Solopower

SoloPower SP1-70 70W 22V Flexible CIGS Thin Film Solar Panel MC4 Rooftop

(No reviews yet) Write a Review
SKU:
48088
MPN:
SP1-70
Condition:
New
Availability:
Currently out of stock — contact us for availability.
Weight:
8.00 LBS
Shipping:
Calculated at Checkout
  • SoloPower SP1-70 flexible CIGS solar panel curved and standing upright showing full flexible length and MC4 cable leads
  • SoloPower SP1-70 70W flexible thin film solar panel laid flat on floor showing full 86.5-inch length and MC4 connectors at each end
  • SoloPower SP1-70 electrical ratings label showing 70W Pmax, 22.2V Vmp, 3.40A Imp, 30.0V Voc, 4.20A Isc, 7A max series fuse
  • Close-up of SoloPower SP1-70 CIGS thin film solar cell surface showing fine grid line pattern and aluminum edge frame
  • SoloPower SP1-70 flexible solar panel back surface showing white substrate material and curved flexible form
  • Close-up of MC4 connector on SoloPower SP1-70 solar panel cable lead
  • SoloPower SP1-70 junction box showing DANGER label, CE and UL markings, IP65/IP67 rating, and positive terminal marking
  • SoloPower SP1-70 junction box mounted on panel edge showing PV0-B48 rating plate, CE and UL certifications, 1000V and 600V ratings
$80.00
Was: $140.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

SoloPower SP1-70 70W 22V Flexible CIGS Thin Film Solar Panel MC4 Rooftop

The SoloPower SP1-70 is a 70-watt flexible thin film solar panel using CIGS (Copper Indium Gallium Selenide) photovoltaic technology. At just 4.6 lbs and 2.0 mm thick, it rolls up for transport and lies flat against rooftop surfaces without frames or ballast. MC4 connectors are positioned on opposite ends of the panel for straightforward series or parallel wiring into a solar array.

Specifications & What's Included

  • Model: SoloPower SP1-70
  • Cell Technology: CIGS (Copper Indium Gallium Selenide) thin film
  • Maximum Power (Pmax): 70W
  • Max Power Voltage (Vmp): 22.2V
  • Max Power Current (Imp): 3.40A
  • Open Circuit Voltage (Voc): 30.0V
  • Short Circuit Current (Isc): 4.20A
  • Max Series Fuse: 7A
  • Power Tolerance: +5% / -5% at STC
  • Length: 86.5 in (2.197 m / 7.2 ft)
  • Width: 15.7 in (0.398 m / 1.3 ft)
  • Thickness: 0.1 in / 2.0 mm
  • Rolled Diameter: 10–12 inches
  • Roof Load: 0.49 lbs/ft² / 2.4 kg/m²
  • Connectors: MC4, located on opposite ends of the panel
  • Junction Box: IP65/IP67-rated, 1000V / 600V rated (CE, UL marked)
  • Field Wiring: Stranded copper wire, 14–10 AWG, 2.5–6 mm², 90°C min insulation
  • Manufactured: SoloPower facility, San Jose, California
  • Includes: Panel with attached MC4 cable connectors

Applications

CIGS thin film panels like the SP1-70 are used in rooftop solar installations where weight and profile matter — low-slope commercial rooftops, metal standing-seam roofs, and building-integrated photovoltaic (BIPV) applications where a rigid glass panel would be too heavy or structurally impractical. The flexible substrate conforms to curved or uneven surfaces and bonds directly to roofing membranes, eliminating the need for racking hardware. The SP1-70 is also used in off-grid and remote power systems where shipping a lightweight, rollable panel is a practical advantage. SoloPower developed the SP1 series specifically for large commercial rooftop deployments and manufactured these panels in San Jose, California during the early 2010s, a period of significant investment in domestic thin film solar manufacturing.

Condition: Open Box
This SoloPower SP1-70 70W flexible CIGS thin film solar panel is unused and was manufactured at SoloPower's San Jose, California facility. It came directly from their QC department and has been tested to output voltage. Note that most of these panels have writing or markings on them from their use in QC testing — this is normal and does not affect performance. We have had multiple units in stock; the unit you receive may vary slightly from the one photographed but is functionally equivalent. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Data Sheet:
Brand:
SoloPower
Model:
SP1-70
MPN:
SP1-70
Type:
Flexible Thin Film CIGS Solar Panel
SKU:
48088
Seller Notes:
Includes MC4 cable connectors on opposite ends of the panel. Panel only.
Country/Region of Manufacture:
United States
Maximum Power (Pmax):
70W
Max Power Voltage (Vmp):
22.2V
Max Power Current (Imp):
3.40A
Open Circuit Voltage (Voc):
30.0V
Short Circuit Current (Isc):
4.20A
Max Series Fuse:
7A
Power Tolerance:
+5% / -5% at STC
Cell Technology:
CIGS (Copper Indium Gallium Selenide)
Panel Type:
Flexible / Thin Film
Connector Type:
MC4
Length:
86.5 in (2.197 m / 7.2 ft)
Width:
15.7 in (0.398 m / 1.3 ft)
Thickness:
0.1 in / 2.0 mm
Rolled Diameter:
10–12 inches
Roof Load:
0.49 lbs/ft² / 2.4 kg/m²
Form Factor:
Flexible / Rollable
Application:
Rooftop, BIPV, Low-Profile Solar Installation
Condition Notes:
SoloPower SP1-70 70W CIGS solar panel — unused, from SoloPower's San Jose QC dept, tested to output voltage. May have QC writing on surface. Unit received may vary slightly from photo. Contact us with questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose