Koganei

Koganei CS-TBDA16x100 Pneumatic Double Air Cylinder 16mm Bore 100mm Stroke

(No reviews yet) Write a Review
SKU:
47968
MPN:
CS-TBDA16x100
Condition:
Used
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
  • Koganei CS-TBDA16x100 pneumatic double air cylinder – top/front view showing body, push-in fittings, and sensor wiring leads
  • Koganei CS-TBDA16x100 pneumatic cylinder – angled three-quarter view showing aluminum body, fittings, and integrated sensor leads
  • Koganei CS-TBDA16x100 air cylinder – close-up of label showing model number CS-TBDA16x100, 'AIR CYLINDER', and 'MADE IN JAPAN'
  • Koganei CS-TBDA16x100 pneumatic cylinder – end view showing dual cylinder bore openings and push-in port fitting
  • Koganei CS-TBDA16x100 pneumatic cylinder – side/bottom view showing port connections, mounting screws, and elbow fitting
$40.00
Was: $80.00
Current Stock: 1

Sold Out

Description

Koganei CS-TBDA16x100 Pneumatic Double Air Cylinder 16mm Bore 100mm Stroke

Double-acting pneumatic cylinder with 16mm bore and 100mm stroke. Operates on compressed air to produce linear motion in both directions, used in automation and industrial machinery.

Specifications & What's Included

  • Bore Diameter: 16 mm
  • Stroke Length: 100 mm
  • Type: Double-Acting Pneumatic Cylinder
  • Body Material: Aluminum
  • Port Type: Push-In Fittings
  • Includes pneumatic push-in fittings and sensor wiring leads
  • Manufacturer: Koganei (Japan)

Applications

Double-acting cylinders are standard components in pneumatic automation systems, assembly lines, and industrial machinery. This compact tandem-body unit is used in clamping, lifting, pressing, and positioning applications across manufacturing equipment. The push-in fittings allow quick connection to standard pneumatic valve manifolds and tubing networks common in factory automation and control systems.

Condition: Used
This Koganei CS-TBDA16x100 pneumatic double air cylinder has been inspected and is in good used condition. It was pulled from a working environment where it was actively in use. The aluminum body shows light surface wear and scuffing consistent with normal industrial service. The push-in fittings and sensor wiring leads are present and intact. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Koganei
Model:
CS-TBDA16x100
MPN:
CS-TBDA16x100
Type:
Pneumatic Double-Acting Air Cylinder
SKU:
47968
Bore Diameter:
16 mm
Stroke Length:
100 mm
Actuator Type:
Double Acting
Actuation Method:
Pneumatic
Body Material:
Aluminum
Port Type:
Push-In Fittings
Country/Region of Manufacture:
Japan
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes attached pneumatic push-in fittings and sensor wiring leads.
Form Factor:
Compact / Tandem Body
Condition Notes:
Koganei CS-TBDA16x100 pneumatic double air cylinder. Used, inspected, good condition. Pulled from a working environment where it was in active use. Push-in fittings and sensor leads present. Normal surface wear.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Koganei CS-TBDA16x30 double acting air cylinder – left side view showing push-in fittings and pneumatic tubing Koganei CS-TBDA16x30 pneumatic cylinder – right side view showing twin bore body and fittings with tubing
Add to Cart
Quick view

Koganei CS-TBDA16x30 Double Acting Air Cylinder 16mm Bore 30mm Stroke Japan

Koganei

$40.00
Was: $80.00
Koganei CS-TBDA16x30 Double Acting Air Cylinder 16mm Bore 30mm Stroke JapanThe Koganei CS-TBDA16x30 is a compact double acting pneumatic linear cylinder with a twin bore configuration, featuring a 16...
48145
SKU:
48145
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
Koganei
Model:
CS-TBDA16x30
MPN:
CS-TBDA16x30
Type:
Double Acting Pneumatic Air Cylinder
SKU:
48145
Bore Diameter:
16 mm
Stroke Length:
30 mm
Cylinder Action:
Double Acting
Bore Configuration:
Twin Bore
Actuator Type:
Linear Pneumatic Actuator
Port / Fitting Type:
Push-in pneumatic fittings
Country/Region of Manufacture:
Japan
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Includes attached push-in pneumatic fittings and tubing as shown
Body Material:
Aluminum
Application:
Industrial automation, semiconductor, precision machinery
Compatible With:
Koganei CS-TBDA series pneumatic systems
Condition Notes:
Koganei CS-TBDA16x30 double acting air cylinder inspected and in good used condition. Aluminum body shows minor surface wear. Push-in fittings and tubing included as shown. Please contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Pneumatic linear slide cylinder with aluminum push block and blue push-in fittings — front-left isometric view Pneumatic linear slide cylinder rear isometric view showing dual guide rods and black push block
Add to Cart
Quick view

Pneumatic Linear Slide Cylinder Aluminum Push Block 20mm Stroke 16mm Rod Dual

Unbranded

$28.00
Was: $60.00
Pneumatic Linear Slide Cylinder Aluminum Push Block 20mm Stroke 16mm Rod Dual GuideThis is an unbranded pneumatic linear slide cylinder assembly with an aluminum push block, dual external guide rods,...
48738
SKU:
48738
Availability:
Usually ships within 1-2 business days.
Weight:
5.00 LBS
Brand:
Unbranded
Model:
Pneumatic Linear Slide Cylinder
Type:
Guided Pneumatic Linear Cylinder / Slide Unit
SKU:
48738
Stroke Length:
20mm
Rod Diameter:
16mm
Push Block Dimensions:
95mm x 35mm x 15mm
Body Dimensions:
115mm x 98mm x 38mm
Push Block Material:
Aluminum
Body Material:
Aluminum
Guide Type:
Dual round guide rods
Fitting Type:
Push-in pneumatic fittings (blue)
Actuator Type:
Double-acting pneumatic linear actuator
Form Factor:
Compact block-body with external guide rods
Condition:
Used – Pulled from Working Environment
Seller Notes:
Unit only — no additional accessories included
Condition Notes:
Pneumatic linear slide cylinder with push block pulled from a working environment. Inspected and in good used condition. Aluminum body shows typical industrial wear. Fittings and guide rods intact.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
SMC CDM2B20-150 double acting pneumatic cylinder full side view with position sensor leads and speed controller fitting SMC CDM2B20-150 cylinder label showing model number, max pressure 1.0 MPa, 10.2 kgf/cm², 145 PSI, Made in Japan
Add to Cart
Quick view

SMC CDM2B20-150 Pneumatic Cylinder 20mm Bore 150mm Stroke Double Acting

SMC

$35.00
Was: $70.00
SMC CDM2B20-150 Pneumatic Cylinder 20mm Bore 150mm Stroke Double ActingDouble acting pneumatic cylinder with 20mm bore and 150mm stroke. Operates on compressed air at up to 1.0 MPa and is designed...
47965
SKU:
47965
Availability:
Usually ships within 1-2 business days.
Weight:
2.00 LBS
Brand:
SMC
Model:
CDM2B20-150
MPN:
CDM2B20-150
Type:
Double Acting Pneumatic Cylinder
SKU:
47965
Bore Diameter:
20mm
Stroke Length:
150mm
Rod Diameter:
8mm
Max Pressure:
1.0 MPa / 10.2 kgf/cm² / 145 PSI
Action Type:
Double Acting
Rod Configuration:
Single Rod
Series:
CDM2B
Country/Region of Manufacture:
Japan
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Includes attached speed controller fittings and position sensor leads
Compatible With:
SMC CDM2 series pneumatic automation systems
Form Factor:
Round Body / Inline
Medium:
Compressed Air / Pneumatic
Condition Notes:
SMC CDM2B20-150 pneumatic cylinder inspected and in good used condition. Stainless body is clean, rod and fittings intact, speed controller fittings and sensor leads present. Normal light handling marks. Please contact us with any questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
SMC CDM2B40-85 CM2 Series double acting pneumatic cylinder full assembly with THK rod end joints on both ends – left side view SMC CDM2B40-85 CM2 pneumatic cylinder full assembly showing stainless body and flow control fittings – right side view
Add to Cart
Quick view

SMC CDM2B40-85 CM2 Series Double Acting Pneumatic Cylinder 40mm Bore 85mm

SMC

$45.00
Was: $90.00
SMC CDM2B40-85 CM2 Series Double Acting Pneumatic Cylinder 40mm Bore 85mmDouble acting single rod pneumatic cylinder manufactured by SMC. Converts compressed air pressure into linear motion in both...
48734
SKU:
48734
Availability:
Usually ships within 1-2 business days.
Weight:
4.00 LBS
Brand:
SMC
Model:
CDM2B40-85
MPN:
CDM2B40-85+10-H-7BL3-XB9C10
Secondary Model:
7BL3-XB9C10
Type:
Double Acting Single Rod Pneumatic Cylinder
Series:
CM2
SKU:
48734
Bore Diameter:
40mm
Stroke Length:
85mm + 10mm (95mm total)
Rod Diameter:
9mm
Max Pressure:
1.0 MPa / 10.2 kgf/cm² / 145 PSI
Action Type:
Double Acting
Rod Configuration:
Single Rod
Included Accessories:
THK rod end joints (both ends), flow control fittings
Country/Region of Manufacture:
Japan
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes THK rod end joints on both ends and inline flow control fittings
Condition Notes:
This SMC CDM2B40-85 CM2 Series double acting pneumatic cylinder was pulled from a working environment and inspected. Body shows light surface soiling and minor wear. Both THK rod ends intact, flow control fittings present.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
SMC CDQ2B63-75DMZ-A93 compact pneumatic cylinder – front angled view showing rod end and body SMC CDQ2B63-75DMZ-A93 compact pneumatic cylinder – rear angled view showing aluminum body and through-hole mounting corners
Add to Cart
Quick view

SMC CDQ2B63-75DMZ-A93 Compact Pneumatic Cylinder 63mm Bore 75mm Stroke 1.0MPa

SMC

$75.00
Was: $150.00
SMC CDQ2B63-75DMZ-A93 Compact Pneumatic Cylinder 63mm Bore 75mm Stroke 1.0MPaDouble-acting pneumatic cylinder with 63mm bore and 75mm stroke length. Operates at 1.0 MPa maximum pressure and delivers...
48095
SKU:
48095
Availability:
Usually ships within 1-2 business days.
Weight:
5.00 LBS
Brand:
SMC
Model:
CDQ2B63-75DMZ-A93
MPN:
CDQ2B63-75DMZ-A93
Secondary Model:
CDQ2B63-75DMZ
Type:
Compact Double-Acting Pneumatic Cylinder
SKU:
48095
Series:
CDQ2B
Bore Size:
63 mm
Stroke Length:
75 mm
Action Type:
Double Acting
Rod Type:
Single Rod
Mounting Style:
Through-Hole
Max Operating Pressure:
1.0 MPa
Body Material:
Aluminum
Condition:
Used – Inspected and Tested
Seller Notes:
Cylinder only; tested and in working order.
Country/Region of Manufacture:
China
Form Factor:
Compact / Short Stroke
Condition Notes:
SMC CDQ2B63-75DMZ-A93 compact pneumatic cylinder tested and in working order. Aluminum body shows light surface wear. Rod end and port fittings intact. No visible damage.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov