Description
SEH America 100mm Polished Silicon Wafers N/PHOS 500-550μm 320-480Ω-cm 1-1-1 Qty 10
This listing is for a lot of 10 SEH America 100mm (4-inch) polished silicon wafers, stored in a clear plastic wafer carrier. The wafers are N-type, phosphorus-doped (N/PHOS), with a <111> crystal orientation. SEH America (Shin-Etsu Handotai America) is one of the world's leading manufacturers of silicon wafers for the semiconductor industry, and these wafers are manufactured in Japan to tight specification tolerances.
Specifications & What's Included
- Manufacturer: SEH America (Shin-Etsu Handotai America)
- Part Number: 4103-06-075 REV. R4
- Wafer Diameter: 100mm (4 inch)
- Wafer Type: N/PHOS (N-type, Phosphorus doped)
- Surface Finish: Single-side polished
- Thickness: 500–550 μm
- Resistivity: 320–480 Ω-cm
- Crystal Orientation: <111>
- Country of Manufacture: Japan
- Quantity: 10 wafers
- Included: 10 polished silicon wafers in clear plastic wafer carrier/holder
Applications
100mm polished silicon wafers are a foundational substrate material in semiconductor device fabrication, research, and materials science. N-type phosphorus-doped wafers with <111> orientation are commonly used in epitaxial layer growth, power device fabrication, MEMS (Micro-Electro-Mechanical Systems) research, and photovoltaic cell development. The <111> crystal orientation is specifically suited to applications where this cleavage plane is required for device geometry or epitaxial compatibility, including bipolar transistor and certain MOSFET process flows. These wafers are also used extensively in university and R&D lab settings for thin-film deposition experiments, lithography process development, and surface science studies. SEH (Shin-Etsu Handotai) has been a primary supplier to the global semiconductor industry since the 1960s, and their 100mm wafers remain in active use at facilities running legacy process nodes as well as in research and prototyping environments where 4-inch tooling is still standard.
This lot of SEH America 100mm N/PHOS polished silicon wafers has been inspected and appears to be in good condition. All 10 wafers are present in the plastic wafer carrier/holder as shown. The wafers show the expected dark polished surface typical of N-type silicon and show no visible chips, cracks, or major contamination in the photos. Minor handling marks or light surface haze consistent with prior use may be present. These were pulled from a working lab or semiconductor environment. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
SEH America |
Model: |
100mm N/PHOS Polished Silicon Wafer |
MPN: |
4103-06-075 REV. R4 |
Type: |
Polished Silicon Wafer |
SKU: |
53133 |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Lot of 10 polished silicon wafers in plastic wafer carrier/holder |
Country/Region of Manufacture: |
Japan |
Wafer Diameter: |
100mm (4 inch) |
Wafer Type: |
N/PHOS (N-type, Phosphorus doped) |
Thickness: |
500-550 μm |
Resistivity: |
320-480 Ω-cm |
Crystal Orientation: |
<111> |
Dopant: |
Phosphorus (PHOS) |
Conductivity Type: |
N-Type |
Surface Finish: |
Polished |
Quantity: |
10 |
Lot / Package: |
10 wafers in plastic wafer carrier |
Application: |
Semiconductor research, device fabrication, epitaxy |
Form Factor: |
150mm round wafer (4-inch) |
Condition Notes: |
SEH America 100mm N/PHOS polished silicon wafers, lot of 10. Inspected and in good condition; all wafers present in carrier. No visible chips or cracks. Pulled from a working semiconductor environment. |