Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Philips BTS PA-3001A Audio Power Supply module – front-left angled view showing AUDIO PA-3001 label, green LED indicator, and vented top panel Philips BTS PA-3001A Audio Power Supply – rear-left angled view showing IEC C14 AC inlet, TE and PE binding post terminals, and CE marking

    Philips BTS ASSY PA-3001A Audio Power Supply 120/240V 47-63Hz Broadcast

    Broadcast Television Systems

    $55.00
    Was: $100.00
    Philips BTS ASSY PA-3001A Audio Power Supply 120/240V 47-63Hz Broadcast Slide-in power supply module designed for Philips BTS broadcast television systems. Converts AC input to regulated DC output for audio signal processing and amplification in...
    40021
    SKU:
    40021
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    Philips
    Model:
    PA-3001A
    MPN:
    ASSY PA-3001A
    Type:
    Audio Power Supply Module
    SKU:
    40021
    Condition:
    Used – Inspected
    Seller Notes:
    Philips BTS PA-3001A Audio PS module; unit only, no additional accessories
    Country/Region of Manufacture:
    United States
    Form Factor:
    Slide-In Module
    Power Requirements:
    120/240V AC, 47-63Hz
    Input Voltage:
    120/240V AC
    Input Current:
    120V: 1.5A / 230V: 1.80A
    Frequency:
    47-63Hz
    Fuse Rating:
    120V: 1.5A 250V Slow Blow / 230V: T 1.80A 250V
    Application:
    Broadcast Television Systems Audio
    Manufacturer:
    Broadcast Television Systems — A Philips Company
    Compatible With:
    Philips BTS broadcast television systems
    Input Connector:
    IEC C14 (3-pin male inlet)
    Output Terminals:
    TE and PE binding posts
    Indicators:
    DC power LED (green), Power On switch, Lock mechanism
    Hardware Revision:
    D
    Condition Notes:
    Philips BTS PA-3001A Audio Power Supply. Inspected and in good condition. Normal wear from prior broadcast use. Housing, IEC inlet, binding posts, and front controls intact. See photos for details.
    $55.00
    Was: $100.00
  • Cosmodyne 3200532-1 dial pressure gauge front view showing 0-15 PSI scale with black panel-mount housing Cosmodyne 3200532-1 gauge face close-up showing PRESSURE P.S.I. label, black pointer, and 0-15 PSI scale markings

    Cosmodyne 3200532-1 Dial Pressure Gauge 0-15 PSI Panel Mount Brass NPT Fitting

    Cosmodyne

    $20.00
    Was: $40.00
    Cosmodyne 3200532-1 Dial Pressure Gauge 0-15 PSI Panel Mount Brass NPT FittingAnalog dial pressure gauge for monitoring system pressure in industrial and telecom applications. Designed for direct panel mounting with bottom/rear NPT connection...
    39983
    SKU:
    39983
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cosmodyne
    Model:
    3200532-1
    MPN:
    3200532-1
    Type:
    Dial Pressure Gauge
    SKU:
    39983
    Pressure Range:
    0-15 PSI
    Display Type:
    Analog Dial
    Scale Units:
    PSI (Pounds per Square Inch)
    Mounting Style:
    Panel Mount
    Process Connection:
    Brass NPT (bottom/rear entry)
    Housing Color:
    Black
    Dial Color:
    White
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only, no additional accessories included.
    Form Factor:
    Round Panel Gauge
    Condition Notes:
    Cosmodyne 3200532-1 dial pressure gauge, 0-15 PSI. Inspected and in good used condition. Dial face clean and legible; black housing shows light surface wear; brass NPT fitting intact. Please contact us with any questions.
    $20.00
    Was: $40.00
  • Computer Products NFS40-7912 open-frame switching power supply — front/top view showing PCB, transformer, capacitors, and multi-pin wire harness Computer Products NFS40-7912 switching power supply — angled reverse view showing component side and output wire harness connectors

    Computer Products NFS40-7912 12VDC 4A Switching Power Supply 100-230VAC Open

    Computer Products

    $40.00
    Was: $80.00
    Computer Products NFS40-7912 12VDC 4A Switching Power Supply 100-230VAC Open FrameOpen-frame switching power supply that converts 100-230VAC input to regulated 12VDC at 4A output. Board-level unit without enclosure, designed for industrial and...
    39953
    SKU:
    39953
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Computer Products
    Model:
    NFS40-7912
    MPN:
    NFS40-7912
    Secondary Model:
    720132-34
    SKU:
    39953
    Type:
    Open-Frame Switching Power Supply
    Output Voltage:
    12V DC
    Output Current:
    4A
    Output Power:
    48W
    Input Voltage:
    100-230V AC
    Input Current:
    1.3-0.65A
    Input Frequency:
    50/60Hz
    Form Factor:
    Open Frame / Board-Level (No Enclosure)
    Power Requirements:
    100-230VAC, 1.3-0.65A, 50/60Hz
    Output Connector:
    Multi-pin wire harness
    Revision:
    Rev Y
    Compatible With:
    Pacesetter APSu 3251 Portable Thermal Printer
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Open-frame board only, no enclosure. Tested — outputs 12VDC confirmed.
    Country/Region of Manufacture:
    China
    Certifications:
    UL Listed, CE, CSA
    Condition Notes:
    Computer Products NFS40-7912 switching power supply tested good — confirmed 12VDC output on our multimeter. Good working order. Open-frame board only, no enclosure. Normal wear. Please view photos and contact us with questions.
    $40.00
    Was: $80.00
  • Varian VZC6961D7A1 C-Band TWTA – front panel with Varian logo, status/fault LED indicators, helix current meter, power and HV switches Varian VZC6961D7A1 C-Band TWTA – rear panel showing waveguide RF output flange, fuse holders, D-sub control connector, local/remote switch, and cooling vents

    Varian VZC6961D7A1 C-Band TWTA 5.9-6.4 GHz 50dB Gain Satcom Upconverter

    Varian

    $1,500.00
    Was: $3,000.00
    Varian VZC6961D7A1 C-Band TWTA 5.9-6.4 GHz 50dB Gain Satcom Upconverter TransmitterC-Band traveling wave tube amplifier (TWTA) for satellite uplink transmission. Provides 50 dB gain across 5.9–6.4 GHz with waveguide RF output and includes integrated...
    39941
    SKU:
    39941
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    45.00 LBS
    Brand:
    Varian
    Model:
    VZC6961D7A1
    MPN:
    VZC6961D7A1
    Type:
    C-Band Traveling Wave Tube Amplifier (TWTA)
    SKU:
    39941
    Frequency Range:
    5.9 – 6.4 GHz
    Frequency Band:
    C-Band
    Gain:
    50 dB
    RF Output Interface:
    Waveguide (WR-137 flange)
    RF Input Connector:
    Type N (front panel)
    RF Sample Connector:
    Type N (front panel)
    Control Interface:
    Local/Remote switch; 25-pin D-Sub connector
    TWT Type:
    VTC-6161H4
    Heater Voltage (Ef):
    6.3 V
    Collector Voltage (Eb):
    2400 Vdc
    Helix-GND Voltage (Ew):
    4800 Vdc
    Upconverter Module:
    Western Microwave ICW-9070
    TWT P/N:
    113798-03
    Code Ident:
    59782
    Form Factor:
    Rackmount, 2U
    Country/Region of Manufacture:
    United States
    Application:
    Satellite uplink, C-band earth station transmitter
    Front Panel Indicators:
    Power, Filtd, Stdby, HV ON, Fault; Temp, VSWR, Int, Ext, Helix
    Front Panel Controls:
    POWER switch, HV ON/OFF/RESET switch, IND RESET button, RF Gain Adj knob, Helix Current meter
    Condition:
    Used – Inspected and in good condition
    Seller Notes:
    Unit only; no cables or accessories observed. Western Microwave ICW-9070 upconverter installed internally.
    Condition Notes:
    Varian VZC6961D7A1 C-Band TWTA inspected and in good used condition. Front panel controls, indicators, and meters intact. Waveguide output shows minor surface wear. Interior TWT and upconverter assembly present and complete.
    $1,500.00
    Was: $3,000.00
  • Cylix DB25-PARLL isolated loop data line surge protector — top/front view showing DB25 female connector and green ground wire with spade lug Cylix DB25-PARLL data line surge protector — reverse side showing DB25 male connector and UL listing label on housing

    Cylix DB25-PARLL Isolated Loop DB25 Data Line Surge Protector All Pins

    Cylix

    $25.00
    Was: $50.00
    Cylix DB25-PARLL Isolated Loop DB25 Data Line Surge Protector All PinsInline surge and transient protection device for DB25 parallel and RS-232 serial data connections. Protects all 25 pins using isolated loop technology with earth ground connection...
    39868
    SKU:
    39868
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cylix
    Model:
    DB25-PARLL
    MPN:
    DB25-PARLL
    Type:
    Isolated Loop Data Line Surge Protector
    SKU:
    39868
    Connector Type:
    DB25 (25-Pin D-Sub)
    Pin Protection:
    All 25 Pins
    Protection Type:
    Isolated Loop / Surge & Transient
    Interface:
    DB25 Parallel / RS-232 Serial
    Ground Connection:
    Earth Ground Wire (Green, Spade Lug)
    UL Listed:
    Yes
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes ground wire with spade lug connector. Unit only — no additional accessories.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Inline / Pass-Through
    Condition Notes:
    Cylix DB25-PARLL Isolated Loop Surge Protector inspected and in good condition. Housing intact, DB25 connectors clean, ground wire present. Minor normal surface wear. Please contact us with any questions.
    $25.00
    Was: $50.00
  • APC PSP25 ProtectNet Serial Parallel Port Surge Protector — front view showing DB25 male connector and red retention screws APC PSP25 ProtectNet Serial Parallel Port Surge Protector — rear view showing DB25 female connector port side

    APC PSP25 ProtectNet Serial Parallel Port Surge Protector DB25 All 25 Lines

    APC

    $12.00
    Was: $25.00
    APC PSP25 ProtectNet Serial Parallel Port Surge Protector DB25 All 25 LinesThe APC PSP25 ProtectNet is an inline isolated loop circuit protector designed to safeguard serial and parallel port data lines from damaging voltage surges and transients. It...
    39867
    SKU:
    39867
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    APC
    Model:
    PSP25
    MPN:
    PSP25
    Type:
    Serial/Parallel Port Surge Protector
    SKU:
    39867
    Connector Type:
    DB25 (25-pin) Male to Female
    Number of Lines Protected:
    25
    Protection Type:
    Isolated Loop Circuit Protection
    Compatible With:
    Serial and Parallel port devices, DB25 interfaces
    Certifications:
    UL Listed (13KA)
    Country/Region of Manufacture:
    China
    Form Factor:
    Inline Adapter
    Seller Notes:
    Unit only — no packaging or accessories.
    Condition:
    Used – Inspected
    Condition Notes:
    APC PSP25 ProtectNet Serial/Parallel Port Surge Protector. Inspected and in good used condition. Housing shows minor surface scuffing; DB25 connectors clean and intact, retention screws present.
    $12.00
    Was: $25.00
  • Varian VZC-6965F7 700W C-Band TWTA amplifier stacked with TWTA power supply unit — front view, both chassis on pallet Varian VZC-6965F7 front panel close-up showing RF Drive Power, RF Reflected Power, and RF Output Power digital meters with control switches

    Varian VZC-6965F7 700W C-Band TWTA & Power Supply 01008290-00 RF Assy For Parts

    Varian

    $750.00
    Was: $1,500.00
    Varian VZC-6965F7 700W C-Band TWTA & Power Supply 01008290-00 RF Assy For PartsThis is a matched, serialized two-unit set consisting of a Varian VZC-6965F7 700-watt C-Band traveling wave tube amplifier (TWTA) and its companion TWTA power supply...
    39838
    SKU:
    39838
    Availability:
    This item requires freight shipping. Please contact us for a shipping quote or to arrange local pickup.
    Weight:
    305.00 LBS
    Brand:
    Varian
    Model:
    VZC-6965F7
    Secondary Model:
    01008290-00
    MPN:
    VZC-6965F7
    RF Assembly P/N:
    01007747-03
    Power Supply Model:
    01008290-00
    RF Assembly Model:
    VZC6965F7-7SR
    SKU:
    39838
    Type:
    C-Band Traveling Wave Tube Amplifier (TWTA)
    Frequency Band:
    C-Band
    Output Power:
    700 W
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Matched set: TWTA amplifier + power supply. Tube tested bad, no RF output. AS-IS.
    Filament Hours:
    32082 hours (per front-panel meter)
    Power Input:
    120 VAC (per rear panel label)
    Connectors - RF:
    RF IN, RF OUT (waveguide flange on rear)
    Connectors - Control:
    JSA, JSB (D-sub), J2, J3, J4, J5 (circular)
    Cooling:
    Forced air — dual large axial fans
    Form Factor:
    Rackmount / Freestanding Chassis, 2-unit stacked set
    Country/Region of Manufacture:
    United States
    Manufacturer:
    Varian Microwave Equipment Products, Santa Clara, CA
    Application:
    Satellite uplink, C-Band RF amplification
    Includes:
    TWTA amplifier unit + matched TWTA power supply
    Shipping:
    Freight shipping required — contact seller for quote
    Condition Notes:
    Varian VZC-6965F7 700W C-Band TWTA — TWT tube tested bad, no RF output. Sold AS-IS for parts or repair. Matched set with power supply 01008290-00. Freight shipping required. Contact us for quote.
    $750.00
    Was: $1,500.00
  • Sony ANL-42 1-689-131-11 PCB card front view showing components, ICs, and rating markings 4A 125V Sony ANL-42 circuit board rear/solder side view showing PCB traces and connector pads

    Sony ANL-42 1-689-131-11 PCB Card 4A 125V Internal Circuit Board Module

    Sony

    $20.00
    Was: $40.00
    Sony ANL-42 1-689-131-11 PCB Card 4A 125V Internal Circuit Board ModuleInternal circuit board card designed for Sony industrial and telecom equipment. This PCB module handles power distribution and circuit control functions within larger systems...
    39827
    SKU:
    39827
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Sony
    Model:
    ANL-42
    MPN:
    1-689-131-11
    Type:
    Internal PCB Circuit Board Card
    SKU:
    39827
    Voltage Rating:
    125V
    Current Rating:
    4A
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Card / Module
    Certifications:
    UL (mark visible on board)
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Board only; no enclosure or cables included.
    Condition Notes:
    Sony ANL-42 1-689-131-11 PCB card inspected and in good used condition. No visible damage, burnt components, or broken traces. Pulled from equipment. Please view photos and contact us with questions.
    $20.00
    Was: $40.00