Description
TCL 2110 Multiport Transceiver 9-Port w/ 8x 2110-BDM & 1x 2110-ADM 120VAC
The TCL 2110 is a benchtop multiport transceiver chassis designed for telecom and data communications applications. It provides nine DB-9 serial ports via installed interface cards, supporting multi-channel signal transmission and reception in industrial networking environments.
Specifications & What's Included
- 9-port configuration with 8x 2110-BDM cards and 1x 2110-ADM card installed
- 120 VAC, 60 Hz operation; 0.25 A draw; 0.5A 250V fast-blow fuse
- DB-9 (9-pin D-Sub) connectors per card slot
- UL Listed EDP Equipment; FCC Part 15 Class A certified
- AC power cord included
- Manufactured by TCL Inc., Fremont, CA
Applications
The 2110 series served telecom equipment racks and industrial control systems requiring serial port expansion and signal conversion. These units were deployed in telecommunications infrastructure, network management systems, and legacy data acquisition setups. The modular card design allowed configuration for specific protocol and signal requirements within Class A computing environments.
This TCL Inc. 2110 Multiport Transceiver has been inspected and appears to be in good used condition. The chassis shows general surface soiling and light wear consistent with prior use — notably there is grime and discoloration visible around one of the card module bays on the rear panel. The front panel and main chassis body are intact with no structural damage observed. All nine card slots are populated: eight 2110-BDM modules and one 2110-ADM module are installed, each with its DB-9 connector present. The AC power cord is included and shows normal use wear. This unit was not bench-tested at our facility. It was pulled from a working environment. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
TCL Inc. |
Model: |
2110 |
MPN: |
2110 |
Type: |
Multiport Transceiver |
SKU: |
8476 |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Includes 8x 2110-BDM cards and 1x 2110-ADM card; AC power cord included |
Country/Region of Manufacture: |
United States |
Form Factor: |
Benchtop / Desktop Chassis |
Power Requirements: |
120 VAC, 60 Hz, 0.25 A |
Fuse Rating: |
0.5A, 250V, Fast-Blow |
Number of Card Slots: |
9 |
Installed Cards: |
8x 2110-BDM, 1x 2110-ADM |
Connector Type: |
DB-9 (9-pin D-Sub) per card slot |
Number of Ports: |
9 (one DB-9 port per installed card) |
Certifications: |
UL Listed EDP Equipment (90K7), FCC Part 15 Class A |
Compatible With: |
Class A computing devices per FCC Part 15 |
Manufacturer Location: |
Fremont, CA 94539 |
Condition Notes: |
TCL 2110 Multiport Transceiver in good used condition. Chassis shows surface soiling and light wear. All 9 card slots populated (8x 2110-BDM, 1x 2110-ADM). AC cord included. Not bench-tested; pulled from a working environment. |
