Galvanized All Thread Rod 5/8"-11 TPI Threaded Rod No Hardness Stamp Sold by Ft

Galvanized All Thread Rod 5/8"-11 TPI Threaded Rod No Hardness Stamp Sold by Ft

This is a galvanized steel all thread rod (ATR) with a 5/8-inch diameter and 11 threads per inch (UNC coarse thread). The rod carries no hardness grade stamp. It is offered here surplus and sold by the foot in the cut lengths listed below — contact us before purchasing to confirm the length and quantity you need are still available, as stock changes.

Specifications & What's Included

• Type: All Thread Rod (Fully Threaded Rod / ATR)
• Diameter: 5/8 in (0.625 in)
• Thread Size: 5/8"-11 (UNC — Unified National Coarse)
• Threads per Inch: 11 TPI
• Finish: Hot-dip galvanized (zinc-coated for corrosion resistance)
• Material: Steel
• Hardness Stamp: None (no grade marking)
• Sold by the foot in the following available cut lengths:
  • 44 in — Qty: 4
  • 34 in — Qty: 4
  • 28 in — Qty: 1
  • 12 in — Qty: 18
• Note: available lengths and quantities can change — contact us before purchasing if a specific length is required

Applications

All thread rod in 5/8"-11 UNC is a standard fastener used across construction, mechanical, and industrial applications. The galvanized finish makes it suitable for exterior, wet, or corrosion-prone environments. Common uses include anchor bolts, hanger rods for pipe and conduit, structural connections, concrete form tie work, and general fabrication where a continuous-thread rod is needed. The 5/8"-11 thread mates with standard hex nuts, coupling nuts, and other 5/8"-11 hardware available from any fastener supplier. The absence of a hardness stamp means the grade is not certified to a specific ASTM standard such as A193 or A307 — buyers requiring a documented grade for structural or code-governed work should source certified material; this rod is well suited to general-purpose shop, maintenance, and construction use where grade certification is not required.