Description
Steel Ball Bearing 1/4" Bore 1/4" x 1/2" x 3/16" Double Shielded Single Unit
Radial ball bearing with 1/4" bore diameter and double shields on both sides. Single unit suitable for general machinery and equipment requiring small-format bearings.
Specifications & What's Included
- Bore Diameter: 1/4 in (0.250 in)
- Outer Diameter: 1/2 in (0.500 in)
- Width: 3/16 in (0.1875 in)
- Type: Radial Ball Bearing
- Shield Type: Double Shielded (Both Sides)
- Material: Steel
- Quantity: Single Unit
Applications
Ball bearings of this size are commonly found in industrial machinery, telecom equipment, small motors, and precision instruments. They support rotating shafts and reduce friction in equipment requiring compact bearing assemblies. The double shields provide basic protection from dust and contamination in typical indoor environments.
Condition: Used
This steel double-shielded ball bearing (1/4" bore x 1/2" OD x 3/16" wide) has been inspected and is in good used condition. Both shields are intact with no visible damage. The bearing shows light surface wear consistent with prior use or storage, but the races and shields appear clean and undamaged. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This steel double-shielded ball bearing (1/4" bore x 1/2" OD x 3/16" wide) has been inspected and is in good used condition. Both shields are intact with no visible damage. The bearing shows light surface wear consistent with prior use or storage, but the races and shields appear clean and undamaged. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Unbranded |
Model: |
1/4 x 1/2 x 3/16 |
MPN: |
1/4 x 1/2 x 3/16 |
Type: |
Radial Ball Bearing |
SKU: |
30473 |
Bore Diameter: |
1/4 in (0.250 in) |
Outer Diameter: |
1/2 in (0.500 in) |
Width: |
3/16 in (0.1875 in) |
Shield Type: |
Double Shielded (Both Sides) |
Material: |
Steel |
Quantity: |
Single Unit (1 Bearing) |
Condition: |
Used – Inspected |
Seller Notes: |
Single bearing. Both sides shielded. Inspect and lubricate before use. |
Country/Region of Manufacture: |
Unknown |
Condition Notes: |
Steel ball bearing 1/4" x 1/2" x 3/16", double shielded. Inspected and in good used condition. Both shields intact, races appear clean and undamaged. Single unit. |
