Description
HBM SP4EC3 100kg Single Point Load Cell 150% Safe Load Limit For Parts
Single point load cell manufactured by HBM in 2002. This strain gauge sensor converts weight into an electrical signal for use in industrial weighing applications.
Specifications & What's Included
- Model: SP4EC3
- Capacity: 100 kg
- Safe Load Limit: 150%
- Minimum Verification Interval: 20g
- Output Type: Strain gauge / analog (4-wire cable)
- Serial: K0205004
- Made in Germany
Applications
Single point load cells like this are mounted directly under weighing platforms in platform scales, checkweighers, and industrial weighing systems. The 4-wire strain gauge design provides stable output for systems requiring direct platform mounting with minimal structural modification.
Condition: For Parts or Not Working
This HBM SP4EC3 100kg Single Point Load Cell is being sold AS-IS for parts or repair. The cable jacket is damaged near the load cell body, leaving all four conductors (black, red, yellow, and blue) fully exposed at the end — as clearly visible in the photos. Because of this wiring damage, the unit has not been tested and its functionality cannot be confirmed. The aluminum body shows surface grime and general wear consistent with prior industrial use, and the label is intact and legible. This cell may be suitable for rewiring, repair, calibration study, or use as a reference unit. Please view our photo set and contact us if you have any questions.
This HBM SP4EC3 100kg Single Point Load Cell is being sold AS-IS for parts or repair. The cable jacket is damaged near the load cell body, leaving all four conductors (black, red, yellow, and blue) fully exposed at the end — as clearly visible in the photos. Because of this wiring damage, the unit has not been tested and its functionality cannot be confirmed. The aluminum body shows surface grime and general wear consistent with prior industrial use, and the label is intact and legible. This cell may be suitable for rewiring, repair, calibration study, or use as a reference unit. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
HBM |
Model: |
SP4EC3 |
MPN: |
SP4EC3 |
Type: |
Single Point Load Cell |
SKU: |
49472 |
Capacity: |
100 kg |
Safe Load Limit: |
150% |
Minimum Load (Emin): |
0% |
Minimum Verification Interval (Vmin): |
20g |
Serial / Lot Number: |
K0205004 |
Year of Manufacture: |
2002 |
Condition: |
As-Is / For Parts or Not Working |
Seller Notes: |
Sold AS-IS; wire jacket is damaged with exposed leads. Not tested. |
Country/Region of Manufacture: |
Germany |
Application: |
Platform scales, checkweighers, industrial weighing systems |
Output Type: |
Strain gauge / analog (4-wire cable) |
Cable: |
4-conductor (black, red, yellow, blue/green) with exposed ends |
Condition Notes: |
HBM SP4EC3 100kg load cell sold AS-IS for parts or repair. Cable jacket is damaged with all four conductors exposed. Unit has not been tested. Suitable for rewiring or repair. Please view photos and contact us with any questions. |