Description
Sharp JW-10SU Serial I/F Module PLC JW Series 2-Port RS-232C DB25 DB15
The Sharp JW-10SU is a Serial Interface Module designed for use with Sharp's JW Series programmable logic controller (PLC) systems. It adds two independent RS-232C serial communication ports to a JW Series rack, enabling the PLC to communicate with external devices such as host computers, HMIs, programming terminals, and serial peripherals. Port 0 is labeled as the Programmer port (DB25 connector) and Port 1 provides a secondary RS-232C channel (DB15 connector). The module slots into the JW Series backplane via dual card-edge connectors and is controlled through the PLC's standard rack addressing.
Specifications & What's Included
- Model: Sharp JW-10SU
- Type: Serial Interface (I/F) Module
- Compatible system: Sharp JW Series PLC racks
- Number of serial ports: 2
- Port 0 / Programmer: DB25 female RS-232C connector
- Port 1: DB15 female RS-232C connector
- LED indicators: RUN, WDT, TX0, TX1, RX0, RX1, RTS0, RTS1, CTS0, CTS1, EA0, EA1, EB0, EB1, RUN0, RUN1
- Backplane interface: Dual JW Series card-edge connectors (upper and lower)
- Form factor: JW Series plug-in module (card/module)
- Country of manufacture: Japan
- Included: Module only — no cables, programming software, or manuals
Applications
The Sharp JW Series was a line of modular programmable logic controllers produced by Sharp Corporation for industrial automation and process control applications during the 1980s and 1990s. The JW-10SU Serial Interface Module was used to connect JW Series PLCs to serial host computers, programming consoles, operator interfaces, barcode readers, serial printers, and other RS-232C devices. In a typical installation the Port 0/Programmer connector handled communication with a PC running Sharp's PLC programming software, while Port 1 served as a runtime serial link to an HMI or peripheral device. The JW Series was deployed in a wide range of manufacturing, assembly, and machine control environments. Maintenance technicians and system integrators working on legacy Sharp JW PLC installations continue to seek these modules as direct replacements for field units.
This Sharp JW-10SU Serial Interface Module has been inspected and is in good used condition. It was pulled from a working environment where it was in active use. The housing shows normal wear consistent with industrial service — light scuffing on the beige plastic panels — but the module is intact with no cracks, broken tabs, or damaged connectors. Both serial ports (DB25 Port 0/Programmer and DB15 Port 1) appear clean and undamaged. The backplane edge connectors look clean. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Sharp |
Model: |
JW-10SU |
MPN: |
JW-10SU |
Type: |
Serial Interface Module |
SKU: |
47758 |
Seller Notes: |
Module only; no cables or programming software included. |
Country/Region of Manufacture: |
Japan |
Form Factor: |
Card/Module |
Compatible With: |
Sharp JW Series PLC Systems |
Interface Type: |
RS-232C |
Number of Ports: |
2 |
Port 0 Connector: |
DB25 (Port 0 / Programmer) |
Port 1 Connector: |
DB15 (Port 1) |
Backplane Interface: |
JW Series PLC backplane connector |
Condition Notes: |
Sharp JW-10SU Serial Interface Module. Inspected, in good used condition. Pulled from a working environment where it was in active use. Housing shows normal wear; both serial ports and backplane connectors intact and undamaged. Module only. |
