Description
Power Tronic PK-6180DT3 180W ATX Switching Power Supply 100-240V 20-Pin
The Power Tronic PK-6180DT3 is a 180W ATX switching power supply built by Powertech Electronic Co., Ltd. of Taiwan. It accepts universal AC input (100–240V, 47–63Hz) and delivers multiple regulated DC voltage rails through a standard 20-pin ATX connector and peripheral harnesses, making it a direct-fit replacement for legacy ATX desktop systems.
Specifications & What's Included
- Model: PK-6180DT3 (Powertech Electronic Co., Ltd.)
- Maximum output power: 180W
- Form factor: ATX
- AC input: 100V / 120V / 200V / 240V (universal), 5A / 2.5A
- Input frequency: 47–63Hz
- Output +3.3V: 0.3A min, 14A max
- Output +5V: 2A min, 22A max (125W combined +3.3V/+5V max)
- Output +12V: 0A min, 6A max
- Output -5V: 0A min, 0.5A max
- Output -12V: 0A min, 0.8A max
- Output +5VSB (standby): 0A min, 0.1A max
- Main power connector: 20-pin ATX
- Peripheral connectors: multiple 4-pin Molex, floppy power
- Cooling: 80mm top-mounted fan
- Certifications: UL, N (CSA), SB Level 3
- Country of manufacture: Taiwan
- Includes: all attached output harnesses
Applications
ATX power supplies in the 180W range were widely used in desktop computers and compact industrial systems from the late 1990s through the mid-2000s — the Pentium II, Pentium III, and early Pentium 4 era. The 20-pin ATX connector and relatively modest power output are characteristic of that generation, before 24-pin connectors and higher-wattage demands became standard with dual-core processors and dedicated graphics cards. These units remain useful today for maintaining, refurbishing, or restoring legacy desktop hardware, older workstations, thin clients, and small form-factor industrial PCs that cannot accept higher-wattage modern supplies. The universal 100–240V input makes them compatible with both North American and international equipment.
This Power Tronic PK-6180DT3 180W ATX Switching Power Supply has been bench-tested at our facility and is in good working order. The steel chassis shows light surface wear consistent with prior installation — normal for a used unit of this type. All output harnesses are intact, the 80mm cooling fan is present and undamaged, and the IEC AC inlet and power switch are in good condition. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Power Tronic |
Model: |
PK-6180DT3 |
MPN: |
PK-6180DT3 |
Type: |
ATX Switching Power Supply |
SKU: |
17003 |
Maximum Power Output: |
180W |
Form Factor: |
ATX |
Input Voltage: |
100V / 120V / 200V / 240V AC |
Input Current: |
5A / 2.5A |
Frequency: |
47-63Hz |
Output +3.3V: |
+3.3V: 0.3A min, 14A max |
Output +5V: |
+5V: 2A min, 22A max (125W combined max) |
Output +12V: |
+12V: 0A min, 6A max |
Output -5V: |
-5V: 0A min, 0.5A max |
Output -12V: |
-12V: 0A min, 0.8A max |
Output +5VSB: |
+5VSB: 0A min, 0.1A max |
Main Power Connector: |
20-pin ATX |
Peripheral Connectors: |
Multiple 4-pin Molex, floppy power |
Cooling: |
80mm fan (top-mounted) |
Modular: |
No |
Manufacturer: |
Powertech Electronic Co., Ltd. |
Certifications: |
UL, N, SB Level 3 |
Seller Notes: |
Includes all attached output harnesses. No mounting screws or external cables included. |
Country/Region of Manufacture: |
Taiwan |
Condition Notes: |
Power Tronic PK-6180DT3 180W ATX power supply. Bench-tested at our facility and in good working order. Light surface wear on steel chassis. All output harnesses intact, fan present. Please view photos and contact us with questions. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |