RF Intertronics

RF Interonics RF2910 Bay Filter Assembly 2x6A 2x10A 115VAC 60CPS EMI Filter

(No reviews yet) Write a Review
SKU:
9214
MPN:
RF2910
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
64.00 LBS
Shipping:
Calculated at Checkout
  • RF Interonics RF2910 Bay Filter Assembly – top view showing black steel enclosure with wired leads
  • RF Interonics RF2910 Bay Filter Assembly – rear panel view with two wired lead pass-through holes
  • RF Interonics RF2910 Bay Filter Assembly – side view showing SMA-style port and ventilation hole
  • RF Interonics RF2910 rating plate closeup – RF2910, 2x6A 115VAC 60CPS, 2x10A 115VAC 60CPS, Bay Shore NY
  • RF Interonics RF2910 Bay Filter Assembly – top and front view showing 6 AMP and 10 AMP labeled terminals
  • RF Interonics RF2910 Bay Filter Assembly – front filter slot view showing 6A and 10A filter bays with wired leads
$50.00
Was: $100.00
Current Stock: 1

Sold Out

Description

RF Interonics RF2910 Bay Filter Assembly 2x6A 2x10A 115VAC 60CPS EMI Filter

This is a four-section EMI power line filter assembly housed in a steel enclosure with panel-mount flanges. It provides electromagnetic interference filtering for 115VAC, 60Hz industrial and telecom equipment.

Specifications & What's Included

  • Model: RF2910
  • Manufacturer: RF Interonics, Bay Shore, New York
  • Voltage Rating: 115VAC, 60Hz
  • Four Filter Sections: 2x6A and 2x10A ratings
  • Enclosure: Black painted steel with panel-mount flanges
  • Connections: Wired leads (green/white/bare wire)
  • Unit only; no accessories included

Applications

Bay Filter assemblies were standard in telecom and industrial control systems for conditioning AC power and reducing EMI noise on 115VAC supply lines. These filters are commonly found in telecommunications cabinets, rack-mount power distribution systems, and industrial equipment requiring clean power for sensitive circuits and instrumentation.

Condition: Used
This RF Interonics RF2910 Bay Filter Assembly has been visually inspected and appears to be in good used condition. The steel enclosure shows surface scuffing, paint wear, and general age-related cosmetic wear consistent with prior service use. The wired leads are intact and visible on the rear and side. The rating plate is clean and fully legible. This unit has not been powered or functionally tested at our facility. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
RF Interonics
Model:
RF2910
MPN:
RF2910
Type:
Bay Filter Assembly / EMI Power Line Filter
SKU:
9214
Voltage Rating:
115VAC
Frequency:
60 CPS (60 Hz)
Filter Section 1:
2x6A (6 Amp), 115VAC, 60CPS
Filter Section 2:
2x10A (10 Amp), 115VAC, 60CPS
Number of Filter Sections:
4 (2x6A + 2x10A)
Enclosure:
Steel box enclosure, black painted, panel-mount flanges
Connections:
Wired leads (green/white/bare wire)
Country/Region of Manufacture:
United States
Manufacturer Location:
Bay Shore, New York
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit only; no additional accessories included.
Condition Notes:
RF Interonics RF2910 Bay Filter Assembly in good used cosmetic condition. Shows surface scuffing and paint wear. Wired leads intact. Not powered or functionally tested at our facility. Sold as-is/used surplus.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Schaffner FN2070-10-06 10A EMI line filter – left-side three-quarter view showing label and quick-connect terminals Schaffner FN2070-10-06 EMI filter – right-side three-quarter view showing opposite end terminals and label
Add to Cart
Quick view

Schaffner FN2070-10-06 10A EMI Line Filter 110/250VAC 50-60Hz IEC960 Single

Schaffner

$28.00
Was: $60.00
Schaffner FN2070-10-06 10A EMI Line Filter 110/250VAC 50-60Hz IEC960 Single PhaseSingle-phase EMI line filter designed to suppress electromagnetic interference on AC power lines. Features a 2-stage...
46000
SKU:
46000
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
Schaffner
Model:
FN2070-10-06
MPN:
FN2070-10-06
Type:
Single-Phase EMI Line Filter
SKU:
46000
Voltage Rating:
110/250VAC
Current Rating:
10A
Frequency:
50-60Hz
Operating Temperature:
10A @ 40°C / -25°C to +85°C
Phase:
Single Phase
Standards Compliance:
IEC960 Compatible
Certifications:
UL, CE
Topology:
2-stage LC filter with common-mode chokes
Inductance:
2x4.5mH (line/neutral)
Capacitance:
1uF x2 (line-side), 1uF x2 (load-side), 2x4.7nF (Y-cap)
Leakage Resistance:
220kOhm
Connector Type:
Faston / Quick-Connect Blade Terminals
Country/Region of Manufacture:
Switzerland
Form Factor:
Chassis Mount / Panel Mount
Seller Notes:
Filter only; no mounting hardware included.
Condition Notes:
Schaffner FN2070-10-06 10A EMI line filter in good used condition. Pulled from a working environment. Housing shows light surface wear. Terminals are clean and intact. No damage noted.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Corcom 3ET3 EMI power line filter – angled front-left view showing metal housing and hardwired leads with Molex connector Corcom 3ET3 EMI power line filter – angled rear-right view showing full lead set including blue, brown, and green/yellow wires
Add to Cart
Quick view

Corcom 3ET3 EMI Power Line Filter 250VAC 3A 50/60Hz Hardwired RFI Suppressor

Corcom

$14.00
Was: $30.00
Corcom 3ET3 EMI Power Line Filter 250VAC 3A 50/60Hz Hardwired RFI SuppressorL-C Pi network power line filter designed to suppress electromagnetic interference and radio frequency noise on AC mains...
46656
SKU:
46656
Availability:
Usually ships within 1-2 business days.
Weight:
1.00 LBS
Brand:
Corcom
Model:
3ET3
MPN:
3ET3
Type:
EMI / RFI Power Line Filter
SKU:
46656
Rated Voltage:
250 VAC
Rated Current:
3A
Operating Frequency:
50/60 Hz
Wiring / Termination:
Hardwired leads with Molex-style connector and spade terminals
Filter Topology:
L-C Pi network (inductors + capacitors)
Inductance:
2 x 36.3 mH
Capacitance:
2 x 0.47 uF (X2), 2 x 0.004 uF (Y)
Damping Resistor:
330K Ohms
Country/Region of Manufacture:
Mexico
Certifications:
UL, CSA, VDE (per label markings)
Form Factor:
Inline / Chassis-mount
Condition:
Used – Inspected
Seller Notes:
Hardwired unit with Molex-style input connector and spade output terminals.
Condition Notes:
Corcom 3ET3 EMI Power Line Filter, used and inspected. Metal housing intact with light surface marks from prior use. All leads intact; Molex connector and spade terminals present and in good shape.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Hua Yeang HUA-9010-1610/16A 3-Phase High Current Line Filter – front-left angled view showing stainless steel enclosure and label Hua Yeang HUA-9010-1610/16A Line Filter – rear-left angled view showing rating label and date code sticker
Add to Cart
Quick view

Hua Yeang HUA-9010-1610/16A 16A 440V 3-Phase High Current Line Filter 50/60Hz

Hua Yeang

$136.00
Was: $450.00
Hua Yeang HUA-9010-1610/16A 16A 440V 3-Phase High Current Line Filter 50/60Hz Three-phase EMI/EMC line filter rated for 16A at 440VAC, 50/60Hz operation. Suppresses electromagnetic interference on...
47053
SKU:
47053
Availability:
Usually ships within 1-2 business days.
Weight:
6.00 LBS
Brand:
Hua Yeang
Model:
HUA-9010-1610/16A
MPN:
HUA-9010-1610/16A
Type:
High Current 3-Phase EMI/EMC Line Filter
SKU:
47053
Voltage Rating:
440VAC
Current Rating:
16A
Phase:
Three Phase
Frequency:
50/60 Hz
Max Ambient Temperature:
40°C
Standards Compliance:
IEC 950
Certifications:
CE
Enclosure Material:
Stainless Steel
Connection Type:
Screw Terminal / Stud
Number of Phases:
3
Earth Torque Spec:
3.9 Nm (do not unscrew lock-nut)
I/O Connections Torque:
1.7 Nm
Min. Wire Size:
10 mm²
Date Code:
25/10/2001
Seller Notes:
Unit only. Inspected and pulled from a working environment.
Country/Region of Manufacture:
Taiwan
Condition:
Used – Pulled from Working Environment
Condition Notes:
This Hua Yeang HUA-9010-1610/16A High Current 3-Phase Line Filter has been inspected and is in good used condition. It was pulled from a working environment where it was previously in service.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov