Pomona Electronics

Pomona Electronics Band Pass Filter 0.936 MHz 936 kHz BNC In/Out Bench RF

(No reviews yet) Write a Review
SKU:
32976
MPN:
936 kHz
Condition:
Used
Availability:
Currently out of stock — contact us for availability.
Weight:
3.00 LBS
Shipping:
Calculated at Checkout
  • Pomona Electronics 0.936 MHz band pass filter – three-quarter front/top view showing BNC IN and OUT connectors, ON/OFF toggle switch, and tuning knob on teal aluminum chassis
  • Pomona Electronics 0.936 MHz band pass filter – rear/bottom view of teal aluminum enclosure showing mounting flanges and sealed housing
  • Pomona Electronics 0.936 MHz band pass filter – front panel close-up showing '.936 MHZ' label, ON toggle switch, large tuning knob, and BNC IN and OUT connectors with calibration sticker on left side
$35.80
Was: $68.00

This item is temporarily unavailable. Please view our recommended, in-stock alternatives directly below.

Description

Pomona Electronics Band Pass Filter 0.936 MHz 936 kHz BNC In/Out Bench RF

This Pomona Electronics band pass filter is a passive RF filter designed to pass a narrow band of frequencies centered at 0.936 MHz (936 kHz) while attenuating signals outside that range. It features BNC input and output connectors, an ON/OFF toggle switch, and an accessible tuning knob, all housed in a compact painted aluminum chassis with mounting flanges for bench or panel use.

Specifications & What's Included

  • Brand: Pomona Electronics
  • Filter Type: Band Pass Filter
  • Center Frequency: 0.936 MHz (936 kHz)
  • Peak Frequency: 924 kHz
  • Insertion Loss: 28.4 dB
  • −3 dB Bandwidth Limits: 914 kHz – 967 kHz
  • −20 dB Bandwidth Limits: 886 kHz – 1004 kHz
  • Input Connector: BNC (labeled IN)
  • Output Connector: BNC (labeled OUT)
  • ON/OFF Toggle Switch on front panel
  • Tuning/adjustment knob on front panel
  • Enclosure: Painted aluminum chassis with integral mounting flanges
  • Form Factor: Compact benchtop/desktop module
  • Calibration sticker present on left side panel

Applications

Band pass filters like this Pomona unit are used in RF test benches, signal analysis setups, and communications lab environments to isolate a specific frequency band and reject unwanted out-of-band signals. At 936 kHz, this filter falls squarely in the AM broadcast band (530–1700 kHz), making it useful for AM receiver testing, IF chain characterization, antenna selectivity measurements, and interference rejection experiments. Pomona Electronics has long been a supplier of passive RF and test accessories — BNC-connected passive filters of this type are standard bench tools for RF engineers evaluating receiver sensitivity, selectivity, and adjacent-channel rejection. The compact flanged chassis allows the unit to be bolted to a panel or used freestanding on a bench.

Condition: Used
This Pomona Electronics 0.936 MHz Band Pass Filter has been inspected and is in good used condition. The chassis, BNC connectors, toggle switch, and tuning knob all appear intact with normal cosmetic wear consistent with prior bench use. A calibration sticker is visible on the left side panel. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Pomona Electronics
Model:
Band Pass Filter 0.936 MHz
MPN:
0.936 MHz Band Pass Filter
Type:
Band Pass Filter
SKU:
32976
Center Frequency:
0.936 MHz (936 kHz)
Peak Frequency:
924 kHz
Insertion Loss:
28.4 dB
-3 dB Limits:
914 kHz – 967 kHz
-20 dB Limits:
886 kHz – 1004 kHz
Connector Type:
BNC
Number of Ports:
2 (IN and OUT)
Form Factor:
Benchtop / Desktop Module
Enclosure:
Painted aluminum chassis with mounting flanges
Country/Region of Manufacture:
United States
Condition Notes:
This Pomona Electronics 0.936 MHz Band Pass Filter has been inspected and is in good used condition. Chassis and BNC connectors appear intact with normal wear. Calibration sticker visible on side panel.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Pomona Electronics F-033 1.25 MHz Band Pass Filter — angled top view showing BNC IN and OUT connectors, toggle switch, and tuning knob on teal metal enclosure Pomona Electronics F-033 1.25 MHz Band Pass Filter — front panel view showing ON toggle switch, 1.25 MHZ label, tuning knob, and BNC IN/OUT connectors with F-033 designation
Add to Cart
Quick view

Pomona Electronics 1.25 MHz Band Pass Filter BNC In/Out F-033 RF Signal

Pomona Electronics

$75.00
Was: $150.00
Pomona Electronics 1.25 MHz Band Pass Filter BNC In/Out F-033 RF SignalBenchtop band pass filter designed to isolate and pass RF signals at 1.25 MHz while attenuating out-of-band frequencies...
32970
SKU:
32970
Availability:
Usually ships within 1–2 business days.
Weight:
3.00 LBS
Brand:
Pomona Electronics
Model:
F-033
MPN:
F-033
Type:
Band Pass Filter
SKU:
32970
Center Frequency:
1.25 MHz (peak at 1.265 MHz)
Insertion Loss:
21.8 dB
-3 dB Bandwidth:
1.24 MHz to 1.28 MHz
-20 dB Limits:
1.18 MHz to 1.36 MHz
Connector Type:
BNC (IN and OUT)
Number of Ports:
2 (1x IN, 1x OUT)
Form Factor:
Benchtop / Panel-Mount Box
On/Off Switch:
Yes — toggle switch on front panel
Enclosure:
Metal box with mounting flanges
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Unit only — no additional accessories included
Condition Notes:
Pomona Electronics F-033 1.25 MHz Band Pass Filter. Inspected and in good condition. Metal enclosure shows light surface wear; BNC connectors and toggle switch appear clean and undamaged.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Pomona Electronics 3.75 MHz band pass filter – front-left angled view showing BNC IN and OUT connectors, black rotary volume control knob, ON toggle switch, and Scope-Teka calibration sticker on teal aluminum mountable enclosure Pomona Electronics 3.75 MHz band pass filter – rear/side view showing smooth teal anodized aluminum enclosure with mounting flanges
Add to Cart
Quick view

Pomona Electronics 3.75 MHz Band Pass Filter Mountable BNC In/Out 20dB

Pomona Electronics

$75.00
Was: $150.00
Pomona Electronics 3.75 MHz Band Pass Filter Mountable BNC In/Out 20dBThis Pomona Electronics band pass filter is centered at 3.75 MHz and is housed in a compact, mountable aluminum enclosure. It...
32973
SKU:
32973
Availability:
Usually ships within 1–2 business days.
Weight:
3.00 LBS
Brand:
Pomona Electronics
Model:
3.75 MHz Band Pass Filter
Type:
Band Pass Filter
Center Frequency:
3.75 MHz (peaks at 3.79 MHz)
Insertion Loss:
20.2 dB
Q Factor:
26.6
-3 dB Bandwidth:
3.716 MHz to 3.858 MHz
-20 dB Limits:
3.53 MHz to 4.09 MHz
Attenuation Range:
Additional 15 dB via volume control
Connector Type:
BNC (IN and OUT)
Form Factor:
Mountable enclosure with mounting flanges
Calibrated By:
Scope-Teka
SKU:
32973
Condition:
Used – Inspected, good condition
Seller Notes:
Calibration sticker present (Scope-Teka). Unit only — no accessories included.
Condition Notes:
Pomona Electronics 3.75 MHz band pass filter. Inspected and in good used condition. Enclosure intact with light surface wear. BNC connectors and rotary control present and undamaged. Scope-Teka calibration sticker on front panel.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
9.0 MHz 5-Pole Bessel low pass filter in blue metal enclosure – three-quarter front view showing BNC output connector and mounting flanges 9.0 MHz Bessel low pass filter – IN end panel with BNC input connector and mounting holes
Add to Cart
Quick view

9.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal

Bessel

$28.00
Was: $60.00
9.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalBenchtop low pass filter designed to attenuate high-frequency signals above 9.0 MHz while preserving lower frequencies...
33020
SKU:
33020
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Brand:
Unbranded
Model:
9.0 MHz 5-Pole Bessel Low Pass Filter
MPN:
15
Type:
Bessel Low Pass Filter
SKU:
33020
Condition:
Used – Inspected
Seller Notes:
Unit only; no cables or accessories included.
Form Factor:
Enclosed / Benchtop
Filter Type:
Bessel Low Pass
Number of Poles:
5
Cutoff Frequency:
9.0 MHz
Impedance:
50 Ohms
Connector Type:
BNC
Input Connector:
BNC
Output Connector:
BNC
Frequency Range:
Low Pass, cutoff 9.0 MHz
Enclosure Material:
Metal (painted steel/aluminum)
Application:
RF Signal Conditioning, Test & Measurement
Condition Notes:
9.0 MHz 5-Pole Bessel Low Pass Filter inspected and in good used condition. Metal enclosure shows light surface wear; BNC connectors clean and undamaged. Spec label intact and legible.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov