Description
Steel 1/4" Bore Ball Bearing 1/4" x 1/2" x 1/8" Single Shielded Miniature Pair
This listing is for a pair of two steel miniature radial ball bearings with a 1/4" bore, 1/2" outer diameter, and 1/8" width. One side of each bearing is shielded; the other side is open. These are standard deep-groove radial ball bearings in a common miniature size used across a wide range of small machinery and hobby applications.
Specifications & What's Included
- Bearing type: Deep groove radial ball bearing
- Bore (inner diameter): 1/4" (0.250 in)
- Outer diameter: 1/2" (0.500 in)
- Width: 1/8" (0.125 in)
- Shielding: Single shielded — one side shielded, one side open
- Material: Steel races and ball cage
- Quantity: Pair of 2 bearings
- Note: Clean and lubricate before putting into service
Applications
Miniature ball bearings in the 1/4" bore size are widely used in RC vehicles, small electric motors, 3D printers, robotics, hobby servos, small fans, optical equipment, and light industrial machinery wherever low-friction rotational support is needed in a compact form. The single-shielded design protects one face from debris while leaving the other side accessible for lubrication — a common configuration for applications where occasional re-lubrication is practical. This size is a long-standing standard in precision hobby and light engineering work and remains in common use today across consumer, educational, and light industrial settings.
This pair of steel miniature ball bearings (1/4" x 1/2" x 1/8", single shielded) is in good used condition. Both bearings have been inspected and show normal wear consistent with prior use. The steel races and ball cage appear intact with no visible damage. As with any used bearing, clean and lubricate before putting into service. Sold as a pair of two bearings. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Unbranded |
Model: |
1/4 x 1/2 x 1/8 Single Shielded |
Type: |
Miniature Radial Ball Bearing |
Bore Diameter: |
1/4" (0.250 in) |
Outer Diameter: |
1/2" (0.500 in) |
Width: |
1/8" (0.125 in) |
Shielding: |
Single Shielded (one side) |
Material: |
Steel |
Quantity: |
Pair (2 bearings) |
SKU: |
30472 |
Condition: |
Used – Inspected |
Seller Notes: |
Sold as a pair of 2 bearings. One side shielded, one side open. |
Application: |
RC vehicles, robotics, 3D printers, small motors, hobby use |
Bearing Type: |
Deep Groove Radial Ball Bearing |
Number of Rows: |
Single Row |
Condition Notes: |
Used pair of steel miniature ball bearings, 1/4" x 1/2" x 1/8", single shielded. Both inspected and in good condition. Clean and lubricate before use. Sold as a pair of 2. |
