Description
Burkert 00120617 Solenoid Valve Control Head 2/2-Way 24VDC 8W 1941380T M12
The Burkert 00120617 is a 2/2-way (2-port, 2-position) direct-acting solenoid valve control head designed to mount on a compatible pneumatic manifold. It operates on 24V DC at 8W and uses NBR (nitrile) seals, making it suitable for a range of pneumatic and fluid control applications. This listing includes the solenoid control head, the matching Burkert 1941380T (MICR-0211-ST) brass manifold block, and a 6.5-foot M12 block cable for electrical connection.
Specifications & What's Included
- Make: Burkert (Made in Germany)
- Solenoid Control Head Part Number: 00120617
- Valve Configuration: 2/2-Way (2-port, 2-position)
- Supply Voltage: 24V DC
- Power Consumption: 8W
- Seal Material: NBR (Nitrile)
- Lot / Variant Code: W27LS
- Certifications: CE
- Manifold Block Part Number: 1941380T
- Manifold Model: MICR-0211-ST
- Manifold Material: Brass
- Manifold Ports: Three push-to-connect pneumatic fittings (6mm, blue/white)
- Included Cable: Burkert M12 block cable, approx. 6.5 ft (H05RN-F jacket, 4-pin straight male M12 connector)
Applications
Burkert 2/2-way solenoid control heads of this type are used to switch pneumatic or fluid flow on and off in automated process systems. They are commonly found in laboratory automation, pharmaceutical and biotech fluid handling, semiconductor fabrication, food and beverage processing, and general industrial pneumatic circuits. The modular design — a solenoid head mounted on a manifold block — allows multiple valves to be ganged together in a compact inline assembly, which is a standard approach in process-control skids and automated test equipment. The 24V DC coil voltage is the most common control voltage in industrial PLC-driven systems, and the M12 connector format is the standard interface for industrial field-bus and discrete I/O wiring.
This Burkert 00120617 Solenoid Valve Control Head was pulled from a working environment where it was previously in service. The brass manifold block (1941380T, MICR-0211-ST) shows normal oxidation and patina consistent with industrial use. The solenoid head and its label are intact and legible. The three push-to-connect pneumatic fittings appear undamaged. The included 6.5 ft M12 block cable is in good cosmetic shape with no visible damage to the jacket or connector. This unit has not been powered up or tested at our facility. Please review all photos and contact us with any questions before purchasing.
Warranty Information
Additional Information
Brand: |
Burkert |
Model: |
00120617 |
MPN: |
00120617 |
Secondary Model: |
1941380T |
Type: |
Solenoid Valve Control Head |
SKU: |
46577 |
Seller Notes: |
Includes Burkert 1941380T MICR-0211-SI brass manifold block and 6.5 ft M12 block cable |
Country/Region of Manufacture: |
Germany |
Valve Configuration: |
2/2-Way (2-port, 2-position) |
Voltage: |
24V DC |
Power Consumption: |
8W |
Seal Material: |
NBR (Nitrile) |
Connector Type: |
M12 (4-pin straight male) |
Cable Length: |
6.5 ft (approx. 2 m) |
Manifold Part Number: |
1941380T |
Manifold Model: |
MICR-0211-ST |
Port Type: |
Push-to-connect pneumatic fittings (6mm) |
Certifications: |
CE |
Lot Code / Variant: |
W27LS |
Form Factor: |
Inline Manifold-Mounted Control Head |
Actuator Type: |
Solenoid (direct-acting) |
Condition Notes: |
Burkert 00120617 Solenoid Valve Control Head pulled from a working environment. Brass manifold shows normal oxidation/patina. Solenoid head and M12 cable intact. Not powered or tested at our facility. Please view photos and contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |
