Description
Steel Ball Bearing 3/8" Bore 3/8 x 5/8 x 5/32 Double Shielded ZZ Single
Radial ball bearing with 3/8" bore diameter and double shields on both sides. Designed to support rotating shafts and reduce friction in mechanical assemblies.
Specifications & What's Included
- Bore Diameter: 3/8 in (0.375 in)
- Outer Diameter: 5/8 in (0.625 in)
- Width / Thickness: 5/32 in (0.156 in)
- Shield Type: Double Shielded (Both Sides)
- Material: Steel
- Quantity: 1 (Single Bearing)
Applications
This miniature radial ball bearing is used in industrial equipment, motors, pumps, and telecom hardware where compact size and sealed operation are required. Double shields protect against dust and debris while allowing the bearing to rotate freely. Suitable for equipment operating at moderate speeds and light to moderate loads.
Condition: Used
This steel double-shielded ball bearing (3/8" bore, 3/8 x 5/8 x 5/32") has been inspected and is in good used condition. Both shields are intact and the bearing rolls smoothly with no obvious binding or roughness. Normal light surface wear is expected on used bearings of this type. As with any used bearing, cleaning and fresh lubrication are recommended before putting it back into service. This listing is for a single bearing. Please view our photo set and contact us if you have any questions.
This steel double-shielded ball bearing (3/8" bore, 3/8 x 5/8 x 5/32") has been inspected and is in good used condition. Both shields are intact and the bearing rolls smoothly with no obvious binding or roughness. Normal light surface wear is expected on used bearings of this type. As with any used bearing, cleaning and fresh lubrication are recommended before putting it back into service. This listing is for a single bearing. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Unbranded |
Model: |
3/8 x 5/8 x 5/32 |
Type: |
Radial Ball Bearing |
SKU: |
30474 |
Bore Diameter: |
3/8 in (0.375 in) |
Outer Diameter: |
5/8 in (0.625 in) |
Width / Thickness: |
5/32 in (0.156 in) |
Shield Type: |
Double Shielded (Both Sides) |
Material: |
Steel |
Quantity: |
1 (Single Bearing) |
Condition: |
Used – Inspected, Good Condition |
Seller Notes: |
Single bearing; both sides shielded. Inspect photos before purchase. |
Form Factor: |
Miniature / Small Radial |
Condition Notes: |
Used steel ball bearing, 3/8" bore, 3/8x5/8x5/32, double shielded. Inspected and in good condition. Both shields intact, rolls smoothly. Single bearing. Clean and lubricate before reuse. |
