
Model:
ESPION
MPN:
ESPION
SKU:
53319
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit only; no probe or accessories included
Form Factor:
Rackmount, 2U
Power Requirements:
115V AC, 300VA Max, 6.3AT 250V Fuse
Country of Manufacture:
United Kingdom
Application / Use Case:
Langmuir probe plasma diagnostics
Interface Type:
RS232, RS485/RS422, 10 Base 2, AUX I/O
Connector Types:
DB-9, DB-25, BNC, DIN Analogue Input
Rear Ports:
ESP-01 Trigger, ESP-02 Z-Drive, ESP-03 AUX I/O, ESP-04 Probe
Communication Ports:
MC-04 RS232, MC-03 RS485/RS422, MC-02 10Base2
Analogue Input:
ESP-07 DIN connector
Compatible With:
Hiden Langmuir probe systems, plasma etch chambers
Measurement Type:
Plasma parameter measurement via Langmuir probe
Condition Notes:
Hiden Analytical ESPION Advanced Langmuir Probe Controller 115V 300VA in used condition. This unit was removed from a working laboratory environment during a system upgrade and has been tested and verified to power on and function properly.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Hiden Analytical ESPion Advanced Langmuir Probe EPIU – front panel three-quarter view showing Run LED and Hiden logo Hiden Analytical EPIU ESPion Langmuir Probe – front panel straight-on view showing illuminated green Run LED
Add to Cart
Quick view

Hiden Analytical EPIU ESPion Advanced Langmuir Probe 115V Plasma Diagnostics

Hiden Analytical

$2,600.00
Was: $5,200.00
Hiden Analytical EPIU ESPion Advanced Langmuir Probe 115V Plasma Diagnostics Rackmount plasma diagnostics controller for Langmuir probe measurements. The ESPion unit processes probe data and...
53321
SKU:
53321
Availability:
Usually ships within 1-2 business days.
Weight:
25.00 LBS
Brand:
Hiden Analytical
Model:
ESPion
MPN:
EPIU
SKU:
53321
Condition:
Used – Inspected
Seller Notes:
Unit only; no probe tip or cables included unless shown in photos
Form Factor:
Rackmount, 2U
Power Requirements:
115V AC, 300VA Max, 6.3AT 250V Fuse
Application / Use Case:
Plasma diagnostics, Langmuir probe measurements
Interface Type:
RS232 (MC-04), RS485/RS422 (MC-03), 10 BASE 2 (MC-02)
I/O Ports:
Trigger (ESP-01), Z-Drive (ESP-02), AUX I/O (ESP-03)
Probe Port:
ESP-04 (DB9), Analogue Input ESP-07 (DIN connector)
Standards:
CE Marked
Country of Manufacture:
United Kingdom
Condition Notes:
This Hiden Analytical EPIU ESPion Advanced Langmuir Probe has been inspected and is in good used cosmetic condition. It was pulled from a working plasma diagnostics environment where it was previously in active use.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
RF Plasma Products LES-300 Laser Endpoint System 300 Controller — front panel three-quarter view showing INTENSITY display, ON/OFF switch, LASER keyswitch, and process control toggle switches LES-300 front panel close-up showing red INTENSITY LED display, ON/OFF toggle, START switch, LASER keyswitch with key inserted, and laser caution label
Add to Cart
Quick view

RF Plasma Products LES-300 Laser Endpoint System 300 Controller 120VAC For Parts

RF Plasma Products, Inc.

$250.00
Was: $500.00
RF Plasma Products LES-300 Laser Endpoint System 300 Controller 120VAC For PartsLaser endpoint detection controller for plasma etch systems. Uses a 4mW He-Ne laser to monitor etch process endpoints...
36660
SKU:
36660
Availability:
Usually ships within 1–2 business days.
Weight:
15.00 LBS
Brand:
RF Plasma Products, Inc.
Model:
LES-300
MPN:
LES-300 Controller
Type:
Laser Endpoint Detection Controller
SKU:
36660
Condition:
As-Is / For Parts or Not Working
Seller Notes:
Sold for parts or repair. No power supply included.
Country/Region of Manufacture:
USA
Power Requirements:
120VAC, 50/60 Hz, 2A
Laser Rating:
4mW Max He-Ne
Form Factor:
Rackmount
Rear Interface Connectors:
Interface J2 (circular multi-pin), Detector J3 (circular multi-pin)
Analog Output:
2x BNC analog output connectors (rear panel)
Input/Test Ports:
Input Test connectors on rear panel
Fuse Rating:
2 AMP
Regulatory Compliance:
21 CFR 1040.10 and 1040.11
Front Panel Controls:
ON/OFF, INTENSITY display, START, LASER keyswitch, DELAY, SEARCH, ENDPT, NO ENDPT, OVER-ETCH, STOP
Front Panel Indicators:
LED indicators: DELAY, SEARCH, ENDPT, NO ENDPT, OVER-ETCH, STOP
Front Panel Switches:
Toggle switches: DELAY, RATE, END 1, END 2, OVER-ETCH, MODE
Application:
Plasma etch endpoint detection, semiconductor fabrication
Manufacture Date:
12/87
Compatible With:
He-Ne laser plasma etch systems, RF plasma etch equipment
Condition Notes:
RF Plasma Products LES-300 Laser Endpoint System 300 Controller sold as-is for parts or repair. No power supply included. Not tested, not guaranteed functional. Fair cosmetic condition; front panel and rear connectors appear intact. Key included.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov