Hiden Analytical
-
Hiden Analytical EPIU ESPion Advanced Langmuir Probe 115V Plasma Diagnostics
Hiden Analytical
$2,600.00Was: $5,200.00Hiden Analytical EPIU ESPion Advanced Langmuir Probe 115V Plasma Diagnostics Rackmount plasma diagnostics controller for Langmuir probe measurements. The ESPion unit processes probe data and...53321- SKU:
- 53321
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Hiden Analytical
- Model:
- ESPion
- MPN:
- EPIU
- SKU:
- 53321
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no probe tip or cables included unless shown in photos
- Form Factor:
- Rackmount, 2U
- Power Requirements:
- 115V AC, 300VA Max, 6.3AT 250V Fuse
- Application / Use Case:
- Plasma diagnostics, Langmuir probe measurements
- Interface Type:
- RS232 (MC-04), RS485/RS422 (MC-03), 10 BASE 2 (MC-02)
- I/O Ports:
- Trigger (ESP-01), Z-Drive (ESP-02), AUX I/O (ESP-03)
- Probe Port:
- ESP-04 (DB9), Analogue Input ESP-07 (DIN connector)
- Standards:
- CE Marked
- Country of Manufacture:
- United Kingdom
- Condition Notes:
- This Hiden Analytical EPIU ESPion Advanced Langmuir Probe has been inspected and is in good used cosmetic condition. It was pulled from a working plasma diagnostics environment where it was previously in active use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$2,600.00Was: $5,200.00 -
Hiden Analytical LMC Linear Motion Driver 100-240V 300VA Max LMD-01 LMD-02
Hiden Analytical
$1,500.00Was: $3,000.00Hiden Analytical LMC Linear Motion Driver 100-240V 300VA Max LMD-01 LMD-02 2U rackmount linear motion driver manufactured by Hiden Analytical in the United Kingdom. Controls stepper or servo motor...53320- SKU:
- 53320
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 24.00 LBS
- Brand:
- Hiden Analytical
- Model:
- LMC
- MPN:
- LMC
- SKU:
- 53320
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold as-is for parts or repair. Not tested.
- Form Factor:
- Rackmount, 2U
- Power Requirements:
- 100-240V AC, 50-60Hz, 300VA Max
- Fuse Rating:
- 6.3AT 250V
- Interface / Connectors:
- Control I/O (LMD-01), Linear Motion (LMD-02)
- Motor Connector:
- LMD-07 (4-pin circular)
- Application / Use Case:
- Linear motion control for analytical instruments
- Compatible With:
- Hiden Analytical mass spectrometer systems
- Country of Manufacture:
- United Kingdom
- Condition Notes:
- Hiden Analytical LMC Linear Motion Driver 100-240V 300VA Max (LMD-01/LMD-02) in used condition. This unit has been tested and is in working order. Cosmetically, the silver front panel is clean with minor scuffing, while the black top cover shows
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$1,500.00Was: $3,000.00 -
Hiden Analytical ESPION Advanced Langmuir Probe Controller 115V 300VA
Hiden Analytical
$2,500.00Was: $4,999.99Hiden Analytical ESPION Advanced Langmuir Probe Controller 115V 300VA Rackmount controller unit for Langmuir probe plasma diagnostics. Measures plasma parameters in discharge chambers and etch...53319- SKU:
- 53319
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Hiden Analytical
- Model:
- ESPION
- MPN:
- ESPION
- SKU:
- 53319
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no probe or accessories included
- Form Factor:
- Rackmount, 2U
- Power Requirements:
- 115V AC, 300VA Max, 6.3AT 250V Fuse
- Country of Manufacture:
- United Kingdom
- Application / Use Case:
- Langmuir probe plasma diagnostics
- Interface Type:
- RS232, RS485/RS422, 10 Base 2, AUX I/O
- Connector Types:
- DB-9, DB-25, BNC, DIN Analogue Input
- Rear Ports:
- ESP-01 Trigger, ESP-02 Z-Drive, ESP-03 AUX I/O, ESP-04 Probe
- Communication Ports:
- MC-04 RS232, MC-03 RS485/RS422, MC-02 10Base2
- Analogue Input:
- ESP-07 DIN connector
- Compatible With:
- Hiden Langmuir probe systems, plasma etch chambers
- Measurement Type:
- Plasma parameter measurement via Langmuir probe
- Condition Notes:
- Hiden Analytical ESPION Advanced Langmuir Probe Controller 115V 300VA in used condition. This unit was removed from a working laboratory environment during a system upgrade and has been tested and verified to power on and function properly.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$2,500.00Was: $4,999.99 -
Hiden Analytical HAL RC ESP HAL IV Plasma Probe Controller 100-240V 300VA
Hiden Analytical
$1,500.00Was: $2,999.99Hiden Analytical HAL RC ESP HAL IV Plasma Probe Controller 100-240V 300VA Rackmount controller for Hiden Analytical electrostatic plasma probe (ESP) systems. Manages probe operation and data...53318- SKU:
- 53318
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 20.00 LBS
- Brand:
- Hiden Analytical
- Model:
- HAL RC ESP
- Secondary Model:
- HAL IV ESP
- MPN:
- HAL RC ESP
- SKU:
- 53318
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Controller only; no probe or accessories confirmed included. Please contact us with questions before purchasing.
- Form Factor:
- Rackmount, 2U
- Power Requirements:
- 100-240V AC, 50-60Hz, 300VA Max
- Fuse Rating:
- 6.3AT 250V
- Interface Type:
- RS-232, RS-485
- Connector Types:
- BNC (Probe ESP-01, Guard ESP-02, Drive ESP-11), DB9 RS-232, DB15 RS-485, DB25 AUX I/O, DB15 Trips, DB15 Limit Switch, Multi-pin Motor connector
- Application / Use Case:
- Electrostatic plasma probe (ESP) control for plasma etch, CVD, and semiconductor process diagnostics
- Indicator Lights:
- Run (green LED), Fault (red LED) on front panel
- Compatible With:
- Hiden Analytical HAL series electrostatic plasma probe systems
- Country of Manufacture:
- United Kingdom
- Condition Notes:
- Hiden Analytical HAL IV Plasma Probe Controller pulled from working environment. Shows normal wear from active use. 100-240V, 300VA. Ready to use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$1,500.00Was: $2,999.99