null
Sharp

Sharp JW-31LMH I/O Link Master Module PLC JW Series Controller

(No reviews yet) Write a Review
SKU:
47769
MPN:
JW-31LMH
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Shipping:
Calculated at Checkout
  • Sharp JW-31LMH I/O Link Master Module – left-side angled view showing front panel with LED indicators and terminal block
  • Sharp JW-31LMH I/O Link Master Module – right-side view showing backplane card-edge connector and side label
  • Sharp JW-31LMH front panel close-up showing model label, NO display, COMM, MODE 3, ERROR, and FAULT LED indicators
  • Sharp JW-31LMH I/O Link Master Module – front view showing terminal block with L1, L2, SHIELD, and FG screw terminals
  • Sharp JW-31LMH – internal PCB view showing main circuit board with multiple ICs and components
  • Sharp JW-31LMH – bottom connector view showing multi-pin backplane card-edge connector
  • Sharp JW-31LMH I/O Link Master Module – opposite side view showing backplane connector and module latch
$85.00
Was: $175.00
Current Stock: 2

Sold Out

Description

Sharp JW-31LMH I/O Link Master Module PLC JW Series Controller

I/O Link master module for Sharp JW Series PLC systems. This card-edge module manages I/O Link communication protocol on compatible industrial control platforms.

Specifications & What's Included

  • Model: JW-31LMH
  • Type: I/O Link Master Module
  • Communication Protocol: I/O Link
  • Compatible With: Sharp JW Series PLC Systems
  • LED Indicators: COMM, MODE 3, ERROR, FAULT
  • Backplane Connector: Multi-pin card-edge connector
  • Manufactured in Japan
  • Module only (no additional components included)

Applications

I/O Link master modules serve as communication interfaces in industrial automation and control systems. This module integrates with Sharp JW Series PLC platforms to enable networked sensor and actuator connectivity. Typical applications include manufacturing facility control, process automation, and machinery management where distributed I/O control is required.

Condition: Used
This Sharp JW-31LMH I/O Link Master Module has been inspected and appears to be in good used condition. The housing is clean with only light surface wear typical of a pulled module. The front panel label, LED indicator window, and terminal block are all intact and undamaged. The backplane card-edge connector looks clean with no bent or corroded pins. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Sharp
Model:
JW-31LMH
MPN:
JW-31LMH
Type:
I/O Link Master Module
SKU:
47769
Compatible With:
Sharp JW Series PLC Systems
Form Factor:
Card/Module
Communication Protocol:
I/O Link
Module Role:
Master
LED Indicators:
COMM, MODE 3, ERROR, FAULT
Backplane Connector:
Multi-pin card-edge connector
Seller Notes:
Module only; inspected and appears in good condition.
Country/Region of Manufacture:
Japan
Condition Notes:
Sharp JW-31LMH I/O Link Master Module inspected and in good used condition. Housing clean with light wear. Front panel, LED window, terminal block, and card-edge connector all intact. Please contact us with any questions.
View AllClose

Related Products

Related Products

Sharp JW-20CM PLC Network Link Module – angled front-left view showing module housing and label Sharp JW-20CM PLC Network Link Module – angled rear-right view showing backplane connector and label
Add to Cart
Quick view

Sharp JW-20CM PLC Network Link Module JW Series Industrial Control

Sharp

$50.00
Was: $100.00
Sharp JW-20CM PLC Network Link Module JW Series Industrial Control This is a network link module designed for Sharp JW Series PLC systems. It provides network communication capabilities for...
47772
SKU:
47772
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
Sharp
Model:
JW-20CM
MPN:
JW-20CM
SKU:
47772
Condition:
Used – Inspected
Seller Notes:
Module only; no cables or accessories included.
Form Factor:
Card / Module
Compatible With:
Sharp JW Series PLC Systems
Country of Manufacture:
Japan
Interface Type:
DB-25 (D-Sub 25-pin)
Application:
PLC Network Communications Link
Status Indicators:
COMM, SD, RD, CD, LT, TEST, ERROR, FAULT (S0–S7)
Link Function:
Network Link Module for JW PLC Series
Station No. Selector:
Rotary station number selector present
Condition Notes:
This Sharp JW-20CM PLC Network Link Module has been visually inspected and shows typical light wear consistent with prior industrial use. The housing is intact and the DB-25 connector appears undamaged. It has not been bench-tested at our facility.
Sharp JW-34NC DC Input Module – left side profile showing PCB interior and module housing Sharp JW-34NC DC Input Module – right side view with specification label showing DC Input Module 12/24VDC ratings
Add to Cart
Quick view

Sharp JW-34NC DC Input Module 12/24VDC 3.5/7.5mA JW Series PLC I/O Card

Sharp

$50.00
Was: $100.00
Sharp JW-34NC DC Input Module 12/24VDC 3.5/7.5mA JW Series PLC I/O Card This is a 32-point DC input module for Sharp JW Series PLC systems. It expands I/O capacity with four groups of 8 input points...
47760
SKU:
47760
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Brand:
Sharp
Model:
JW-34NC
MPN:
JW-34NC
SKU:
47760
Condition:
Used – Inspected
Seller Notes:
Module only — no cables or documentation included.
Form Factor:
Card/Module
Compatible With:
Sharp JW Series PLC Systems
Country of Manufacture:
Japan
Input Voltage:
12/24 VDC
Input Current:
3.5mA (12V) / 7.5mA (24V)
Module Type:
DC Input Module
I/O Points:
32-point (4 groups: A, B, C, D — 8 points each)
Connector Type:
Multi-pin edge connector (rear bus)
Series:
Sharp JW Series
Application:
Programmable Logic Controller (PLC) I/O Expansion
Condition Notes:
This Sharp JW-34NC DC Input Module has been inspected and shows normal cosmetic wear consistent with prior rack installation. The housing is intact with no visible damage. Not bench-tested at our facility.
Sharp JW-10SU Serial Interface Module – right-side angled view showing front panel label and two serial port connectors Sharp JW-10SU Serial I/F Module – left-side view showing backplane label with RS-232C markings and gold edge connector
Add to Cart
Quick view

Sharp JW-10SU Serial I/F Module PLC JW Series 2-Port RS-232C DB25 DB15

Sharp

$85.00
Was: $175.00
Sharp JW-10SU Serial I/F Module PLC JW Series 2-Port RS-232C DB25 DB15The Sharp JW-10SU is a Serial Interface Module designed for use with Sharp's JW Series programmable logic controller (PLC)...
47758
SKU:
47758
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
Sharp
Model:
JW-10SU
MPN:
JW-10SU
Type:
Serial Interface Module
SKU:
47758
Seller Notes:
Module only; no cables or programming software included.
Country/Region of Manufacture:
Japan
Form Factor:
Card/Module
Compatible With:
Sharp JW Series PLC Systems
Interface Type:
RS-232C
Number of Ports:
2
Port 0 Connector:
DB25 (Port 0 / Programmer)
Port 1 Connector:
DB15 (Port 1)
Backplane Interface:
JW Series PLC backplane connector
Condition Notes:
Sharp JW-10SU Serial Interface Module. Inspected, in good used condition. Pulled from a working environment where it was in active use. Housing shows normal wear; both serial ports and backplane connectors intact and undamaged. Module only.
Sharp JW-32S DC Output Module — left-side angled view showing terminal block and module housing Sharp JW-32S PLC output module — right-side angled view showing backplane connector and label
Add to Cart
Quick view

Sharp JW-32S DC Output Module 5/12/24V PLC I/O Card JW Series 1A/PNT 8A/COM

Sharp

$90.00
Was: $175.00
Sharp JW-32S DC Output Module 5/12/24V PLC I/O Card JW Series 1A/PNT 8A/COMDC output module for Sharp JW Series programmable logic controllers. Provides digital output switching capabilities across...
47761
SKU:
47761
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
Sharp
Model:
JW-32S
MPN:
JW-32S
Type:
DC Output Module
SKU:
47761
Output Voltage:
5 VDC / 12 VDC / 24 VDC
Output Current per Point:
1A
Output Current per Common:
8A
Number of Output Points:
32
Output Groups:
4 groups (A, B, C, D)
Fuse Type:
S.U. Fuse
Compatible With:
Sharp JW Series PLC Systems
Form Factor:
Card/Module
Condition:
Used – Pulled from Working Environment
Seller Notes:
Module only; no additional accessories included.
Country/Region of Manufacture:
Japan
Condition Notes:
Sharp JW-32S DC Output Module inspected and in good used condition. Pulled from a working environment where it was in active use. Housing and PCB appear intact with no visible damage. Please contact us with any questions.
Sharp JW-2DA Analog Output PLC Module – right-side angled view showing screw terminal strip and front panel label Sharp JW-2DA PLC Analog Output Module – left-side view showing backplane connector and module label on housing
Add to Cart
Quick view

Sharp JW-2DA Analog Output Module 2-Channel PLC JW Series Screw Terminal

Sharp

$50.00
Was: $100.00
Sharp JW-2DA Analog Output Module 2-Channel PLC JW Series Screw Terminal The Sharp JW-2DA is a 2-channel analog output expansion module designed for use in Sharp JW Series programmable logic...
47767
SKU:
47767
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Brand:
Sharp
Model:
JW-2DA
MPN:
JW-2DA
SKU:
47767
Condition:
Used – Inspected
Seller Notes:
Module only; no external accessories included
Form Factor:
Card / Module
Compatible With:
Sharp JW Series PLC Systems
Country of Manufacture:
Japan
Number of Channels:
2
Output Type:
Analog Output
Connector Type:
Screw Terminal
Adjustment Controls:
Gain and Offset trim per channel (CH.1, CH.2)
Module Type:
Analog Output Expansion Module
Series:
JW Series
Condition Notes:
This Sharp JW-2DA Analog Output PLC Module shows normal wear consistent with prior industrial use. The housing is intact and the screw terminal strip and front-panel trim controls appear undamaged.